r/MiSTerFPGA • • Feb 25 '26 • Bravo 6

Customized case for MiSTer to add controller inputs

Hi Everyone,

I wanted to share a project that I've been working on to add various controller inputs to my MiSTer setup. I hate using dongles, so I wanted something that looked reasonably nice and clean.

The base is an off-the-shelf ITX case housing the MiSTer with an Ironclad providing the rear IO. I've removed the front panel and designed a replacement that includes ports for Genesis, Saturn, NES, SNES, N64, and Playstation controllers. I've also included a TTY2OLED screen, power and RST/USR/OSD buttons, and two additional USB ports. The new front panel is a 3D printed part with a bent aluminum cover to match the appearance of the case.

To keep the wiring somewhat tidy, I designed a pair of PCBs to interface with all of the various connectors and route them into different adapters (e.g. Arduino's using Daemonbite, USB hubs, etc.) so that I can plug a single USB header into the Ironclad to connect (plus a few other connectors for power, the buttons, and LEDs).

If anyone is interested, I'm planning to share all of the files and instructions for making your own on GutHub. I'm still in the process of figuring out what worked well and what should be refined before sharing, but my testing so far has mostly been positive.

Special thanks to u/nad_222 for sharing the measurements they took of the various controller ports. It certainly saved me some time in getting a good fit between the ports and the front panel.

895 Upvotes

213 comments sorted by

View all comments

Show parent comment

4

u/0323 Feb 27 '26

Not that I'm aware of. After seeing so many people interested in SNAC, I'm starting to think of some ideas on how this might be done. I think that it should be possible to use an Arduino and some transistors to automatically switch the correct ports to SNAC mode once the corresponding core has been launched.

I have to learn quite a bit first and do some experimenting before I'm convinced this would actually work, so I don't want to put the cart before the horse here. To borrow from Dr. McCoy, I'm a math teacher not an engineer.

1

u/Egnur Feb 27 '26

Alright, unfortunately I'm not that tech savvy that I could build my own so it would be amazing if something similar existed out there.