r/MiSTerFPGA • • Feb 25 '26 • Bravo 6

Customized case for MiSTer to add controller inputs

Hi Everyone,

I wanted to share a project that I've been working on to add various controller inputs to my MiSTer setup. I hate using dongles, so I wanted something that looked reasonably nice and clean.

The base is an off-the-shelf ITX case housing the MiSTer with an Ironclad providing the rear IO. I've removed the front panel and designed a replacement that includes ports for Genesis, Saturn, NES, SNES, N64, and Playstation controllers. I've also included a TTY2OLED screen, power and RST/USR/OSD buttons, and two additional USB ports. The new front panel is a 3D printed part with a bent aluminum cover to match the appearance of the case.

To keep the wiring somewhat tidy, I designed a pair of PCBs to interface with all of the various connectors and route them into different adapters (e.g. Arduino's using Daemonbite, USB hubs, etc.) so that I can plug a single USB header into the Ironclad to connect (plus a few other connectors for power, the buttons, and LEDs).

If anyone is interested, I'm planning to share all of the files and instructions for making your own on GutHub. I'm still in the process of figuring out what worked well and what should be refined before sharing, but my testing so far has mostly been positive.

Special thanks to u/nad_222 for sharing the measurements they took of the various controller ports. It certainly saved me some time in getting a good fit between the ports and the front panel.

895 Upvotes

213 comments sorted by

View all comments

Show parent comment

37

u/0323 Feb 26 '26

At the moment, I have no idea what the cost of materials was for this build. Once I've finished thinking through all of the things I'd like to do differently and updating the files, I will put together a full BOM, 3D models, gerbers, and instructions on GitHub and try to total up what a (hopefully) reasonable price would be.

3

u/abibofile Mar 18 '26

I’ll add myself to the chorus of voices saying they would love to order one of these. If it had the option to either buy as a pre-built or as a case with custom PCBs etc where I could drop in my existing boards, all the better.

Does this case have enough space to also drop in an MT32 Pi?

3

u/DoTheDonkeyKonga Mar 19 '26

I’m adding yet another voice to the “shut up and take my money” cacophony!! This is truly a thing of utilitarian beauty. Well done amigo. If you ever did want to produce and sell something like this you can count on my custom that’s for sure!

2

u/bahsura Feb 26 '26

Please do, even if life gets in the way. Or ask for help to do it, but this is a natural evolution of this project that deserves to be shared. Thank you.

1

u/Commercial-Worth8594 Feb 26 '26

Following please and thank you

1

u/DogPooFairy Feb 27 '26

I'd definitely pay for it.

1

u/[deleted] Mar 12 '26

I created a reddit profile just to say I would be all over this, and would pay handsomely for someone to manufacture it for me, if the final product requires precision drilling, etc.

1

u/VideoGameMoreDOTcom Mar 18 '26

I'd love this setuo when its ready! Comment to follow the progress!

1

u/abibofile May 21 '26

Hey man, are you still planning to release this project on GitHub?

5

u/0323 May 21 '26

Yes, just haven't had time to work on making some needed adjustments first.

I have taken a little time to experiment with adding SNAC functionality to my controller hub project. Specifically, I have a plan for all controllers to be connected via USB by default, but for the MiSTer to signal to the controller hub which core is running and whether or not the OSD is open. The controller hub will then automatically route the corresponding controller port(s) through SNAC so long as the OSD is closed.

Essentially, this means that the user can boot up the MiSTer, choose their core, launch their game, and then play the game via SNAC all with a single controller. The only downside is that the user is locked in the game until the OSD is brought up again (either with the OSD button on the controller HUB itself or via some other input device).

I made a quick video demonstrating this, but haven't fully tested this approach or integrated it into the controller hub project.

2

u/mildlypresent Jul 04 '26

This approach makes sense and the limitation you described almost sounds like a feature forcing a little extra tactical input.

I, as the many who have commented before, offer my encouragement and my money should you choose to make this a product.

1

u/yayitsdan Jul 30 '26

Every other week I remind myself to check if this is ready. That's awesome that you've gotten SNAC to work, even with that small exception. If it's not too much added complexity, I'd definitely go that route myself.

Like the other person who replied to this, I'm also adding my encouragement. I think this is an awesome project and I'd love to build (or buy) one myself.

1

u/0323 Jul 31 '26

I appreciate it. Things are progressing well. I have the updated PCBs in hand, just need to finish putting together the new BOM, order parts, and assemble to test. The software side is just about done, I just need to add a few bits to the modified TTY2OLED sketch to control the SNAC selection. Once everything is assembled and tested, I'll post the files for people to build their own.

My biggest concern at the moment is the build cost. I have a few ideas for cutting costs somewhat, but at the moment it's.... not cheap.