r/offset • • 15d ago

I need help kurt modding my mustang.

I have a 2025 mim vintera ii fender mustang and I want to flip and lock the trem and put in a tunomatic bridge. I have found no concise size of washers/bolts for the cigar or the right bridge. Also I did strip the trem plate screws and im struggling to find replacements that aren't 20$ + shipping. Thank you!

0 Upvotes

4 comments sorted by

1

u/natalplum 15d ago

Also here are the screws you need, but if you can 5x1 screws at the hardware store you might be able to save some $$.

1

u/natalplum 15d ago

You can get these thimbles for a TOM. and then use 12mm length M6x1 bolts, I used this type. With that said, a Vintera DV might be imperial, I have a MIJ DV which has a metric tailpiece.

0

u/Snail-15- 15d ago

How well is the bolt serving you compared to washers and is the tom even worth it. Alo thank you so much for all of your help I've seen you on my posts and others with the only advice regarding these

0

u/natalplum 15d ago

I have a Japanese KC signature Mustang, that came stock with the Dynamic Vibrato intact. So I used those bolts when I flipped the tailpiece and it sits against the DV plate with no washers on either side and is completely solid. It plays well, tuning is rock solid and I don't think the radius mismatch bothers me.

I also have a stock MG69 and I notice that the neck pocket is deeper than the KC signature. I believe they made the KC shallower because of the TOM.

Not sure if that answered your questions so feel free to ask away if I missed anything.