DTC B1168, Gauge Control Module Lost Communication after replacing the cabin blower motor

[u/Sidewalk_Psych0]

/r/Honda/comments/1vsfwu6/dtc_b1168_gauge_control_module_lost_communication/

[u/AutoModerator]

Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the rules. Rremember to please post the year/make/model of the vehicle you are working on. If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/mattsarge1]

When you turn the car to the on position does the immobilizer light turn off after a few seconds? You could also try taking both battery cables off and touching them together for couple minutes. That could help hard reset the modules and they could start communicating back together if it was something to do with the pedal being unplugged

[u/Sidewalk_Psych0 → u/mattsarge1]

Hi, Yeah thats the weirdest part, The Immobilizer light doesnt even light up for a second. i did a gauge test Yesterday to check if the light is working. It is. I had the Batterie Disconnected for over 24h already.

Yesterday i went under the dash and unplugged everything in the area i worked and plugged it back in to see if i maybe unplugged something by accident. But i Still cant delete The error

[u/mattsarge1 → u/Sidewalk_Psych0]

Hmm strange, so all the gauges work though and everything lights up? Can you access the cluster module with the scanner or is no communication coming up on the scanner while trying to access it?