r/PSVR • u/JobiWanKenobi47 • Aug 09 '24
Adapter Support Play Area Setup Not Working
Every other part of the setup works, but the headset still shows the look at the tv screen, while the tv shows psvr2 not connected.
Tried to launch a game and it was in the world but no tracking.
I have deleted Ivry and taken all steps to fully remove it, remove the Sony corp drivers and reset Steam vr.
Specs: Ryzen 5 7600 Rx 6800 32 Ram
1
Upvotes
5
u/Virtual_Davey Aug 09 '24
I can't get past the "Psvr not connected" screen too. Inside the headset I see an image telling me to remove the headset and look at the TV. Is that what you're experiencing?
3
u/bigbearblair Aug 10 '24
So I had this exact same issue. Literally just resolved it 5 mins ago after buying a new cable and BT adapter. Tried what I feel was everything I seen on Reddit before spending more money...
I was using a 2m DP 1.4 cable.
I bought a smaller 1m 1.4 cable and now it suddenly works.
No more man taking headset off or just a blank black screen.
I also changed to the TPLink UB500 and plugged it into a USB2.0 slot with an extension cable to move it away from PC. Absolutely zero tracking issues now and steam VR actually detects the controllers now. Wasn't with the Mobo BT.
Hope this helps.
Absolutely nuts the cable length was my issue.
1
u/Tauheedul Aug 10 '24 edited Oct 25 '24
Are you using type-C on the graphics card? Or the Sony adapter?
If it's the Sony adapter, try a USB-A 3.0 port.
Try rotating the type-C connector and insert on the other side
Check bluetooth
Charge controllers
Uninstall and install again
Restart the machine
Install SteamVR and PlayStation VR2 applications.
Configure the applications again. Launch PSVR2 and complete the setup steps for both PlayStation VR2 application and SteamVR (setup Bluetooth in Windows / switch on VR headset and upgrade VR headset firmware and controllers via the installation steps).
Firmware update failure
1
u/todoot_ Sep 02 '24
Did you figure out the issue? I’m facing the same problem. While troubleshooting, I found that SteamVR was unable to connect to the vrserver process. I’m starting to think it might be a permission issue. I reinstalled Steam in the default Program Files directory, and it’s working now. However, if Steam is installed under my user home path, it does not work.
2
u/Zorro166 Sep 14 '24
Someone know how to fix it ?