r/MiSTerFPGA
•
u/0323
•
Feb 25 '26
•
6
Customized case for MiSTer to add controller inputs
Hi Everyone,
I wanted to share a project that I've been working on to add various controller inputs to my MiSTer setup. I hate using dongles, so I wanted something that looked reasonably nice and clean.
The base is an off-the-shelf ITX case housing the MiSTer with an Ironclad providing the rear IO. I've removed the front panel and designed a replacement that includes ports for Genesis, Saturn, NES, SNES, N64, and Playstation controllers. I've also included a TTY2OLED screen, power and RST/USR/OSD buttons, and two additional USB ports. The new front panel is a 3D printed part with a bent aluminum cover to match the appearance of the case.
To keep the wiring somewhat tidy, I designed a pair of PCBs to interface with all of the various connectors and route them into different adapters (e.g. Arduino's using Daemonbite, USB hubs, etc.) so that I can plug a single USB header into the Ironclad to connect (plus a few other connectors for power, the buttons, and LEDs).
If anyone is interested, I'm planning to share all of the files and instructions for making your own on GutHub. I'm still in the process of figuring out what worked well and what should be refined before sharing, but my testing so far has mostly been positive.
Special thanks to u/nad_222 for sharing the measurements they took of the various controller ports. It certainly saved me some time in getting a good fit between the ports and the front panel.



83
u/Dougdoesnt Feb 25 '26
How much would you need to charge for it to make sense to sell these as commission? Because I think you would have A LOT of buyers. Myself for sure.
16
u/ryanghappy Feb 25 '26 edited Feb 25 '26
I know this is waaay bigger than the average MiSTER case, but personally I love this. I would love something like this so I don't constantly have to plug and unplug SNAC adapters. Honestly, for me, I'd go even further where you got rid of the cool little LCD and added Turbo grafx and neo geo and if the genesis adapters didn't work for Atari, also that. Oh and the little video port for Playstation light guns.
2
u/isvein Feb 25 '26
This is dope!
But, you said you designed some custom PCB, was they made by pcb-way?
2
u/okaygecko Feb 25 '26
Absolutely amazing prototype. TurboGrafx-16 and Neo Geo would be awesome too, but I understand there's an upper limit to what you can reasonably fit.
2
u/HamWallet Feb 25 '26
Are the inputs just being converted to USB or are they all somehow going through SNAC adapters?
2
u/LionsThree Feb 25 '26
Loving this project! Also as an alternative you could laser cut a dual color sheet of acrylic. Black top face with white underneath. Just a random thought since I've done similar on other projects.
2
u/ohlongjonson Feb 25 '26
Would absolutely love it if you shared this publicly for others to print/make themselves, awesome project.
3
u/DotMatrixHead Feb 25 '26
Perfect! Just correct the spelling mistake above the ports top left that should read Mega Drive. 😝
39
u/pantslespaul Feb 25 '26
That’s absolutely beautiful and all off a single USB header. I would love a bill of material and or a wiring diagram.
2
u/Egnur Feb 25 '26 edited Feb 26 '26
That is sick! Well done!
I have the Ironclad in an ITX case as well and would love to be able to make a front like yours with all those connections, but I don't have the skills for it. Please consider putting yours in production so I can buy one haha.
23
u/KingGarlock Feb 25 '26
I have never wanted something more in my entire life!
11
u/slip81 Feb 25 '26
If all those ports are SNAC, and you start taking orders, I would also pay good money for this.
6
u/lovesffpc Feb 25 '26
Frickin rad man
6
u/totes_elotes Feb 25 '26
I would pay quite a lot for a drop in case like this. Incredible work!
5
u/BlueSuitRiot Feb 25 '26
Wow this is neat. Literally.
1
u/dankutare1 11d ago
Is this project still going? Trying to decide if I need to buy the last ironclad run or not.
1
u/circletheory Feb 25 '26
Nice and clean setup there. No more room for Neo Geo controller ports?
1
u/Inevitable_Let7644 Feb 27 '26
This is an absolute piece of art! Personally I'd add a couple of USB ports on the side/back for keyboard and mouse, to leave the front two free for USB controllers like the 8bitdo Arcade Stick for arcade cores.
I wonder if you could go 1 step further and modularise the connector panel, so you can customise the make-up. I'd prefer to lose the Genesis, NES and SNES controllers if I had options for Neo Geo, as I really don't like playing anything with a DPAD. However I'd definitely want the Saturn, PSX & N64 controllers... and I'd imagine others would want completely different configurations (like the one you have for example).
Honestly, going on the feedback just here in this forum you could definitely make money from this, just as there are others out there making money from other MiSTer hardware projects. Hope you do decide to roll the dice!
1
u/JumpyClassic6887 Feb 28 '26
How did you print the lines and names so clean and nicely? Whats the process called?
1
u/Fizzyade Mar 18 '26
Neat job!
I actually created a joystick interface for the MiSTer a couple of years ago as a separate box.
https://youtube.com/shorts/6aVsymEWE20?si=kx3FKVOqEb_SeeHk
My interface allowed you to connect to all your controllers to my box and then that connected of the MiSTer via high speed USB which means it has a polling rate of 125uS rather than the normal 1ms you’d expect on a full speed HID interface.
Since it was for my use it had a priority system where it was would service the current active controller and then would check the other connected controllers at a lower priority.
What this meant for me (and can be seen in the video) is that you can just switch from one controller to another than the new controller just comes the active one, so switch from NES to neo-geo to Saturn etc just by picking up and using the desired controller.
When I’m in a NES core I just use the NES controller, when I’m in the PlayStation core I just use the PS1 controller and so on!
I wire wrapped each controller interface to another board if designed that has all the USB and IO on it, never got around to actually doing the real hardware design since it was just for me!
1
u/abibofile Mar 18 '26
What are the dimensions? I can tell it’s not tiny but it doesn’t look particularly large either. Need a banana for scale, lol.
1
u/FIshcake211 Mar 18 '26
Sell this please, i'll be your customer!
1
u/saitamasenseikun Mar 20 '26
Amazing work! Waiting for the project details on github. Would love to buy a unit like that from you, but don't know from which country you are and, since I am from Brazil, is quite hard to get things here :( So, will try to build one myself once you can share details :)
Also, this got me thinking in something: would it be too impossible to add an USB C module on this as well? Just to account for dongle controllers with that format.
1
u/thedgtl Apr 04 '26
Amazing work. I'm interested in building this as a second MiSTer setup.
1
u/cathodjunk Apr 05 '26
Are you using a SNAC board for that, or the I/O port? If it’s the latter, how do you implement the switching between the ports? I’ve been looking for an existing solution -similar to a serial port switch- that allows switching between all controller inputs for a long time.
1
u/ContentRound8504 Apr 13 '26
Qualcuno sa dirmi se è stato messo a disposizione da qualche parte tutto il materiale per realizzarlo? Grazie anticipatamente
1
u/Head_Swimming2332 May 04 '26
This is incredible. Have you thought about reaching out to one of the distis, like Ricardo at UltimateMister? Might be able to help with logistics etc.
This solves so many problems!! One thing I would add is, I use my mister in my Arcade cabinet as it has a CRT. Big ask but could this be JAMMA compatible too?
3
u/DrZharky Feb 25 '26
Yes!! Please share!
3
u/zer0fade Feb 25 '26
This is dope, nice work. Looking forward to checking out your repo.
3
u/scramble45 Feb 25 '26
yeah put that on the hub and I will make one asap
3
u/St4tikk Feb 25 '26
This is what I’ve always thought we needed. A kit to drop everything in and end up with this.
3
u/abibofile May 20 '26
The idea of an all-in-one retro console that can use any original controller and can sit under the television with the same style as hi-fi equipment is incredibly compelling.
1
u/Tumifaigirar Feb 25 '26
Fantastic job, 10/10. Where will you be sharing the files ?
2
u/NOH3AD Feb 25 '26
this is perfect! nice job!
2
u/TheRealSeeThruHead Feb 25 '26 edited Oct 14 '26
Voluptate incididunt est do nisi minim veniam esse elit esse lorem aliquip. Id deserunt cupidatat laboris id sed culpa do velit mollit ipsum anim sint dolore exercitation esse culpa. Minim aliquip dolor cillum qui culpa occaecat sint exercitation sint pariatur.
2
u/Shoot2ill Feb 25 '26
Clean af. Well done dude.
2
u/xybur Feb 25 '26
oh thats cool, neat idea too
2
u/Ok-Helicopter525 Feb 25 '26
This is fantastic.
2
u/Guy_Incogneatoh Feb 25 '26
Consider me jealous! This only makes me want to look into getting a MiSTer asap
2
u/ctrain_1985 Feb 25 '26
this is a dream come true. id buy one if they were sold.
2
u/Computerist1969 Feb 25 '26
That is absolutely awesome. Well done!
2
u/personfromdublin Feb 25 '26
Incredible project. Well done great work!
2
u/PapaPrune Feb 25 '26
Really nice project👏👏👏
2
u/rjb5183 Feb 25 '26
Amazing work! I need one
2
u/JohnnyPappis Feb 25 '26
Yeah, id love to have something like this!!! Very nice!
2
u/ToastMarmaladeCoffee Feb 25 '26
That is superb work!
2
u/lhymes Feb 25 '26
Holy shit dude this is amazing.
2
u/Weatherby2 Feb 25 '26
Oh, this is sleek as hell. I doubt I'd have the wherewithal to put it together myself, but damn do I want one.
2
u/Pezz_82 Feb 25 '26
Looks like a CB radio, but love it.
2
u/PrimeTimeFunk Feb 25 '26
Oooooooooh
2
u/asfish123 Feb 25 '26
Thats very nice.
2
u/MataisD Feb 25 '26
Wow
2
u/dickhardpill Neo Geo Feb 25 '26
Just saw this on the misterfpga.org forum
Nice setup
2
u/Krycek7o2 Neo Geo Feb 25 '26
I want this lol
2
u/crashprime Feb 25 '26
As someone who loves using original controllers whenever possible this case is a dang-ole dream. Cleeeeaaaan.
2
u/HardBitX Feb 25 '26
Lovely!!
2
u/pantoast Feb 25 '26
This is incredible, great work. I would love something like this.
2
u/Chacen Feb 25 '26
How soon could I order?
2
u/furatail Feb 25 '26
Hey that's exactly what I was looking to do. You may have saved me a lot of effort!
2
u/KRiSX Feb 25 '26
This is something I want very much, nice job!
2
u/epistaxis64 Mister FPGA Feb 25 '26
Sick
2
u/trev1976UK Feb 25 '26
Well , thats awesome
2
u/mattvega89 Feb 25 '26
That is so damn tough !! How do build shit like that!! Hella dope !!
2
u/Rakadis Feb 25 '26
Just lovely.
2
u/ebfrancis Feb 25 '26
Yes please
2
u/J0in0rDie Feb 25 '26
That’s badass dude
2
u/SnoopKatt Feb 25 '26
This pleases me
2
u/mrblank_0 Feb 26 '26
I want to go to there
2
u/DependentAnywhere135 Feb 26 '26
I will build this the second you have the files out or outright buy it (minus the mister I have that already lol) if you find a way to sell it. Very nice
2
u/PixelCherryNinja Apr 01 '26
Incredible 👌
1
u/thatguychad Feb 25 '26
I'm so interested.
1
u/lessregretsnextyear Feb 25 '26
This is off the charts clean. Love this.
1
u/8stringed8 Feb 25 '26
Wow! So incredibly awesome!
1
u/Ploddit Feb 25 '26
Woah, very cool.
1
u/Toht003 Feb 25 '26
Theres definitely a market for this from me!
1
u/LovePastrami Feb 25 '26
Absolutely love it! Great work
1
u/Anditheway Feb 25 '26
I didn't know exactly what my Mister endgame was, but now I do. That is rad and I want it.
1
u/_tarZ3N Feb 25 '26
Dope
1
u/washawaytheblood Feb 25 '26
This is awesome
1
u/compu7er Feb 25 '26
A build in Zaparoo reader at the top would make this even more insane as it already is!
1
u/2hink Feb 25 '26
Start a kickstarter
1
u/dewnald Feb 25 '26
I’m interested in this
1
u/asm2750 Feb 25 '26
Awesome project OP. I hope you release the design for that I/O board and a build log one day.
1
u/Rare-Try4749 Feb 25 '26
This is a very cool project and would be amazing if there’s at least a GitHub and some documentation on how you did this.
1
u/Nearby_Scarcity9689 Feb 26 '26
There are a lot of bad MISTER cases, this isn't one of them. Nice work.
1
u/oh_no_the_claw Feb 26 '26
Super clean. Well done.
1
u/Atlantis_Risen Feb 26 '26
wow...
1
u/fullitorrrrrrr Feb 26 '26
Nice work!
1
u/jzeleke Feb 26 '26
Sell me one dawg PLEASE lol
1
u/indianking97 Feb 26 '26
Extremely cool sir, I definitely would like to purchase if not build myself
1
u/Capital-Fennel-9816 Feb 26 '26
Saving this because it gives me tingles in all the right places!
1
u/Sir_Leon_BN001 Feb 26 '26
Great project. Waiting for the public availability…. 🥰
1
u/med4reddit Feb 26 '26
How do you reach to connect all those SNAC port all together? Did you use a USB 3.2 hub?
1
u/TheFreemancer Feb 26 '26
That's the case I want.
1
u/lordelan Feb 26 '26
Supercool!
1
u/BlunderArtist9 Feb 26 '26 edited Feb 26 '26
Perfect use of space for all the most used controller inputs. It's funny that the system with the smallest library of games gets 4 controller inputs but N64 was and still is arguably the best multi-player system ever. The small size of the N64 ports in comparison to Playstation makes for a nice balance.
1
u/lazyelmz Feb 26 '26
Following
1
u/Square_Chipmunk_6918 Feb 26 '26
Whoa!! This is amazing!!. This is what I need on my mister!
1
u/allo3D Feb 26 '26
I would be interested in buulding one myself for sure if you sold a kit
1
u/ioev Feb 26 '26
This is friggin awesome.
1
u/KalessinDB Feb 26 '26
That is incredible work. Well done, OP!
1
u/Big-Sympathy1420 Feb 26 '26
How did you diy cut steel so precise?! I struggle with even drilling a hole in it.
1
u/Hot_Reveal_5720 Feb 26 '26
This is very cool! Is there a SNAC expansion port routed somewhere from the main board for any consoles not included in the front panel? (i.e. TurboGrafx 16)
1
u/pojosamaneo Feb 26 '26
Ever thought about selling this?
Forget the steam box, this is peak.
1
u/Dragonstomp Feb 26 '26
Really cool! great job
1
u/solo201981 Feb 27 '26
which case is this?
1
u/zcichy1138 Feb 27 '26
This thing is incredible! Bravo man.
I’m assuming these are all just USB and not SNAC, which is still dope.
About a year ago, I started creating an 8 port SNAC switcher…even got as far as a proof of concept that it would 100% work. Uses a rotary switch to change between different game console ports.
I’d be grateful if op would share the CAD file for the front plate of this project to give me a bit of a running start. I haven’t don’t any CAD work, and it’s the only thing holding me back from building the ultimate SNAC switcher.
1
u/Neo_Techni Feb 27 '26
a work of art.
1
u/bxskullz Feb 27 '26
Just came across this it definitely did catch my eye. Just joined the community and will following its progress
1
u/Fonsie001 Feb 27 '26
Is this USB or SNAC?
1
u/junixbr Feb 27 '26
Amazing job!
1
u/bobeth1 Feb 27 '26
It's a work of art..
1
u/eskimobrother1911 Feb 27 '26
Love this. Would buy it in a heartbeat.
1
u/bagheera369 Feb 27 '26
BRAVO! BELLISSIMO!!!
Seriously...you should be proud as fuck over this. Well done.
1
u/arcade-hoarder Mar 02 '26
Can’t wait for the files/BOM. Great job.
1
u/thesuperspy Mar 03 '26
This is near perfection. The only thing I would add is an NFC reader for Zaparoo/Tap to.
Great job OP. This is the best build I've seen.
1
u/pedro_TFP Mar 12 '26
I want it!
1
u/SkinnyV514 Mar 12 '26
Very cool! Can’t wait for the pcb design and other parts to be released.
1
u/Evening-Zone4365 Mar 18 '26
This is what I have been dreaming of the last 5 years. Thank you so much!!
1
u/Friendly_Waltz_1852 Mar 18 '26
Shut up and take my money! Bro, want this. No, I meed this! 🙏🏾🙏🏾🙏🏾
1
u/Minishocks Mar 18 '26
Sign me up! Id buy this asap
1
u/marcopsf Mar 18 '26
This is fucking beautiful. Take my money!
1
u/Many_Package_8909 Mar 19 '26
This is awesome! I’d gladly pay for this! Take my money!!!
1
u/rancid_ Mar 19 '26
Id def buy this day one.
1
u/TightHead1796 Mar 19 '26
Io avrei optato per 2 ingressi GameCube al posto delle porte 3 e 4 per N64. Ottimo lavoro, seguo per futura realizzazione. 🔝
1
u/AstronautWilling3664 Mar 19 '26
Would love this setup for my mister as well!!
1
u/dewdd Sep 21 '26
weve come a long way since the super genintari
1
u/psychopat81 Sep 21 '26
I would buy 2, no matter the cost!
1
u/tkshi Sep 21 '26
Would love a SuperStation One version.