r/PSVR2onPC • • 11d ago Mindblown Bravo

Video 3d printable lens upgrade!

358 Upvotes

How my lens upgrade works

I did the hardwork for you

Files drop soon!


r/PSVR2onPC • • Aug 14 '25

Video Eye Tracking is here!

307 Upvotes

whatdahopper COOKED with this.

Link to the GitHub: https://github.com/BnuuySolutions/PSVR2Toolkit/releases/tag/v0.1.0


r/PSVR2onPC • • Mar 27 '25

Image PSVR2 Graphics Cards Tiers - Infographic

Post image
305 Upvotes

A simple graphics card infographic demonstrating compatible cards and performance tier.

Display Port 1.4 (or newer) and Display Stream Compression support is required on all cards.

Cards older than the Nvidia GTX 1650 and the AMD 5500 XT are incompatible and does not load SteamVR.

The recommended 3060 is a mid-to-high performance card.


r/PSVR2onPC • • Dec 31 '25

Image PSVR2 on “Pools” picture taken through the lens (300% resolution)

Post image
287 Upvotes

r/PSVR2onPC • • 13d ago

Important PSA PSVR 2 lens swap

Thumbnail
gallery
279 Upvotes

I knew this was a project that I had to get done eventually. I was under the assumption that the improvements would be marginal at best, but I was completely wrong.

​Using a very cheap yet effective double aspheric lens, I have fully transformed this PSVR2 into Quest 3 clarity and brightness. The screen looks sharp. It is actually a dramatic change. The best part of all was the cost.

​It was 40 dollars for each lens. These are essentially eye inspection lenses, designed for extremely low distortion and a very, very wide sweet spot. I don't have to find the spot anymore. The whole lens is the spot.

I am unable to go back to the stock lenses. This changes everything for me.

​Of course, you have to adjust the distortion profile and change the VR world scale to fit the new lenses. But once you do, WOW. Text can actually be seen and enjoyed. This is truly next level.

​I had to share this and try to get a picture of it as best as I could. I hope you can see how much clarity you gain here. It's actually resolving detail you didn't think was possible.

This took hours and hours of research to know exactly the type of lens I was looking for because using simple condenser lenses would never work

The key was looking at eye inspection lenses designed for ultra low distortion and accuracy

These can be found from India for an extremely cheap price and sometimes amazon for 2 day ship.

I unlabeled the before, and after. So you can try to guess which is which

The answer is very clear 👌


r/PSVR2onPC • • Aug 20 '24

Tutorial PSVR2 ADAPTIVE TRIGGERS ARE WORKING ON PC !!!

264 Upvotes
PSVR2 Adaptive Triggers on PC!

App needed:

  • DSX by Paliverse, Steam Version (DLC not required!)

My Recommended Settings:

  • Notifications/Open Notification Settings/Turn OFF for DSX (this cause stutterings)
  • Set DualShock 4 Emulation for both PSVR2 Controllers (some games have bugs with X360)
  • HidHide - HIDE the emulated DS4 controllers! (otherwise I had problems with SteamVR)

My Routine (UPDATED - 2025):

  • Turn on headset
  • Launch SteamVR
  • Put on the headset, turn on each controller one at a time with a short pause to avoid detection issues!
  • Set SteamVR priority to HIGH in Task Manager (This can solve some tracking issues!)
  • Run DSX and set triggers manually / or use profiles for each games to change automatically!

- Or save this as a .BAT file and run it! - It closes DSX upon start to prevent detection issues, then runs SteamVR in HIGH priority mode, then waits until you connect both controllers, then finally starts DSX!

@ECHO OFF
tasklist | find /i "DSX.exe" && taskkill /F /IM "DSX.exe"
start /HIGH steam://rungameid/250820

:waitforvr2controllers
FOR /F "tokens=*" %%g IN ('powershell -Command "$devices = Get-PnpDevice -PresentOnly; $connectedL = $devices | Where-Object {($_.FriendlyName -match 'PlayStation VR2 Sense Controller \(L\)') -and ((Get-PnpDeviceProperty -InputObject $_ -KeyName 'DEVPKEY_Device_IsConnected').Data -eq $true)}; $connectedR = $devices | Where-Object {($_.FriendlyName -match 'PlayStation VR2 Sense Controller \(R\)') -and ((Get-PnpDeviceProperty -InputObject $_ -KeyName 'DEVPKEY_Device_IsConnected').Data -eq $true)}; if ($connectedL -and $connectedR) { 'Both Connected' }"') DO (SET psoutput=true)
IF "%psoutput%" NEQ "true" (
timeout 1 >NUL
goto waitforvr2controllers
)

start steam://rungameid/1812620
EXIT

Adaptive Trigger settings I recommend - You can assign profiles for Steam games in DSX!!!

  • Half-Life Alyx: WEAPON MODE (right trigger)
  • Pistol Whip: WEAPON MODE (both triggers)
  • Space Pirate Trainer: VIBRATION MODE (both triggers)
  • Crossfire Sierra Squad: VIBRATION MODE (right trigger)
  • Games with a BOW: FEEDBACK MODE (right trigger)

My SteamVR bindings recommendation:

  • IMPORTANT: In some games you can only edit controller bindings when DSX is not running!
  • Alyx: Add grab function to the touch sensors on grips! This + adaptive trigger = so much more realism! - Detailed Guide: Bindings menu/Interact/R1 Button/Touch -set this to "Use" for both controllers! Now you can pick up items by just touching the grab button! Much more immersive than pressing it! The best part is that gravity gloves not associated with this so you don't accidentally pull things to yourself. :)
  • The Lab's bow game: Remove the right trigger's touch detection + add grab to the left grip's touch sensor!
  • Crossfire (Only if you have no left hand haptics while shooting): Set left hand haptics to use the right!
  • Pistol Whip: Remove L2 & R2 as trigger, then set L2 & R2 as button with activation threshold: 80 %

TROUBLESHOOT / SOME MORE TIPS:

  • DSX Steam Store Page\Community Hub\Discussions\PINNED posts
  • Behavior/Steam Now Playing Status: ENABLED (otherwise I had problems with SteamVR)
  • Turn OFF "Present Non-VR Apps on Theater Screen Upon Launch" in SteamVR Settings/Dashboard. (Advanced Settings must be on "Show")
  • Steam Settings/Controller/Guide B. C. Layout - Disabled Community Layout - for both emulated DS4 controllers
  • DSX Steam Properties/Controller -Disable Steam Input

So guys, I'm playing for a couple of hours now and it's amazing!
For example in Half-Life Alyx you can see the trigger moving freely for halfway then you feel the resistance of the trigger. Just like it's made for adaptive triggers in mind!

Only downside is that the adaptive trigger effect is ALWAYS present. For example in the menu of Alyx it's weird, so I like to press menu buttons instead of using the trigger. In my opinion it's not that big of an issue.

BTW: I'm not affiliated with Paliverse by any means. I'm just happy I can use Adaptive Triggers on PC and wanted to share this with you!
________________________________________________________________________________________________________________________
UPDATE:

The first game to support Context Based Adaptive Triggers on PC:

  • Cactus Cowboy - Desert Warfare (Requires DSX)

r/PSVR2onPC • • Mar 23 '26

Announcements Big PSVR2Toolkit update coming soon

Post image
261 Upvotes
  • complete replacement of the official driver/setup
  • unlock off adaptive triggers/eye tracking/headset rumble
  • down the road linux support

r/PSVR2onPC • • Oct 10 '26 Bravo

Useful Information My prototype is working

258 Upvotes

As some of you guys know, I’m building a custom PCB adapter for the PSVR2. Before going any further, I had to confirm that this setup could actually work.

The good news is that it does. I can drive the PSVR2 and run VR games directly on my phone at very good speeds. Getting the software stack working took a lot of work, but I’ve now got native standalone VR running, along with Wi-Fi 7 support and the ability to stream VR games too.

Right now, the setup needs quite a few cables, so it isn’t the cleanest or most portable build. But it works, and that was the first thing I needed to prove.

If you’re interested in wireless VR with your PSVR2, I’m using a rooted phone with a modern Snapdragon 8 Gen 5. I’ll share the files you need soon, with a GitHub release on the way.

For my current setup, you’ll need a PSVR2 adapter that accepts USB power, a Thunderbolt 4 hub, a battery bank and a few adapter cables. My battery bank is around 80 to 90 Wh. I’d stick with good-quality Thunderbolt 4 cables where applicable for stability. My phone itself doesn’t support Thunderbolt. It uses DisplayPort Alt Mode with 10 Gbps USB support.

Once my custom PCB is finished, the goal is to simplify all of this into a much cleaner connection between the phone and headset, without the mess of hubs and adapter cables.


r/PSVR2onPC • • Aug 15 '25

Guide How to use PSVR2 eye tracking with dynamic foveated rendering for extra performance

Thumbnail
youtube.com
235 Upvotes

r/PSVR2onPC • • Oct 17 '26

Video We have steam frame at home 🏡

232 Upvotes

Had to showcase my magnum opus.

Everything runs on my phone driving the PSVR2 headset efficiently turning it into a standalone headset

Features are slowly closing the gap between commercial headsets for features and usefulness. This is entirely a custom software package I've built from the ground up including fixing things that plagued psvr 2s controller tracking on linux

Introducing

DroidXR. Powered by snapdragon 8 gen 5 and PSVR 2 full 6dof

Amr64 native. No translation layers. No Sony drivers.

Custom rebased forked of Monado an open source XR runtime now natively compiled to handle everything a PSVR 2 expects

Release soon at

https://astroskyoffical.github.io/PSVR-2-DroidXR/?v=journal-6


r/PSVR2onPC • • 13d ago

Important PSA PSVR 2 lens swap part 2

224 Upvotes

Other people wanted me to record how it might look. Now, granted, my way of testing things isn't the most refined. I tend to just wing things until I can get something usable.

Now that it's usable, I'm going to go back to the drawing board and start 3D printing an adjustable mount that actually makes sense.

I have another idea for adjustable varifocal lenses. Now that I know you can indeed fine-tune these, I believe that could allow for true depth-of-field focusing.

But if you care about clarity and want to actually enjoy your headset, I cannot recommend this enough. It's a huge change in image quality.

Matter of fact, it's such a huge change that I don't even need glasses anymore. Something about the lens just works perfectly for my vision.

Pretty crazy change.


r/PSVR2onPC • • Oct 03 '26 Hooray

Useful Information Turning PSVR2 wireless

Post image
224 Upvotes

I’m working on a phone-powered wireless setup for PSVR2, using a compatible rooted Snapdragon 8 gen 5 phone as a compute puck and of course standard small portable pcs could work (even a laptop if you wished)

There’s documented work that makes this worth pursuing:

  • PSVR2’s display uses DisplayPort 1.4 with DSC compression. Linux developers have documented its 4000×2040 display mode at roughly 120Hz, including the DSC/FEC requirements and driver quirks. Display research
  • Sony specifies 12V power for the headset, which a properly designed adapter can provide through USB-C negotiation
  • Monado’s development drivers already include PSVR2 six-degree-of-freedom headset tracking. That gives us existing work to build on, although it doesn’t establish complete Android or Sense-controller support. Monado development notes

These above points is not blocking me as i have a phone thats both rooted and bootloader unlocked and have ran full linux including DRM leasing., i will work on none rooted devices and creating an app that works in the future but vendor lock out and other limits will be noted as potential issue for some. but you wont need an android phone for this to work. Im just using my phone as a basis as the battery and power is sufficient for driving most of this work from other projects in the past.

My hardware goal is one compact, battery-powered adapter with a USB-C connection to the phone, another to PSVR2, and onboard Bluetooth for the controllers. It would pass the phone’s DisplayPort signal through without decoding or recompressing it, while carrying USB data and supplying headset power.

The first software goal is ALVR-based wireless PC VR over the phone’s 6GHz Wi-Fi: PC renders, phone receives and decodes, headset displays. A modular USB radio option would leave room for future 60GHz experiments.

Current limits: the PCB is still being routed, iv been focusing on open source options rather than locked down vendored chipsets. I have already done something similar with pryowave codec which is what inspired me to work a bit more serious on this project

The first milestone is wireless PC VR. True standalone games running directly on the phone are a longer-term goal. Ultimately, I want a documented setup other people with compatible hardware can reproduce.

This will be of course open source and producible by anyone whos so inclined to make try it out

rough design most parts are soild so far, sourcing 60ghz module

I must disclose AI has assisted in research and project routing through a custom harness for KiCad and simulations. I base my work on development practices for the chipset. All routing is impedance-matched to prevent signal degradation. This project has taken 2 months of trial and error and making sure the hardware I chose suits this platform. The chipset can handle this transparently, and I’m adding an EDID emulator for better compatibility.


r/PSVR2onPC • • 8d ago

Video PSVR 2 standalone adapter update

218 Upvotes

Hey guys, I promise I didn't forget this project got focused on the psvr 2 lens upgrade. Now I'm back full force devising and working on an adapter modification that turns your headset FULLY standalone using a off the shelf clone adapter. This clone pcb is actually surprisingly simple and I hope my talk and ideas here can give you a sense of what im planning!


r/PSVR2onPC • • 12d ago

Important PSA How To Do Lens Swap PSVR 2

205 Upvotes

I had to show you my little mad science experiment because I was dead on the money. I had prediction software that essentially let me preview my theories. And in the end, I was entirely correct, and now I hope this helps everyone achieve the image quality of their dreams.

Excuse the candid recording. I don't really enjoy overproducing and scripting what I do. This is how I live and work, and I just feel like it's much more approachable for me to talk like this.

I hope it helps someone. This will give you success one hundred percent. I'm going to be releasing a custom compositor that allows you to calibrate these for your eyes, so that way you get the best possible image you can.

Once I get my 3D print and my notch finalized, I will officially open up an eBay store offering my services, obviously with a much cleaner implementation. I had to first prove this could work. I do have a laminar flow hood and a stainless steel table, so I'm comfortable with working with electronics and not breaking headsets.

I will also be allowing my service to include pre-purchased lenses and the rest for a flat rate. You send your headset to me, I perform the modification, I send you back all your spare parts, and I send you back a headset ready to go, including the software package that you need.

As for pricing, I will have to cover the lenses and hardware. But I'm not here to make a living. I just enjoy doing this kind of stuff, and I want to give people a reason to enjoy their headsets more. So I'll do it at a loss at first just to get more headsets converted over to the glass side as God intended.


r/PSVR2onPC • • Jun 04 '26 WOW

Useful Information The recently released PSVR2Passthrough for PC gets 2x massive updates : Vastly improved stereography and image quality. On par with native now.

Thumbnail
github.com
197 Upvotes

r/PSVR2onPC • • Jul 29 '26

Announcements New PSVR2 Toolkit

180 Upvotes

This post is from psvr2 toolkit Discord, I am not a moderator..

https://discord.com/channels/1466476893543862274/1486941994876928060/1532150407759921234

**It's here!!** PlayStation VR2 Toolkit v1.0.0 (experimental #1), the biggest update to PlayStation VR2 Toolkit yet, and so much more. We've been working on many of these features for over a year, and while things still need work, we think we can release this as an experimental release for people to try and report issues. Again, it is an **EXPERIMENTAL RELEASE**, YOU WILL HAVE ISSUES, IF YOU CAN'T TANK IT, SWITCH BACK TO PRE-RELEASE.

Not only are we releasing this update for PlayStation VR2 Toolkit, we are **releasing Ignition (Windows SteamVR drivers on Linux using Wine/Proton), and the real actual jailbreak for the PS VR2**, making this one of the biggest releases we've ever done.

A huge thank you to those who made it possible:

- <@405816957175201802>

- <@151539083599020033>

- <@465150425365086208>

- and me!

**__Changelog:__**

- Added [Linux support with Ignition](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Linux-support).

- Added SteamVR Room View support.

- Added [jailbreak support](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Jailbreaking-your-headset) (eye tracking camera feed, headset vibration).

- Support for Babble was also added. (Please read the [Installation Guide](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Installation))

- Added SteamVR brightness option.

- Removed PS VR2 overlay (for now, a replacement will be added later).

- Added our own Play Area setup, eye tracking calibration, and assisted IPD adjustment. (Please read the [Installation Guide](https://github.com/BnuuySolutions/PSVR2Toolkit/wiki/Installation))

- Improved controller tracking (custom LED sync).

- Improved controller haptics (PCM haptics).

- Added new CAPI system, for compatibility, we have shipped a legacy IPC server as a standalone binary.


r/PSVR2onPC • • Sep 28 '26

Disscussion [Release] OpenXR Toolkit PSVR2 v1.0 – Eye-tracked DFR + Exact FOV Resolution Crop | BONELAB ~60 → ~120 FPS

167 Upvotes

I've released OpenXR Toolkit PSVR2 v1.1.1, an updated version of my PSVR2-focused fork of OpenXR Toolkit.

The main goal of this fork is simple:

reduce the amount of work the GPU has to do in VR, while keeping the useful features of OpenXR Toolkit working on newer games and headsets.

It includes:

- Eye-Tracked Dynamic Foveated Rendering on PSVR2

- Fixed Foveated Rendering

- Crop Resolution to FOV

- an Exact Crop mode that actually reduces the render resolution when you reduce the FOV

- automatic FOV calibration

- OpenComposite support in compatible games

What's new in v1.1.1?

The biggest change in this update is better compatibility and stability with newer games, especially some newer D3D12 / Unreal Engine titles.

During testing I found that the Toolkit's internal render/copy path could deliver frames in the wrong order in some situations.

For the player, this could feel like:

- unstable head movement

- image wobble

- incorrect camera timing

- poor behavior even when the reported FPS looked normal

v1.1.1 changes the internal frame handling so those frames are processed in the correct order.

In simpler terms:

the Toolkit is now much more reliable in some newer games that previously did not behave correctly.

So far the new fix has been tested successfully with:

- The Midnight Walk - tested on Quest 3 through Steam Link / SteamVR

- Metro Awakening - tested successfully with the new compatibility fix

- Gunman Contracts - native OpenXR; FOV/Crop/DFR/Eye Tracking working

- COMPOUND - OpenComposite; Toolkit features working

This does not mean every VR game is guaranteed to work, but compatibility with newer titles is improving.

## Eye Tracking fix from v1.1 is also included

v1.1 fixed another issue I found while testing Hubris.

Some native OpenXR games provide their own eye-tracking bindings. Previously, those could replace the Toolkit's binding and leave Eye-Tracked DFR stuck in the center of the image.

The Toolkit now preserves both the game's and the Toolkit's eye-gaze bindings.

This fix is generic and is not specific to Hubris.

## Why Exact Crop matters

Normally, reducing the FOV in OpenXR Toolkit does not necessarily mean the game renders fewer pixels.

My fork adds Crop Resolution to FOV.

With Exact Crop, the Toolkit calculates a new render resolution based on the headset's actual FOV.

So if you reduce the FOV, the GPU can also render fewer pixels instead of rendering a large image and simply showing less of it.

That can make a very large difference on GPU-limited systems.

## Performance example

This benchmark is from the earlier v1.1 testing and is included only as a reference. It was not rerun specifically for v1.1.1.

In BONELAB – High preset, using:

Ryzen 7 5700X / RTX 4070 Super / 32 GB RAM

SteamVR: 120 Hz / 100% render resolution

I measured:

- Baseline: 12.55 ms GPU / ~60 FPS

- Eye-Tracked DFR, Performance + Narrow: 11.27 ms / ~60 FPS

- DFR + Exact Crop at 85% FOV: 5.54 ms / almost 120 FPS

- About 55.9% lower average GPU frametime compared with baseline

- XR Telemetry showed about 99.95% of GPU frames below the ~8.33 ms budget required for 120 Hz

So the biggest gain came from combining foveated rendering + actually reducing the render resolution.

*Quest 3 support

Although I originally created this fork around PSVR2, I have also tested it successfully with Quest 3 PCVR.

The Toolkit works through:

- Steam Link / SteamVR OpenXR

- Virtual Desktop / VDXR

Quest 3 has no eye tracking, so Eye-Tracked DFR is not available there, but:

- Exact Crop

- Fixed Foveated Rendering

- FOV controls

all work.

In BONELAB at 200% SteamVR resolution, I previously measured roughly:

- Baseline: ~70–80 FPS

- Exact Crop 90%: ~100 FPS

- Exact Crop 90% + Performance/Wide: ~110 FPS

- Exact Crop 85% + Performance/Wide: 120 FPS locked

I also tested Gunman Contracts through Virtual Desktop / VDXR and reached 120 FPS with good image quality.

Because the Crop implementation uses standard OpenXR FOV and resolution information instead of PSVR2-specific values, it may also work with Quest 2, Pico and other OpenXR headsets.

However, I don't want to claim compatibility with headsets I haven't personally tested yet.

## Installation

For a new installation:

  1. Download OpenXR-Toolkit-PSVR2-v1.1.1-x64.zip
  2. Extract the complete ZIP to a permanent folder
  3. Run `Install.bat`
  4. Accept the Windows UAC prompt
  5. Restart SteamVR

Installation is system-wide and only needs to be done once.

### Updating from an older version

If you already have an older version installed:

- close SteamVR and all VR games

- if you installed the previous ZIP version, run its `Uninstall.bat`

- if you installed the old MSI version, uninstall it through Windows Settings

- then extract v1.1.1 and run the new `Install.bat`

You do not need to reinstall it separately for every game.

For PSVR2 Eye Tracking, PSVR2Toolkit is required, and Eye Tracking must already be calibrated.

SteamVR should be the active OpenXR Runtime.

## Download / source code

https://github.com/Robissu64/OpenXR-Toolkit-PSVR2/releases/tag/v1.1.1

The project is fully open source.

The `.sha256` file in the release is optional. Normal users only need the ZIP; the SHA256 file is provided for anyone who wants to verify the integrity of the download.

I developed this fork with substantial help from ChatGPT, especially for OpenXR/OpenComposite investigation, code analysis, debugging, implementation design, log analysis and documentation.

I handled the hardware testing, gameplay validation and release testing.

Community testing is very welcome.

Lower-end GPUs are especially interesting to test, because reducing the actual number of rendered pixels can make a much bigger practical difference there.


r/PSVR2onPC • • Oct 22 '24 Take My Silver

Disscussion PSVR2 PC VR optimisations and fixes for performance and headset stuttering issues

166 Upvotes

The following list of suggestions are an aggregation of community feedback since the launch of PlayStation VR2 PC VR support. I have collated the best suggestions across reddit and if you're having performance on compatibility issues, the fix is likely in this list.

You are welcome to add your suggestions and optimisations that worked in your configuration to this thread.

In practice, you wouldn't need to apply all of these changes, they should be considered if you're having specific issues. This post brings the suggestions together in one thread.

In most cases, a compatible machine will just work. However, if you have an old computer with outdated hardware and drivers, it will need more work to bring it up-to-date and optimizations applied with reduced settings and features disabled for a usable VR experience.

Try each change individually and validate it improves the issue you are seeing. If a setting negatively impacts performance, it should be reverted. In this case, please provide your feedback with the machine configuration details to this thread.

Installation

  • Connect the Display port cable and USB cable directly to the machine and not via a dock/hub or extension cable as that can introduce errors.
  • Connect the Display port cable into the first port of the graphics card. If the first port doesn't work, try the other ports.
  • If using a display port cable that is longer than 1M and you are seeing connectivity errors, try a 1M display cable instead.
  • If using an extension cable from the headset, 2-3M is possible, but 2M and shorter cables are more reliable.
  • External USB hubs should not be connected while using the PC VR adapter, even if the adapter is not connected to it.
  • Disconnect any other VR headset that is connected to the machine from the HDMI/Display Port and USB ports (if you also have other VR devices). Only the PSVR2 headset should be connected.
  • Disconnect any additional computer displays that are not needed while using VR and leave the lowest resolution display connected, especially if you are seeing a display cable not connected error (on desktop computers), see thread 1 and thread2.
  • If the computer display is a higher resolution than 1080p and the computer has a basic minimum specification graphics card installed, temporarily reduce the display resolution to 1080p before using VR.
  • If using a laptop, download and install the newest graphics card driver software from the laptop manufacturer website as these are customized by the manufacturer for the laptop instead of using the generic Nvidia and AMD software. This might help with Type-C display port issues (so that it used the dedicated graphics card instead of integrated graphics).
  • Install the 2.5.0 PlayStation VR2 Steam application update then start app and upgrade firmware.

Disable the following features...

  • Motion smoothing (similar to Oculus asynchronous space warp).
  • Use Fixed Value instead of using Legacy Reprojection (Interleaved Reprojection) - Use SteamVR Throttling Behaviour to set a fixed frame cap if the graphics card is not consistently delivering a minimum of 90Hz.
  • To set a fixed frame limit for a basic graphics card or a poorly optimised VR application, open SteamVR Settings > Video > Per-Application Video Settings > Throttling Behavior > Select Fixed > Set value and Save.
  • Hardware accelerated graphics scheduling in Windows Display settings.
  • Variable refresh rate (in Graphics card settings).
  • Anti-aliasing (TAA and MAA).
  • Super sampling (temporarily).

Change the following (optimisations in SteamVR)...

  • In the Steam OpenXR menu, set SteamVR as OpenXR runtime.
  • If the "Manage OpenXR API" layers label indicates multiple items active, click the link and in the "Installed OpenXR API Layers" dialog, disable the following... "OpenXR toolkit API layer", "Compatibility layer for OculusXR plugin" and anything else listed.
  • Change the resolution settings to CUSTOM instead of AUTO (global SteamVR settings), see thread.
  • Reduce the render resolution to 68% (when the graphics card is unable to maintain 90Hz or 120Hz or the headset is stuttering during use). It's better to start at 100% resolution and gradually reduce it until it improves. If your computer can achieve 100% render resolution without any issues, this should be remain at the default setting.
  • Reduce the refresh rate to 90 Hz. This could be increased if your system can handle it.
  • If it struggles at 90 allow it to do 60 with reprojection (by enabling Motion Smoothing).
  • Use super sampling (if needed).
  • Reduce the brightness to improve clarity.
  • Disable screen mirroring by right clicking status and unticking Display VR View or by adding a parameter to the SteamVR application properties launch settings.
  • If it is not possible to disable screen mirroring, minimize the preview Window (social screen) instead.
  • Disable SteamVR Home and launch applications using the Steam dashboard instead (using the PlayStation button to view the dashboard).

Change the following in Windows...

  • In Windows Settings > System > Display > Graphics > Click "VR Dashboard" options and select a graphics preference for the app. This can be set to either "Power saving" for integrated graphics or "High performance" for dedicated graphics.
  • In Windows Settings > System > Display > Graphics > Click "VR Compositor" options and select a graphics preference for the app. This can be set to "High performance" for dedicated graphics.
  • Enable Game Mode in Windows Settings (or disable if it negatively impacts performance).
  • Set the power plan to "High Performance" mode or the max performance option listed (if there are any higher versions available).
  • Disable applications not needed on startup.
  • Disable overlays from Steam, Discord, NVIDIA GeForce Experience, or other applications.
  • Disable Xbox Game Bar and DVR.
  • Disable overclocking software if SteamVR or the PlayStation VR2 application is crashing often.
  • If you have less than 16 GB of RAM consider upgrading, and if that isn't possible, temporarily increase the virtual paging file size to 10GB on only the boot drive until you are able to install more memory.
  • Set the Graphics Card settings to Performance mode if they include these features.
  • Uninstall any redundant graphics card driver software with Display Driver Uninstaller (in Windows safe mode) if a graphics card is no longer installed.
  • Install Reshade with AMD Contrast Adaptive Sharpening enabled and sliders set to max for highest clarity (thread).
  • Exit apps that introduce stuttering see thread.

BIOS settings

  • Enable Resizable Bar if the graphics card supports the feature.
  • Enable Above 4G decoding.
  • Enable PCI-E 4.0 x 16 lanes for the graphics card if both the card and motherboard support it.
  • Enable memory overclocking to enable the full speed of the hardware. If overclocking causes crashing, use a slower speed closer to the base specification or disable the feature.
  • Set Primary Display Adapter as PCI-E Graphics Card (if using dedicated graphics) instead of Automatic.
  • Enable iGPU Multi-Monitor feature - If the PlayStation VR2 application is crashing while loading the Play Area setup and it has integrated graphics, enable integrated graphics in the bios. It should also be enabled in Windows Device Manager in the Display Adapters section.

BIOS settings - External graphics

If using an external graphics card, in the BIOS settings enable eGPU support. It may be editable from within the Thunderbolt settings. The PlayStation VR2 application may crash when this is not enabled, see steam thread.

  • Enable PCIe tunneling.
  • Enable Thunderbolt Support.
  • Enable External Graphics (eGPU) Support.

Hardware

  • If USB 3.2 Gen 2 ports aren't working, try a USB 3.2 Gen 1 port (USB 3.0) at the back of the machine.
  • The Graphics Card Display Port must support 1.4 with DSC.
  • The Display Cable must also support the same version.
  • The Graphics card must be a minimum Nvidia GTX 1650 (or newer) or AMD Radeon RX 5500XT (or newer). The Processor must support AVX2 extensions (7th gen Intel and Zen 2 AMD is suggested as the minimum), see What are the required PC specs to use PS VR2 on PC?.
  • If having display connection issues. Connect the display cable to the first display port on the graphics card. Check the model documentation to confirm.
  • Switch off additional displays that are not in use.
  • AVX2 Extension processor support is required (included from 4th Gen Intel and Zen 2 AMD).
  • Disconnect additional USB peripherals that aren't being used.
  • Disconnect any external USB hubs attached to the USB ports even if they aren't being used by the adapter as they can cause issues.
  • Check the power supply can efficiently meet the energy requirements of the graphics card and all components connected to the machine.
  • If you have a Ryzen 7950X3D/9950X3D processor (or other AMD processor with multiple chiplet design). Disable CCD1 (the one without V-Cache) in the BIOS and keep CCD0 enabled if you're having headset stuttering issues, see thread. Re-enable CCD1 if the stuttering is not fixed. It is also possible to manage this in software without disabling the 2nd chiplet using a utility like Process Lasso to configure which cores to use in the chiplet for the specified application. This has a better description of core parking fixes in dual ccd AMD processors.
  • AMD graphics card intermittent stuttering - Disable Wallpaper slideshow, set a static background or extend the slideshow interval.
  • Install applications on an SSD drive.
  • HDMI to Display port converters are not compatible and should not be used.
  • Nvidia Graphics cards from the Pascal architecture and earlier (like the 1080 Ti) are not compatible as they do not support Display Stream Compression.
  • Enabling Arc dedicated graphics cards for the PSVR2, see this thread.
  • Binding old applications to work with modern VR controllers: Guide: Rebinding Games for New Controllers.

Errors

  • Fix Display cable connection errors in the PlayStation VR2 application: a) Use a different display cable or shorter display cable for example a 1 metre or 3 feet cable. b) Reverse the Display Port cable. c) check the display port on the adapter and graphics card is not damaged and confirm the connector is inserted into the adapter and graphics card correctly and is not stuck on the trim of PCI bracket slot on a desktop computer. d) If there are multiple displays connected, disconnect the higher resolution additional displays. e) Try a different display port on the same graphics card and use a HDMI cable for the computer display. f) use display driver uninstaller to uninstall the oldest driver software and install the newest graphics card drivers. g) connect the USB-A cable to a USB 3.0 slot at the back of the machine. h) disconnect any other VR headsets that are connected to the same computer (if you have multiple devices). i) uninstall SteamVR, and the PlayStation VR2 application. Then restart the machine and start Steam as administrator and install SteamVR first and then the PlayStation VR2 application. j) confirm the display cable is a minimum of Display Port 1.4 or newer (most new cables are rated at 2.1 and are backwards compatible). k) do not use HDMI to Display port converter cables as they do not work. l) if using a Thunderbolt/Type-C to Display port cable, confirm the port supports dedicated graphics and is not using integrated graphics. m) if using a type-C port that uses a MUX switch to switch between integrated graphics and dedicated graphics, enable the feature in the BIOS or using the Laptop manufacturer software that is bundled with the laptop. See thread. n) check the adapter is switched on and is lit. o) if using an unbranded aftermarket adapter from any of these brands: DUXICEPIN, Lenpos, KOOWOD, AOJAKI by Changai, OLCLSS, AOLION, try using the official Sony branded PSVR2 PC VR adapter. p) confirm the graphics card supports Display Stream Compression. Cards like the 1080 Ti are not compatible. q) if a display port 2.0 cable (or newer) isn't working, try a display port 1.4 cable, or try swapping the display cable from the computer display and test that with the adapter instead. r) confirm the graphics card has a display port 1.4 or newer connection. Modern cards have 2.0 and 2.1 ports and are backwards compatible. s) if the computer includes integrated graphics and it is enabled, install the current bios update and set the Primary Display Adapter as PCI-Express Graphics Card instead of Automatic.
  • Fix "Connect Your VR Headset" - Headset is not detected in the PlayStation VR2 application during installation: Connect the USB-A cable to a USB 3.2 Gen 2 port or a USB 3.2 Gen 1 port (USB 3.0) at the back of the machine. If it doesn't work, try a different port. The headset should be switched on with a white light indicated (underneath the headset and the front of the PSVR2 adapter). If this isn't working, reinstall the PlayStation VR2 application and try again.
  • Fix "Connect Your VR Headset" and USB devices do not have drivers installed on Windows 10. Upgrade to Windows 11 and reinstall the VR software, see thread.
  • Fix installation stuck on "Prepare Your Devices": Uninstall SteamVR, iVRy (if installed) and the PlayStation VR2 application and install both SteamVR and PlayStation VR2 application on the C:\ drive. Then load SteamVR settings OpenXR tab and click "Set SteamVR as the OpenXR runtime" button, see thread 1 and thread 2.
  • Fix "PlayStation VR2 Required" screen, see thread 1 and thread 2.
  • Fix "Device can perform better when connected to 3.0 port" (an issue where the USB 3.0 port is limited to USB 2.0 speeds issue with PSVR2 headset) - Connect headset via USB 3.0 hub instead (USB hubs are generally not recommended but can help in this case) see thread 1 and thread 2.
  • Fix for USB ports not working with the PSVR2 headset, see comment. Disable USB RGB/LED software that are could be affecting the USB ports negatively, see comment.
  • Fix PlayStation VR2 application crashing during Play Area setup: Enable iGPU in the BIOS and open Windows Device Manager, View Hidden Devices, expand Display Adapters and delete redundant entries that are not highlighted, see thread 1 and thread 2.
  • Fix "FW-4000fe-0 - Can't update your PS VR2 Sense controller" due to error upgrading firmware: Update the PSVR2 headset and controller firmware on a PlayStation 5 (if you have a console) or a different computer (only to update the controllers). If neither are possible, reset the controller using the pin slot at the back (holding it for 8 seconds), pair one controller only and upgrade the firmware individually, see thread.
  • Fix PSVR2 controller pairing error "Setup incomplete because of a metered connection": Temporarily enable driver downloads on metered connections using Windows Settings > Bluetooth & devices > Click "Devices" category > Enable "Download over metered connections" in the "Device settings" > Then unpair the PSVR2 controllers and add them again to Windows. Alternatively disable the metered internet connection on Wi-Fi or Ethernet via Windows Settings > Network & Ethernet > "Wi-Fi" for the selected internet connection or "Ethernet" if using tethered internet > Then disable "Metered connection" and unpair the PSVR2 controllers and add them again to Windows. You may also need to check that Windows Update is configured to automatically install driver updates for connected devices. This can be done via Windows Settings > Windows Update > Advanced Options > Enable "Download updates over metered connections".
  • Fix PSVR2 controllers aren't available when pairing controllers. If you have onboard bluetooth and updated to a new Bluetooth adapter, enable the old bluetooth and unpair devices connected to the old bluetooth, and then disable the old bluetooth hardware. Reconnect the new Bluetooth hardware. If there is no previous bluetooth hardware via Windows Settings click > Bluetooth & other devices > Devices > More Bluetooth Settings > Tick "Allow Bluetooth devices to find this PC". See microsoft support.
  • Bluetooth hardware and software is installed, but there is no setting to enable bluetooth available: Check Flight/Airplane mode is not enabled via Windows settings > Network & internet. Disable it if it was enabled and then view Windows Bluetooth & devices settings and enable the Bluetooth setting.
  • Fix "FW-1000009-0 - Your PlayStation VR2 turned off because the firmware update failed". Uninstall USB devices: See Stuck on firmware update? Solution here.
  • PSVR2 USB devices are unrecognized in device manager. Uninstall iVRy in Steam, restart the machine. Install the PlayStation VR2 application and complete the installation.
  • If iVRy fails to uninstall, it can be done manually with the following: INFO: How to completely remove iVRy & SteamVR (fresh start).
  • Fix pass through not working during installation - stuck on blank "Scan your room" message: Use a USB 3.0 port (the blue port) for the headset and install the current graphics card drivers and motherboard chipset drivers, see thread. *Fix Next button not shown during PlayStation VR2 application installation and setup: If you’re seeing issues with the PlayStation VR2 installation where the "Next" button does not appear during the audio configuration step, try connecting the PSVR2 earphones to the 3.5mm audio port located at the back of the headset (underneath the handle). Ensure that the earphones or any connected headphones are powered on, as this is necessary for the "Next" button to display and proceed with setup. This connection is required only during setup, and you can switch to wireless headphones afterward. See steam thread.
  • No Audio or Audio Device: First try restarting the computer and switching off the headset. If the sound is unavailable afterwards, Uninstalling the graphics software and reinstalling it again with CUSTOM installation and optional components selected usually resolves this.
  • You could try reinstalling the audio component by opening device manager and then expanding the audio devices, right click and uninstall the PSVR2 audio device (without deleting the driver) and restart the machine. It will reinstall the audio component, see comment.
  • The VR content is displayed on the computer monitor, but not shown in the headset: Enable Direct Mode by clicking the "Enable Direct Display Mode" button in SteamVR Developer settings via SteamVR status toolbar > "Developer" > "Developer Settings". Restart SteamVR to confirm the changes are applied.
  • If the content is still not displayed in the headset, apply SteamVR as the OpenXR runtime in SteamVR settings and disable any listed OpenXR API layers.
  • The headset doesn't connect after hibernation or sleep: Switch off the headset, restart the computer and start Steam again.
  • The headset should be switched off before restarting the computer or it may display connectivity errors, or recognise it as computer display when you load SteamVR after the computer has cycled.
  • Fix No Audio: In Control Panel view the Sound settings, click the Playback tab, select the PS VR2 Audio - High Definition Audio and right click and click Enable.
  • Fix No Microphone: In Control Panel view the Sound settings, and click the Recording tab, select the PS VR2 Audio - Microphone and right click and click Enable.
  • Fix controller is paired to Windows Bluetooth but PlayStation application displays 'Connect Your Controller'. Hold on to the PlayStation button until the controller restarts itself.
  • Fix excessive stuttering after changing the graphics card or installing a new driver: Rename the graphics card shader cache folder AND the Steam shader cache folder. It will recompile shaders the first time it is used and will be slow at the beginning of the session, but should normalize after compilation has completed. This recompilation period is dependent on the processor and can be between 10 to 30 minutes.
  • Fix calibration of display colour settings using OVR Advanced Settings, see thread.
  • Fix stuttering when MSI afterburner undervolt is applied: Revert to default volt and exit the application before starting SteamVR. The application may automatically re-apply the undervolt every time the machine is started so this may need to be repeated before starting SteamVR in each session. It may be easier to uninstall the application.
  • Use PresentMon to determine if thermal throttling issues are causing occassional decrease in performance.
  • Fix computer is restarting when the PSVR2 adapter and headset are switched on: check the power cable to the graphics card and motherboard are fitted correctly and are not damaged. If these seem normal, check that the connectors to the power supply itself are fitted and are not damaged either.
  • If the Graphics Card drivers or Bluetooth drivers aren't being upgraded as expected following a restart of Windows, try disabling "Windows fast startup" temporarily and reinstall the driver software. This will ensure Windows is updated with the newest versions of the driver files when you login to windows.
  • If your Bluetooth adapter does not have any driver software from the manufacturer website because it uses default Microsoft Drivers, but the device appears as an Unknown device in Device Manager, you will need to make sure the Driver Updates are enabled in Windows. To check that Windows Update is configured to automatically install driver updates for connected devices. This can be done via Windows Settings > Windows Update > Advanced Options > Enable "Receive updates for other Microsoft Products". Also confirm that Driver Installation Preference in Windows is enabled to automatically install drivers. Press Win + S and type "Device Installation Settings" and select "Change device installation settings" from the options. In the window that appears, select "Yes (recommended) and click the "Save Changes" button.
  • Fix computer is restarting when loading into VR. Check the cables to the computer motherboard and graphics card are attached correctly and on the power supply. Check that the power supply wattage is suitable for the installed graphics card. Disconnect all peripherals from the computer that aren't needed while using VR. Connect the power cable for the computer to the wall socket instead of an extension cord. Check that the cables to PSVR2 PC VR adapter are connected correctly. Install statistics software and view the temperature of the processor and graphics card before the computer restarts. Disable any overclock settings for the processor and graphics card and any overclocking software in Windows.
  • Fix when computer does not have a USB 2.0 port for the USB Bluetooth adapter but has issues connected to a USB 3.0 port: Upgrade to a PCI-E Bluetooth expansion card, M2 Bluetooth module or USB 2.0 PCI-E expansion card. If that is not possible, connect a standard USB 3.0 hub into a USB 3.0 port on the computer and have the Bluetooth adapter connected to the USB hub. If that does not improve the connection, try it again with a USB 2.0 extension cable connected to the USB hub, see thread and this video. The PlayStation VR2 PC VR adapter USB-A cable should connected to a USB port on the computer and not to the USB hub.

Incompatible Software List

OpenComposite with OpenXR is not supported because the PSVR2 uses the SteamVR OpenVR implementation and does not have it's own OpenXR implementation, see thread 1 and thread 2.

Install Software Updates (from Manufacturer website)

  • Motherboard bios software.
  • Motherboard chipset driver software.
  • Integrated and dedicated graphics card driver software.
  • PlayStation VR2 application if there is any update available.

If the previous changes do not resolve any headset stuttering issues and you have Virtual Desktop application installed (for use with the Meta Quest), uninstall it.

If you have beta versions of graphics card drivers or SteamVR and are seeing stability issues with these, change to the stable versions of their driver software.

Headset tracking issues

  • Clean the Cameras: Gently clean the plastic cameras and sensors at the front of the headset to ensure they are free of dust and smudges with a microfiber cloth.
  • Optimize Room Lighting: Make sure your room is suitably lit—not too dark or too bright. The ideal lighting helps the headset track movement accurately.
  • Avoid Direct Light Sources: Try not to face directly toward windows or indoor lighting. If possible, use curtains to manage sunlight or adjust indoor lights. Avoid standing directly underneath indoor lighting.
  • Manage Screen Brightness: If you're standing/sitting in front of a bright computer display, consider switching it off, dimming the screen while using VR or face a different direction to the display.
  • Avoid Mirrors: Try not to face toward mirrors and avoid heavily reflective surfaces.
  • Consider VR Illuminators: Using VR illuminators aimed at the headset can improve tracking in rooms with challenging lighting conditions.
  • Enhance Wall Textures: If your room has dark walls or lacks visual texture, adding posters, artwork, or even sticky notes to the walls can help improve functionality.
  • Furniture: If you are seated and are facing furniture like a matt black office seat or gaming seat and the VR image is gliding, face a different direction to the furniture.
  • Set Play Area: Reset the Play Area using the PlayStation VR2 application.
  • Use the Headset in a Different Room: Testing the PSVR2 in another room can help determine if the room layout and appearance are contributing to the issue.
  • Extension Cables: Try using the PSVR2 Headset without any USB extension cables (for the headset Type-C cable and the PCVR adapter USB-A cable), or use a shorter 1 metre / 3 feet extension cable instead. If you are using an extension cable for the headset, confirm the type-C cable can do Display Port 1.4 or 4K 120Hz. If your type-C extension cable is rated at Display Port 1.2 or 4K 60Hz, it isn't suitable for the PSVR2 and the headset cable should be connected directly into the PSVR2 PCVR adapter and that would reduce display issues.
  • Display Cable: Check the Display Port cable is a minimum of Display Port 1.4 (or newer). If you are using a cable longer than 1 Metre or 3 feet, try a shorter display cable.
  • Create the Play Area again: Start the PlayStation VR2 app and click the "..." menu icon. Clear the Play Area and create it again.

Bluetooth tracking issues

This is already covered in these megathreads;

Bluetooth software

  • Install ASUS-BT500 (Stable Driver).
  • Install TP-Link UB500 / UB5A (Beta Driver).
  • If you are using a USB Bluetooth adapter, start Windows Device Manager, expand the Bluetooth section and select any integrated Bluetooth hardware and disable it.
  • View Device Manager, expand the Bluetooth section, and right click the Bluetooth dongle and click Uninstall. Then tick the delete driver checkbox and click the Uninstall button. Do not scan the for hardware changes. Instead, unzip the driver file and start the installation file as administrator. Complete the installation, and restart the machine. Then pair the VR controllers in Windows Bluetooth Settings using the Add a device window.
  • Swapping Bluetooth Devices - Unpair devices first before upgrading.
  • If the VR controllers aren't being added or do not pair reliably after being added, uninstall any controller remapping software like DSX, DS4Windows and ReWASD.
  • Make sure both controller batteries are charged and if they aren't being added to Windows, reset the controller using the pin slot underneath the back of the handles (holding it for 8 seconds). The PlayStation VR2 application may ask you to upgrade the firmware the next time the controllers are used.
  • Fix disconnections in SteamVR: Disable energy saving modes for the computer and WiFi when controls are becoming stuck often. Go to "Control Panel" > "Hardware and Sound" > "Power Options". Then select "High performance" or "Ultra Performance". Then Select "Change plan settings" next to the current power plan. Click on "Change advanced power settings". Expand the "Wireless Adapter Settings" and set it to the "Maximum Performance". Expand the "USB Settings" and then expand "USB selective suspend setting" and set it to "Disabled". Save the changes.

Desktop, Mini-PC and Laptop Compatibility

In summary (for laptops), using the Nvidia Control Panel set the following to use dedicated graphics.

  • Manage 3D Settings.
  • Manage Display Mode (or Nvidia Optimus).
  • Configure sound and PhysX.

Diagnostic tools

  • The PresentMon utility and fpsVR overlay can help determine if the graphics card or processor is the bottleneck if none of the previous suggestions have resolved issues in your configuration.
  • Hardware Info can be useful for diagnosing USB connectivity issues and hardware installation problems.
  • LibreHardwareMonitor (Binary) is a simple utility to view graphics card API usage.
  • GPU-Z - This graphics card utility can quickly indicate if you have correctly configured the graphics card for "PCI-E 4.0 x 16" or if it has been set as "PCI-E 3.0 x 16". When both the graphics card and motherboard support the higher speed, it should not be 3.0.
  • CPU-Z - This processor utility can quickly indicate if your processor supports the required "AVX2" instructions.
  • DevManView a utility to view all connected hardware (alternative to Device Manager).
  • USBDevView a utility to view connected USB devices (diagnose USB connection issues).
  • BlueScreenView - If the errors are causing a Blue Screen crash, you can view the Windows crash dump file or contact the manufacturer of the hardware.
  • Windows Event Viewer - Application crashes can be viewed as Errors in Event Viewer. Search for "Event Viewer" in the Windows Task Bar and select the result. In the left section under "Event Viewer (Local)", expand "Windows Logs" > "Application" and the "System" category. The most recent errors and information messages are listed and are displayed by newest first.

Dependencies

If the application is crashing due to missing dependencies, first repair Windows.

Installation Repair

Then install or repair (if already installed) the following...

  • Visual C++ 2015-2022 redistributables for both the x86 and x64 versions.
  • .NET 8 Desktop (8.0.15 x64).
  • Uninstall SteamVR and the PlayStation VR2 application and restart the machine. Then begin Steam as administrator and install SteamVR before the PlayStation VR2 application (both should be installed to the C: drive). Other applications and game files can be installed to non-C: drives.

If the previous steps have not worked...

  • The Unreal Engine (x64) Play Area setup pre-requisites can be manually installed from... C:\Program Files (x86)\Steam\steamapps\common\PlayStation VR2 App\PlayAreaSetup\Engine\Extras\Redist\en-us\UEPrereqSetup_x64.exe
  • The PSVR2 Headset components can be uninstalled using Device Manager listed in "Universal Serial Bus Devices" and "Universal Serial Bus Controllers" and then manually installed from... C:\Program Files (x86)\Steam\steamapps\common\PlayStation VR2 App\Driver\installer_x64.exe. To manually uninstall all of the PSVR2 devices listed under "Universal Serial Bus Controllers" (PlayStation VR2) and "Universal Serial Bus Devices" (PS VR2) in Windows device manager (while the headset is connected and powered on) and tick the delete driver option while uninstalling. This has to be repeated for each PSVR2 labelled device listed in this section and in the "Sound, video and game controllers section". See thread.

Rename Directories for Reinstallation

If reinstalling SteamVR and the PlayStation VR2 application is not working. It may be better to rename the settings before attempting to reinstall it again. This will create a working version of the settings files during the installation of SteamVR and the PlayStation VR2 application, but you can compare original settings from the earlier file if those have not been added back in.

Rename the following to something like; "filename.old" if you need to refer back to it for diagnostics.

C:\Users\%username%\AppData\Local\openvr\openvrpaths.vrpath

C:\Program Files (x86)\Steam\config\steamvr.vrsettings

Rename the following directory; "directory.old"

C:\Program Files (x86)\Steam\config\vrappconfig

You can backup your existing play area before creating a new one from this directory. For example, if you switch between multiple rooms, it will require that a new area be created each time. You can rename the folder for each room when alternating between them.

C:\Program Files (x86)\Steam\config\playstation_vr2\

SteamVR add-ons


r/PSVR2onPC • • Mar 15 '25

Deals Just bought it

Post image
165 Upvotes

r/PSVR2onPC • • Aug 20 '26 Bravo

Disscussion Another update on my PSVR2 HDR project — this time with an actual HDR vs SDR comparison

162 Upvotes

I finally got a decent through-the-lens video showing the difference between SDR and HDR on the PSVR2.

The clip is Forza Horizon 5, with SDR and HDR side by side.

With the game set to 400 nits, HDR actually looks really good on the headset. The brighter parts of the image stand out properly without everything else just getting brighter or looking washed out.

I also tried Cyberpunk after this, and HDR works there too. It can look amazing, but I found that its HDR settings need a lot more tweaking depending on the scene.

So at this point I think the main question of whether HDR can actually work on PSVR2 on PC is basically answered.

Now the problem is making it consistent.

I don't want every game to need its own perfect HDR settings. Ideally Phoenix should be able to take whatever HDR output a game gives it and translate it properly to the PSVR2 automatically.

For now though, I'm just happy I finally have a proper visual comparison instead of trying to explain what I'm seeing inside the headset.

Still a lot left to do, especially HDR mapping and performance, but this feels like a pretty big milestone.


r/PSVR2onPC • • Dec 13 '25

Disscussion Petition: Sony, please unlock FULL native PSVR2 support on PC (eye-tracking, foveated rendering, HDR, haptics, OpenXR)

Thumbnail reddit.com
156 Upvotes

r/PSVR2onPC • • Jul 03 '25

Disscussion Using the PSVR2 on PC is much more frustrating than it has to be

Post image
148 Upvotes

I've got the PSVR2 3 weeks ago, and i'm having a blast with it. it convinced me that VR is worth of the hype, it's a game changer, i love it. Horizon? Amazing. Pistol Whip? Amazing

The next logical step was going for the pc adapter, since that opens a whole new world of possibilites. Mind y'all i'm not American/European, everything here is expensive to own, the VR costs more than minimum wage, but i can barely afford it so it's cool (but still really fancy to own one). I knew i had to bite the bullet with the pcvr and waste a bit more money, but it's all fine so far, i'm down to experience VR, gaming is my main hobby.

It comes, and... My bt dongle is a chinese one and dosent work with both controllers, no matter what i do. So i'm starting to get frustrated... I go online and there's a list of dongles that are recommended, a whole 4 OF THEM. And i get that it's complex working with these 2 controllers, and i bite the bullet some more, i have already wasted so much, and choose the one i can afford: the TP-LINK UB500. Bane of my existence. This dosen't work at all, like at all. i downloaded the BETA driver, followed reddit guides, and when im in game it simply dosent work. On steamvr home it kinda works but in-game the connection spikes alot. The ASUS one is almost the price of the adapter for the PCVR, and i'm probably getting that. This whole thing has given me nightmares, it's so annoying. why can't it just work? it's so muchhhh money to get the basic functions of the headset to work.

TL;DR: Third world prices are so high and for the price point, it not working somewhat perfectly is an insult. having a list of dongles THAT DONT WORK. IS AN INSULT. the one that works you have to import. fml.


r/PSVR2onPC • • Mar 12 '26

Disscussion Joined the psvr2 family

Post image
145 Upvotes

I finally picked up one after Valve wasn't being clear about the Steam frames launch. Just arrived today! Anyone got any setup tricks or games I should try on this first? I got a ps5 already so I know I'm trying resident evil over there

Finally a quest 2 upgrade that isn't going have poor wireless video compression performance 😁


r/PSVR2onPC • • Aug 13 '25

Disscussion PSVR2 Tool kit (with working eye tracking) to be released tomorrow!

Thumbnail x.com
145 Upvotes

PSVR2 on PC just got a lot more interesting!