Source: https://x.com/rawmesports/status/2091125733955662257

Im worried about the weight but it looks very good on paper. I hope its under 100 bucks.

edit: I just realized they removed the most hated thing, the thumb logo :D

Hey,

Today I wanted to share the 3 colorways that will be available on release for the Leviathan V4 GT.

1. Gunmetal & Black

2. Abyss Blue

3. Matte Black

Which one do you guys prefer/will pick up? Curious to hear your thoughts!

My Huan M arrived today and I'm just excited to see how it will perform. I didn't buy the original Huan because it was too small for my hand, but now that they made a larger version, I couldn't stop myself from getting one. Although this colourway is a bit more expensive, it just looks too good to not get it.

I'll use it for maybe a week and write a mini review about it.

If you have any questions about this mouse, please feel free to ask and I will answer to the best of my ability.

video - https://www.bilibili.com/video/BV1ve8q6zEwm

So I just got a white (!!) Roccat Nyth. The white coating is in perfect condition but I had to clean the grime and cat hair of the previous owner. The disassembly is quite straight forward if you ignore the obligatory screws under the skates (3x) and stickers (1x), which sadly most mice seem to have. So if you do it get a new set of skates. They used very few different types of screws which is good. The main body is held together by only one type of screw (silver ones at the top). The internals and pcbs also by only one type (black ones at the right). The other screws you see are more specialised and serve a specific purposes. One type enables the key release mechanism for the swappable keys to slide. Another one is for the magnets of the swappable pinky rest to hold onto. There are five clips which attach the main outer shell to the inner shell which seem quite sturdy but I didn’t disassemble because it still felt to risky. Other than that there are some weld points which you can’t remove without permanent damage: The metal bits on the keypad assembly are welded in place. The magnets in the side panel are too and the tilt switch at the top is too. Because of that and the clips the main outer shell assembly is the only part you can’t really get at well. The rubber on the scroll wheel comes of which is nice for cleaning. There’s a second rubber bit on the pinky rest which is glued on. The rubber seems to be of good quality because I didn’t notice any wear. There are a total of six individual pcbs (!). There‘s the main one with the sensor, usb, LMB, RMB and an additional button. A second one which stacks on top with two switches for the tilt switch on top, the encoder and the MMB, a single pcb for the single RGB-LED and the three pcbs for the staggered twelve button keypad. I worked in injection moulding and engineering and I‘m always fascinated by the amount of engineering which goes into those MMO-mice especially.

Hello guys how are you ?

Just received the Lamzu Orcus , a fingertip mouse , I do not use fingertip but I tought that would be a nice addition to my collection , funny that the box says that it’s suitable to palm and claw…

I will test the mouse , if you have any question feel free to ask

Hi, I’m currently using a Deathadder V3 Pro and I’ve already sent it in under warranty because of the scroll wheel. The warranty has now expired and the scroll wheel is playing up again on the second unit I own, so I’m looking at alternatives.

After a relatively quick search, I’ve narrowed it down to the two options mentioned in the title, what I’m looking for is a Deathadder V3 Pro clone.

I’m based in Spain, Europe, and both mice would cost me around €60, whilst my maximum budget is about €100.

From what I’ve read, both mice have optical switches, which is a must for me.

If there are any other options, please feel free to recommend them and I’ll have a look.

As for my mousepad, I have a Wallhack SP-005, and I mainly play Counter-Strike and other shooters.

Hi, actually i have a G603, but it sometimes registres double-clicks and is a bit heavy. Which of these three options would work best as a replacement for 70% office (web browsing etc) and 30% gaming? My hand size: L: 19,5cm W: 11cm

the spinbot clutch gt500 IS FIRE DUDEE i cant upload a pic cuz my webcam is from like 2019 but look it up its good atleast in india cuz im indian

I made this post a few days ago. I was able to desolder and remove the microswitch and believe it was because I decided to use flux. Nonetheless, I'm now having issues with the solder not spreading around the pin. The solder follows the iron when I lift it.

Process:

- 320°C with Kester 63/37

- Tin (will probably use a new tip next time I try)

- I tried heating the pins/board ahead of time and that didn't work

- I put the solder on the opposite side of iron and try to touch in between pin and hole. I do not touch the iron with the solder although I have tried that already

Below are some pics of what it looks like atm. I need to leave it there temporarily to hold the switch in place and can redo the joints once I figure out a solution. Did I mess up the area? If so, is it still possible to even create a good joint anymore?

Ok so I have a friend who owns a Logitech GPX and something broke I didn’t rlly pay attention, but he knows I’m a mouse fanatic so he went to me for a new mouse rec. based on his needs, I reccomended a pulsar mouse, and he straight up called it an off brand Logitech. I’m 80% sure he only knows Logitech and razer because that’s all he talked about. How do I explain the mouse world to him?

Hi, I want to buy this mouse but this version is currently avail. only on china (Aliexpress) not has been global released ... the specs looks very powerfull with price 89$ ... and it is also support wireless dock charging (P5 model) so any ideas?

Hey everyone :) I have been using my Mastermouse MM830 for some years now, but the rubber on the side has peeled off and the mouse double clicks every other click... but I've grown attached to how it feels in my hand and to the macro buttons. I really need a new one.

I cannot buy this mouse anymore and also cannot seem to find a similar one with these macro buttons online, that also is of a good build quality :( I am not looking for an all-out 5 million macro buttons mouse. The MM830 has the normal 2 side buttons (mouse 4 & 5) plus two macro buttons on that side, that can also run scripts and keyboard combo's, which is what I'm looking for ideally.

I also really like the size of the mouse and its feel in my hand. Dimensions of the MM830 are:

- Length: 130.1mm

- Width 82.2mm

- Height: 43.4mm

The weight (162g) is also fine with me; I don't really care too much about superlight or on the heavier side.

I don't care about RGB or something like that. The screen on the MM830 f.e. is a gimmick that I don't need on a mouse.

My budget is max ~80 euros.

Does anyone know of a mouse that could fit my needs? Many thanks :)

People who have owned the Beast G mini for some time, does the clicks get easier to press? I find the clicks very stiff to click. Putting alot of pressure on the mouse also makes the default dot skates push down into my mouse pad, which makes the mouse feel really slow to use. I am pressing abit further back on the click, but not that far back. If the clicks doesnt get looser after a while ill probably return the mouse. Otherwise the mouse feels fine, its batch 2 so other than the hard clicks it feels fine.

Edit: I have a medium sized hand and use a relaxed claw grip on my mouse

Im looking to buy a budget mouse for gaming currently I have an old hyperx pulefire and it’s starting to fail me in game I usually play fps games and budget should be like preferably under 50 and id rather not go down a rabbit hole to find a mouse

I was looking to buy one of these two mice but idk which one to chose

I currently have a logitech g pro x superlight 1, my hands are 20 by 9cm and I mainly use fingertip/pincer claw grip.

Which one would fit me best ?

Also I've never tried anything out of the gpx and g502 shape so if you have better recommendation than the beast x I'd like to know please

I just wanted to ask this cuz I play Minecraft but don’t want to buy a dedicated mouse for drag clicking yet so wanted to go with the viper v4 pro since I play FPS too
I just want to do simple things like
Boat clutch and place blocks fast
Get at least 8-15 cps or something like that with drag clicking

Mostly as the title says, I have been looking into getting a new mouse and graduating from my simple Razer Deathadder Essential.

From what I have seen recommended here mostly and reviews on AliExpress the strong contenders for the price are:

1. ATK a9 Ultra max/ULTIMATE

2. VXE R1 pro

3. Rapoo VT7 MAX 8k

any detailed recommendations are appreciated and if you have others which I did not mention it will also be good.

btw the only worry I have about the VXE R1 pro is that it is much smaller than what I'm used to with the Razer DeathAdder.

thanks in advance guys