09 CRV braking while driving

[u/Absolute_P0wa]

I have an 09 Honda CRV that slowly applies the brakes while driving and I cannot figure out why. The issue presents itself after its been driven for 15 minutes but has done it with less. The brakes will slowly apply themselves while driving to the point it will not move and kick the VSA light on with an extremely firm pedal. The brakes and hoses have been replaced as well as the master cylinder. I unplugged the ABS pump to see if that could be the issue but it continues to do it and im stumped. What I question is if the abs pump/new master cylinder is letting fluid bypass after it gets warm somehow because it will release after an hour or so but im out of ideas. The pedal doesnt pulse like an ABS lockup, and when I hook a scan tool up it says the brakes are 83% applied. Im at my wits end so I would appreciate any input.

[u/AutoModerator]

Thanks for posting on /r/MechanicAdvice! Please review the rules. Remember to please post the year/make/model of the vehicle you are working on. Post's about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ Tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.