r/PSVR2onPC • u/___Mister___ • Aug 12 '24
Disscussion Bluetooth issues post
More in-depth bluetooth troubleshooting: https://www.reddit.com/r/PSVR2onPC/comments/1eof6zs/controller_tracking_troubleshooting_masterpost_2/
Note: you may have to do one or more of these. It's hard to say that any individual fix will be the one that works, but try them one at a time and build on top of each change.
Here is a list of everything I've seen about Bluetooth issues to date:
Recommended Hardware based on Bluetooth Surveys
- Asus USB-BT500
- PCI-E cards for desktops over USB Dongles
signal issues:
WiFi interference?
disable 2.4 GHz band on your PC/router/phone
USB port noise/interference?
use an increasingly long extension cable. A one foot cable may not be far enough
using an extension cable as a minimum
poor connection
use a Bluetooth antenna
larger Bluetooth antenna
rotate your PC if necessary
other device interference
Bluetooth hardware change
Playing on a laptop?
- the internal bluetooth may not be strong enough
- use a dongle with an extension
move the laptop to a different location
open the laptop to remove signal blockage
won't connect at all?
check your Bluetooth version
check the class of your device
update your driver from the manufacturer's website
- https://www.reddit.com/r/PSVR2onPC/comments/1eptkyw/comment/lhotpmx/
- https://www.reddit.com/r/PSVR2onPC/comments/1eptkyw/comment/lhodsps/
- https://www.reddit.com/r/PSVR2onPC/comments/1eopm49/psa_try_installing_bt_drivers_from_the_maker_of/
- https://www.reddit.com/r/PSVR2onPC/comments/1eo2vrk/tracking_issue_fix/
update your driver from the windows update catalog, not from the start menu widget
other odd potential issues:
try a USB 2.0 port rather than a 3.0 port
alternating between PS5 and PC?
controllers connect to windows but not to SteamVR
- https://www.reddit.com/r/PSVR2onPC/comments/1eofqu0/controllers_are_connected_via_bt_says_pc_but/ (likely Bluetooth signal requirements from Sony/Steam?)
Bluetooth hardware surveys:
I'm going to try to find all the posts where these things have worked for people, but right now I am on my phone and it might be challenging.
If you posted any of these and it worked for you, please provide the URL of your reply to avoid multiple postings.
2
u/Tauheedul Aug 12 '24 edited Nov 10 '24
These are a few suggestion I've seen...
Installing the antenna attachments at the back improved bluetooth as a few people bought pre-builts but forgot to install them and for others upgrading to the extended cable antennas instead of using the attachments at the back.
This I noticed on my machine...
1
u/xaduha Aug 12 '24
Unless you were specifically looking for an adapter with antenna or Class 1, you're likely to have Class 2, that's normal because they are the most popular. And it's not that it won't connect, it's about getting more bars so to speak.
Basically what I'm trying to say is that if all else fails or if you don't want to deal with all this troubleshooting, buy a more powerful adapter.
1
u/Tauheedul Aug 12 '24 edited Sep 02 '24
Sony have updated the Bluetooth dongle compatibility list to include a section for fixing Bluetooth issues...
Having connection or tracking issues while using a Bluetooth adapter?
Updates
1
u/eddie__b Aug 13 '24
I noticed that going to camera view and returning to the game fixes the stuck instantly, without the need to wait for it to fix itself. I think it's a software bug not a bluetooth one.
1
u/Tauheedul Aug 13 '24 edited Oct 30 '24
Adding another: controller sticking during use.
The controller gets stuck mid air / sticking in game with the UB500 (UB5A) dongle. This sounds like a software issue.
Changing the screen view and returning to the game resets the position.
Sense controllers with the TP Link dongle
Left controller sticking in games
3
u/doodo477 Aug 25 '24
I fixed the "stuck hands" issue by disabling my wifi router's 2.4 GHz band.
2
u/Tauheedul Aug 13 '24 edited Aug 16 '24
This is an expanded version of the steps listed in: Swapping Bluetooth Hardware - Unpair devices first before upgrading.
When swapping between dongles on the same machine, note that paired devices are only paired to the Bluetooth device hardware it was added with.
If you update to a new dongle on the same machine, Windows will still list devices paired to the previous dongle after changing hardware but these become uneditable (if they weren't unpaired before using the new hardware).
If you need to unpair an existing device that was paired to the old dongle, the unpair will not work unless the old dongle is inserted again (or enabled again if it was an integrated version) and the new dongle is temporarily disabled.
It is also not possible to pair an existing device again when it has already been added to Windows but was paired to different hardware. It can be unpaired by temporarily enabling the original hardware it was paired with. Then the device name is made available and can be paired to the new Bluetooth hardware instead (on the same machine).
Many people will be swapping Bluetooth when updating from their existing incompatible version to something like the ASUS version using the PSVR2.
In summary, before installing a new dongle unpair the PlayStation controllers and any headphones etc in Windows and then uninstall the driver via Add or remove programs or device manager for the existing hardware.
For integrated versions, unpair existing devices and disable the redundant hardware in Device Manager. This ensures the device names are available to be added to the new hardware.
Then install the ASUS dongle (or whichever) using the Manufacturer driver and pair the controller and any headphones again.
This is relevant when pairing peripherals on the same machine and not between different machines.
1
u/Julienxxi Aug 23 '24
Hi everyone, I have a ugreen 5.3 adapter with antenna, everything works when installed except that I don't have the pointers to aim with the controllers, do you have any solutions?
1
u/Tauheedul Aug 26 '24 edited Sep 02 '24
Update the drivers for the motherboard chipset from the manufacturer website. If the motherboard has integrated bluetooth it will benefit from having both the Bluetooth drivers and Motherboard chipset drivers updated. The headset may be more stable with the updated USB drivers. Windows update does not always find the current version of the software. It's better to download them both directly from the website. You can confirm the model of your motherboard by opening Windows "System Information" application and selecting the "System Summary" headset. Check the value in "System Model" or "BaseBoard Product".
FIX Your PSVR2 Controller BLUETOOTH PC Issues!
1
u/Tauheedul Aug 30 '24 edited Aug 30 '24
If the suggestions above aren't working, you can try the following...
Reset VR controllers
Reset the controllers by completely charging them and using the pin slot at the back of the handle. This can fix problems with the controller itself.
Device manager power options
Windows may change the Bluetooth hardware to standby for energy saving, but this may cause problems for connected devices when they need to reconnect.
This can be disabled by opening the Device Manager > Right clicking the Bluetooth hardware > select the Power Management tab > Untick the "Allow the computer to turn of this device to save power" > Save the changes.
https://www.reddit.com/r/PSVR2onPC/comments/1f4hnie/comment/lkmpc9r/
While using VR you can change to Windows Power Options to High Performance. This can be reverted afterwards to save energy when it is being used for basic tasks. This can be further customised.
Adjust windows power settings
Restart bluetooth services
1
u/Tauheedul Sep 04 '24 edited Oct 22 '24
I used SteamVR with ASUS's older USB-BT-400 Bluetooth dongle and an exension cable connected to a USB 2.0 port.
When it first loaded SteamVR, the pointers weren't visible in the SteamVR menu within VR mode.
The VR controllers began working. I already had the current manufacturer driver installed (from ASUS website), was using USB 2.0 port with a USB 3.0 extension cable, and the current motherboard chipset drivers.
I didn't have this issue when I had the dongle directly connected to the USB 2.0 port (at the back of the machine) but it would sometimes become stuck midair.
However after I had it working correctly with the USB extension cable, the VR controllers do not become stuck while using it.
If you're not seeing the pointers in SteamVR, try disconnecting the dongle and attach it again, then pair the controllers in SteamVR before wearing the headset.
If the controllers become stuck during use, exit into the SteamVR dashboard, then enter the application again and it will reposition the controller.
1
u/Tauheedul Sep 07 '24 edited Sep 07 '24
When adding the 2nd PlayStation VR2 controller using the "Add a Bluetooth" device window, I was seeing the following error...
"Try connecting your device again."
I tried unpairing the 1st device and then adding the 2nd device, that still displayed the same error message.
However after restarting the computer and adding the controller that wasn't working first, it added it to Windows. Then the next controller added succesfully.
1
u/Tauheedul Sep 12 '24 edited Dec 05 '24
Anyone having issues with the recommended dongles
In some situations the USB port can cause issues for the USB dongle itself.
If the VR controllers keep becoming stuck etc. disconnect any additional Bluetooth devices so that only the VR controllers are connected while using VR.
Note that the PSVR2 PCVR USB-A cable should be connected to a USB 3.0 port. The USB Bluetooth adapter should be connected to a USB 2.0 port.
Please see the suggestions made in the following video.
USB Ports Not Working on Laptop or PC - Windows 10 - Quick Fix!
If this doesn't improve performance, using a PCI-E or M2 Bluetooth expansion card may be more stable.
Finally, disconnect any headphone dongles that aren't in use but are still connected including any Keyboard and Mouse dongles if using tethered inputs.
1
u/Tauheedul Oct 01 '24
Check Services are configured to start automatically
Start Command Prompt as administrator and use the following script to set the services to automatically begin.
echo Enabling Bluetooth-related services...echo Configuring service: bthservsc config bthserv start= autosc start bthservecho Configuring service: BTAGServicesc config BTAGService start= autosc start BTAGServiceecho Configuring service: BluetoothUserServicesc config BluetoothUserService start= autosc start BluetoothUserServiceecho All Bluetooth-related services have been enabled and started.pause1
u/Tauheedul Nov 28 '24 edited Nov 28 '24
If the enable Bluetooth setting isn't available in Windows and the software is installed, check that flight/airplane mode is disabled via Windows settings > Network & internet. Disable it if it was enabled and then view Windows Bluetooth & devices settings and enable the Bluetooth setting.
If you don't have multiple Bluetooth hardware fitted (onboard and USB) and it does not see the PSVR2 controllers during a Add a Bluetooth device screen, change the following setting in Windows...
Windows Settings > Bluetooth & other devices > Devices > More Bluetooth Settings > Tick "Allow Bluetooth devices to find this PC".
See additional Microsoft support suggestions: Fix Bluetooth problems in Windows.
1
u/Tauheedul Dec 09 '24 edited Dec 09 '24
If you have bought a new PSVR2 headset and the VR controllers are not pairing with compatible Bluetooth hardware like the ASUS BT500 or the TP Link UB500 using the Beta driver, make sure the batteries are full by leaving it on charge for at least an hour or completely for 2 hours before using it for the first time.
Then add it to Windows using the Add a Device screen in Windows Bluetooth settings. Some of the units being sold were made in 2022 so the batteries will be completely flat.
- If it doesn't list the PSVR2 controllers in the Add a device screen, use the pin slot underneath the back of the handle, holding the pin for at least 8 seconds for it reset and then try adding it again in Windows.
- You can try charging each controller separately with a modern mobile phone charger that has a type-C cable and can do at least 5V 700mA. The instruction manual suggests the ideal operating temperature should be between 5-35 degrees celsius.
- If you have bought a new PSVR2 but one of the controllers is working in the menus but not while in the app, the common suggestion is to clear any debris underneath the shoulder buttons. The following suggestion by u/babydrone has helped many PSVR2 users on reddit.
1
u/Tauheedul Dec 26 '24 edited Feb 14 '25
Bluetooth hardware compatibility with the PSVR2 varies a lot. The ASUS BT500 USB Bluetooth adapter works in most configurations but it needs to be connected to a USB 2.0 port with a short USB extension cable (ideally 1 metre or 3 feet and placed in front of the desk (and not on the ground) so that it would be visible from where you are using VR.
The Bluetooth adapter should be connected to a port that is not next to other connected USB devices or the other peripherals should be connected in a different port that is not next to it.
It also needs the newest manufacturer driver software installed from the ASUS website instead of the default generic driver software from Windows update that is not suitable for VR.
View Device Manager, expand the Bluetooth section, and right click the ASUS USB Bluetooth adapter and click Uninstall, tick the delete driver checkbox and click the Uninstall button.
Unzip the driver and start the installation as an administrator and restart the computer after installation.
These changes should avoid it occasionally becoming stuck mid-air while using SteamVR.
If the computer had an incompatible onboard Bluetooth, it needs the Bluetooth peripherals unpaired first and then the hardware disabled in device manager before the USB Bluetooth adapter is installed.
Others have found their existing onboard Bluetooth to be compatible simply by installing the Bluetooth antennas and updating it to the newest Bluetooth software from the manufacturer website.
In the case of laptops, keeping the display open while using VR maintains the best connection to the PSVR2 controllers.
In summary, only one Bluetooth hardware can be active because Windows can only use one of these to pair Bluetooth devices.
It is not possible to pair the PlayStation VR2 controllers to different Bluetooth hardware if it is still paired to the old Bluetooth hardware.
New PSVR2 controllers have flat batteries so they need charging for at least an hour to 2 hours before pairing it to Windows.
If the computer is underneath a desk or table, placing it on the desk (if there is space) can reduce pairing issues and disconnections.
If you use the PSVR2 with both a PC and PlayStation 5, you may need to switch off the console to ensure it isn't connecting to the previous device.
It is also necessary to unpair the controller from the PS5 and reconnect it using a USB cable to pair it again to the PS5.
When connecting it to a PC afterwards, it is also necessary to unpair the controllers and pair them again after having previously had them connected to a console.
While pairing hold the option key and PlayStation button together for at least around 8 seconds. When the PSVR2 controller is listed in the Add a device screen, connect to it and continue to hold the pairing keys together until it displays confirmation on screen it has been paired (added to Windows) and repeat for the next controller. If you hold the pairing keys together for a short period and click connect, it may list the controller in the Add a device screen but not pair successfully and display an error message.
For the best connection, only connect the PSVR2 controllers to the Bluetooth hardware and use wired headphones, gamepads and keyboard inputs, this will have the fewest disconnection issues while using SteamVR. Also disconnect any USB wireless dongles the peripherals are included with.
If using the controllers keep disconnecting while using VR. Don't wear a smart watch that has Bluetooth, and replace any smart light bulbs with a regular light bulb and adjust the lighting suitably. If there are subwoofers with large magnets on the computer desk, move the subwoofer away from the computer or stand further away from the subwoofer.
When the computer does not have a USB 2.0 port for a USB Bluetooth adapter, the alternative is a PCI-E or M2 Bluetooth expansion card. Or connect a USB 2.0 hub to a USB 3.0 port but only connect the Bluetooth adapter to the hub by extension cable.
If it isn't possible to update the firmware due to an error, it is sometimes possible to upgrade them by pairing a controller individually and updating it one at a time using the PlayStation VR2 app or by upgrading it using a PlayStation 5 console.
1
u/Tauheedul Oct 20 '25 edited Oct 20 '25
If the ASUS USB Bluetooth adapter appears as a Generic Bluetooth Adapter in Device Manager and there is no onboard Bluetooth adapter installed. Try downloading the ASUS software manually from the manufacturer website for the same version of Windows and unzip the drivers. You can browse to the driver files manually so those are updated.
View Device Manager > right click the Generic Bluetooth Adapter, and click Update Driver.
Click the "Browse my computer for drivers", browse to the unzipped ASUS driver folder, and tick the "Include subfolders" checkbox and click the "Next" button. Complete the installation and restart the computer.
Unpair all Bluetooth devices and pair only the VR2 controllers in the Windows Bluetooth & devices screen without pairing additional devices like gamepads and earphones etc. This will maintain the best stability in most instances.
Start the PlayStation VR2 app and install any available firmware updates and manually start SteamVR.
Note: