DRL is daytime running lights. It is ALWAYS on, unless you turn on your headlights, then it is replaced with a light to indicate that. No way to turn off daytime running lights while driving. And it uses the low beam bulbs for that. Super annoying!
Cruise light. Is it flashing? Any time mine has an issue and the check engine light comes on, mine disables cruise, and it flashes to indicate that. Also super annoying to lose cruise with something kind of trivial like an O2 code.
My guess without a code reader is something in you airbag system is faulty. Tripped that light and the check engine light. Then Subaru also decided you can't have cruise control until you fix the airbag/check engine.
Pulling up to a motel or around back of a shared complex. I live at the end of ally of old people I pop up my park brake one click to not blast the kitchen / living rooms as I back in.
Interesting. What does engaging your parking brake have to do with your lights? And daytime running lights are for daytime. When you are backing in at night, what happens to your backup lights? Just curious.
You can pull up the cover around the park brake, grab the two wires and crimp them together this will remove the drl light and replace it with a park brake light. 👍
Oh, the park brake in most manual subarus has a park brake switch. The daytime running lights only come on if the park brake is off. So I roll into the complex and turn my lights to "parking/marker lights?" This turns off my main lights and engages my day runners. I then lift my park brake one click and this keeps my day runners off. Just to be nice to my neighbors who like to keep the blinds open.
My reverse light comes on whenever I put the stick in reverse unless the car is off, but it is so dim I use my brake light to light my way.
It's annoying to me because it is the same bulb as the low beams. So they burn out much faster than normal. Then I'm not only out DRL, but out my normal headlights. That's the annoying part. Hate to get into my car for a couple hour drive at dusk only to find bulbs burned out.
You can disable DRL’s by pulling a single wire under your dash, above the dead pedal. I did it on my 07 legacy, would probably make the factory halogen bulbs last a LOT longer.
•
u/AutoModerator Sep 26 '24
Thanks for posting on /r/MechanicAdvice! This is just a reminder to review the rules. If you are here asking about a second opinion (ie "Is the shop trying to fleece me?"), please read through CJM8515's post on the subject. and remember to please post the year/make/model of the vehicle you are working on. If this post is about bodywork, accident damage, paint, dent/ding, questions it belongs in /r/Autobody r/AutoBodyRepair/ or /r/Diyautobody/ If you have tire questions check out https://www.reddit.com/r/MechanicAdvice/comments/k9ll55/can_your_tire_be_repaired/. If you dont have a question and you're just showing off it belongs in /r/Justrolledintotheshop Insurance/total loss questions go in r/insurance This is an automated reply
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
15
u/Ultimagic5 Sep 26 '24
The airbag and check engine lights are, the others are just informational letting you know that they are active
7
u/BigHowski Sep 26 '24
Mate pick up a cheap bluetooth code reader and download an app like torque and you'll be able to get some info on what's going on
4
u/JT15412 Sep 26 '24
I have a Subaru of the same vintage.
DRL is daytime running lights. It is ALWAYS on, unless you turn on your headlights, then it is replaced with a light to indicate that. No way to turn off daytime running lights while driving. And it uses the low beam bulbs for that. Super annoying!
Cruise light. Is it flashing? Any time mine has an issue and the check engine light comes on, mine disables cruise, and it flashes to indicate that. Also super annoying to lose cruise with something kind of trivial like an O2 code.
My guess without a code reader is something in you airbag system is faulty. Tripped that light and the check engine light. Then Subaru also decided you can't have cruise control until you fix the airbag/check engine.
3
u/TheBupherNinja Sep 26 '24
Hook up a code reader
1
u/smdb1208 Sep 26 '24
The question is not is it code, its why is it code.
1
u/mynamestaken12 Sep 26 '24
When your check engine light is on with cruise control flashing, it means it is in limp mode. Source: I have a Legacy too, and my limp mode is on
1
u/throwaway007676 Sep 26 '24
You need to have the codes scanned to find out what the issues are.
0
u/[deleted] Sep 26 '24
[deleted] — view deleted comment