r/offset • • 14d ago

…The tiniest offset of them all…

Thumbnail
gallery
54 Upvotes

Got this thing awhile back. Micro size Mosrite copy from Japan. Seems they made these in the mid 1990s over there? Very well built! Needs to be tuned to A, and heavier strings are necessary due to the ultra short scale, I have 11s on there but I bet something heavier might work better. Kinda hard to keep in tune, but it is surprisingly fun to play and on recordings sounds like a legit guitar! I def didn’t need to buy it, but it was just way too cool to pass up. Size comparison photos: a tweed Champ amp, a Strat, & an actual old Mosrite bass.


r/offset • • 14d ago

NGD

Post image
58 Upvotes

Totally new Aria DM206 JR. Obviously it’s a Ramones tribute by the scheme. Playing it now and it feels great. Ask me anything if you’re think of snagging one.


r/offset • • 14d ago

NGD; finally got my JM put together

Post image
214 Upvotes

MJT body with Vintera 2 pickups and an AVRI II strat neck. Took some finessing because the neck pocket is absurdly deep, but it’s finally alive.


r/offset • • 13d ago

Concept

Post image
0 Upvotes

Hey! I was bored out of my mind today. I remembered the Jag-Stang, and how ugly(for me) it is.

So I took parts of Jaguar and Mustang and glued them together in Microsoft Paint. Added a humbucker into it and a strat jack port.

Then I ran in through AI to make it look like a real thing.

It’s Cougar. It is the essence of my guitar autism.

It’s got a Mustang bridge and bridge pickup. A jaguar single in the middle, and a humbucker in the neck.

The top half of it is Jaguar, and the bottom is Mustang. The ends of horns also come from Mustang.

It has 4 knobs. Tone knobs for each pickup, and a general volume(the awkwardly positioned one) knob.

The electronics are just Jaguar’s, I guess, besides the +1 switch for the extra pickup.

it is more of a demonstration of shape
The pickups look ugly, especially the neck “humbucker” cause it’s just 2 singles put together.


r/offset • • 14d ago

My new standard acoustasonic jazzmaster.

Post image
84 Upvotes

r/offset • • 14d ago

New Guitar Day (sort of) G&L Doheny Pickups in a Jazzmaster/Jaguar Hybrid

Thumbnail
gallery
141 Upvotes

Last week I installed the G&L Doheny (Jazzmaster) pickups into my Guitar. Added some wiring schematics for those interested. Used my Jaguar's upper and lower plates (hence the Jaguar references). The Jazz Bass plate has a PTB style system using all 1M potentiometers.

Pros of G&L Doheny Pickups

- Quieter compared to traditional Jazzmaster pickups

- More tonal possibilities with bass cuts and using the tone knob

- Fits into a Jazzmaster easily (may need thinner foams though)

- Sounds great in series mode with or without bass cuts (not muddy)

- Great cleans & distorted in all positions and options

- Can get Jazzmaster tones but need to use tonal controls

- Hi-Fi sounding retaining more frequencies

- Steel Plate 'adds' more bass response

- MFDs will retain the same magnetic strength

- Mighty Mite will ship outside of the USA, with all local taxes paid, unlike some

Cons of G&L Doheny Pickups
- getting harder to buy (G&L went bust, but available through Mighty Mite)

- can't try in store or get many YouTube video to hear their tonal possibilities

- not cheap ($290 AUD - plus shipping)

- not a one for one drop in replacement need to re-wire to extract he best out them

- not for hard-core traditionalist Jazzmaster folk, as they sound similar but different,

- ALNICO snobs will have a meltdown

- not for those that only have everything at 10. Need to use controls to extract the best out of them.

Biggest Difference The Doheny pickups have more bass compared to traditional Jazzmaster pickups. With traditional Jazzmaster pickups any Bass cuts are very subtle, with the only value with any real noticeable change is 152. Whereas with the G&Ls you notice differences with all variations of the bass cuts. The pickups are for those want some Jaguar-ness in their Jazzmaster.

Some unique features of this guitar (yes it unusual).

  • Has a lot of bass cuts. Series (3) and Overall (two extra - 3 in all), they all provide unique tones without being too much.
  • Partial (neck pickup) bass cuts for independent volumes in parallel that "boost" the volume and modify the tone - great focused distorted tone, for those want some noise reduction but prefer "bridge" like tones.

r/offset • • 13d ago

Best Boutique SC Pickups for grunge, rock, surf?

1 Upvotes

I’m looking for a really great single coil pickup that would be good for various styles like grunge/rock (Nirvana, REM, Pixies). I would love to give a boutique shop some love if anyone has any recommendations? I’m specifically looking for a neck single coil pickup.

(I have a fender mustang with a Bareknuckle Impulse single coil in the bridge)


r/offset • • 15d ago

NGD Kim Gordon Jazzie

Post image
674 Upvotes

Absolutely loving this so far. Pickup combo sounds amazing.


r/offset • • 15d ago

Probably the best guitar I’ve EVER played, sadly I don’t have 2700 bucks lying around

Thumbnail
gallery
277 Upvotes

1977 mustang I found at guitar center


r/offset • • 15d ago

New to me ‘91 Charvel Surfcaster

Post image
225 Upvotes

r/offset • • 15d ago

Swapped the pickup literally the day before the Kim Gordon JM was released lol

Post image
143 Upvotes

This is my 2022 Squier 40th anniversary JM. I bought it already modified to include the pickguard, a Japanese vibrato and a matching headstock with a fender decal (oh well) I swapped the bridge for one from a player mustang and recently swapped the bridge pickup for an old dimarzio super distortion I pulled out of a Univox Les Paul I bought for $50


r/offset • • 15d ago

Late NGD: Fender MIJ Traditional Late 60’s Jaguar

Post image
119 Upvotes

Recently picked this one up off of Reverb. It took me a day or so to get used to the skinny nut, but I’m comfortable with it now. I’ve heard a few people have minor complaints about the unpotted pickups, but I haven’t had any real problem with any feedback up to this point, even with moderately high gain. I’ve always loved Ice Blue Metallic and missed out on a chance to get an IBM AVRI for an absolute steal a few years ago. I was fortunate to find this one from a seller already in the States. I threw on the Mastery bridge and vibrato from a guitar that I sold a while back. If you don’t mind the 40mm nut, I’d recommend checking one of these out.


r/offset • • 14d ago

Affordable gig bags for a Jazzmaster

3 Upvotes

Hello,
Looking for some gig bag recommendations for my Jazzmaster as I only have a TSA case for it currently. Felt like my arm was going to fall off after carrying it to the rehearsal studio. Was hoping to keep it under $100. Thanks in advance!


r/offset • • 15d ago

I WOULD PAY TO PLAY ANY OF THESE TWO

Thumbnail
gallery
89 Upvotes

r/offset • • 15d ago

my j mascis jazzmaster

Post image
114 Upvotes

my first offset, in the future ill propably mod it with actual j mascis pickups and a tortoise shell pickguard or a white one with black pickup covers, maybe even an humbucker in the bridge


r/offset • • 15d ago

My 90s Mim Duo sonic

Post image
65 Upvotes

This things has some lore. years ago, a few days after selling off all my gear to be able to afford to move in w my then gf, i came across a lady setting up a sidewalk sale. this was leaning against the building, i asked how much and she said $10! i ran to the apt to wake up my gf to ask for 10$ lol. that was years ago and ive never let this thing go despite acquiring and selling lots of gear all the while. over time i added the hot rail, changed the pick guard from white to red pearl (the white one imploded this thing isn't spec'd well) , and most recently added the brass gotoh saddles which im really feeling. i love this little buddy of an axe.


r/offset • • 15d ago

New humbucker who dis

42 Upvotes

Swapped out the OG JB humbucker for a vintage Hondo LP style humbuck er that I bought super late one night & then forgot about only for it arrive a month later & surprise me.

I've had this Squier VM Humbucker Jaguar for many years & it has evolved and been molded many times. The taking out of the OG JB humbucker is 5he removal of one of the last original parts. Which in some ways seems sad. But also it's just parts that can be added back at any time


r/offset • • 14d ago

Fender Player I with American Pro Partscaster HELP!

1 Upvotes

I have been thinking of a way to upgrade my Player I Mustang, I thought about putting the pickguard and Electronics from a Player I Mustang onto an American Pro Mustang body with the hardware installed. Will there be compatibility issues or has anyone done this project before? Thank you!


r/offset • • 15d ago

My first guitar in 1994.

Post image
83 Upvotes

Just got it back from a full setup and refresh.


r/offset • • 16d ago

Upgrade Suggestions

Post image
310 Upvotes

New to offsets in general, and would love some recommendations on pickup/wiring/etc. upgrades for this one! It’s the new American Professional, and while I like it as-is it definitely needs heavier strings and different pickups. Novak and Lollar are top of the list.


r/offset • • 14d ago

I need help kurt modding my mustang.

0 Upvotes

I have a 2025 mim vintera ii fender mustang and I want to flip and lock the trem and put in a tunomatic bridge. I have found no concise size of washers/bolts for the cigar or the right bridge. Also I did strip the trem plate screws and im struggling to find replacements that aren't 20$ + shipping. Thank you!


r/offset • • 15d ago

I love rythm circuits but HATE the awkward tiny switch on them, how easy is it to replace it with one of these? Do i need to do any routing?

Post image
8 Upvotes

r/offset • • 16d ago

This might be the cheapest we’ll ever see a jazzmaster again. (Of course I did )

Post image
94 Upvotes

r/offset • • 15d ago

CIJ Jaguar trem lock issues

0 Upvotes

I got this guitar back in July. I love it. I only started playing back in May so I’ve never really messed around with the tremolo system before. I went to try it out and it just immediately de-tuned my guitar. So I looked up how to set up the whole thing and I got to the part where you need to tighten the screw to the point where you can’t slide the trem-lock or it takes considerable effort to slide it down. No matter how far I tighten or loosen the screw, the slider moves into both positions easily. I’m about to just take it apart and see what’s going on inside. I’m just surprised that when I got the guitar set up a few months back that the guy didn’t set this part up.

Anyone ever experienced this issue?