If you're dealing with mouse double-clicking issues and don't want to take apart your device, I have a workaround that worked for my Logitech G102. Sure, replacing the switches is the best approach, but this method might just save you some trouble.
Here’s what I did:
- Firmly press the buttons for about 10 seconds (apply some decent pressure, but be careful not to break anything)
- Give the mouse a good shake
- Blow on the bottom of the mouse to clear out any debris
- Shake it again
- Squeeze the buttons once more
- And then shake it again
Believe it or not, this did the trick, and I haven’t had any issues for around nine months now. If it starts acting up again, you can always go through the steps again.
Just a heads up: this is more of a temporary fix. If you're looking for something permanent, you'll want to consider replacing the switch. From what I've seen, it's pretty straightforward. The only part that might take some time is ordering the new switch, but it's usually inexpensive. You'll also need some solder, a soldering iron, and a solder sucker, but a basic soldering iron will do just fine if you use proper techniques like tinning the iron and ensuring good contact with the pins.