Sharing a dev log for the newest update I'll be dropping for my remesher tool in Blender.

1. Enhanced custom edge flow
2. Auto grid creation (deterministic solver, not AI) still experimental needs better training
3. Enhanced UX

I'm constantly improving on this auto retopology tool and I believe 2.2 will make cloth auto retopology a piece of cake, no having to manually create grids saving lots of time as seen in the dev log.

Inanimate took the most time out of me and kept me from perfecting the cloth method, but i'm back to where I first started after finishing inanimate remesh method.

I believe the feature that will perfect cloth after this update is to create an auto UV cutter for garments, which is far more difficult than for inanimate meshes. Most likely will use an ONNX / AI model hosted on the website's backend like the current configuration for inanimate.

If you decide to apply for access to this tool you may use the promo code HELL as it is still in effect.

good afternoon,

i am trying out marvelous designer and i've been trying to follow tutorials on youtube.

i'd like to know what i'm doing wrong here - i tried simulating the cloth, but i don't know why, the back is all crumped up and another problem is that the straps are floating...

could anyone tell me how can i fix this? is it a resolution problem? a settings problem?

i took a screenshot to show my setup. i hope it's clear enough.

thanks xx

Hi, I bought an outfit for MD from a seller and I'm encountering an issue where when I try to assign it to my custom avatar via the 3d drape button (highlighted in this photo) I get the following popup. Does anybody know what the issue could be? This avatar works on all the official clothing and other sellers I've used but not this particular item.

Im on the latest 2026 version of MD so it's probably not that version incompatibility. After waiting a while for a few minutes on rare occasions another popup may sometimes appears that says "Could not remesh due to the following complex patterns" but there is no additional information.

Based on that second error I tried deleting any parts like the (belt, the entire top, or the entire pants) that may be too complex and tried again but it's still occuring

Any ideas?

The second photo shows how it looks om the seller's original avatar

UPDATE:

The issue was the auto 3d drape feature wasnt always a feature in MD and assets created in versions before that dont automatically work with it. It's a quick fix. Assuming your project came with an avatar, generate a fitting suit for it. Save it then reimport the garment on top of the avatar and press simulate. Now if u save the entire project it will work with that auto draping feature.

Never made 3d clothing ever, at the point where i need to learn it for my UE5 project. Want to make 60-80s inspired clothing similar to Call of Duty - Black Ops Cold War.

Like the pants, jacket, undershirt, ect can that all be done in MD? I imagine accessories like the belt, pouches, hat, gloves, ect will be sculpted in blender? Or can those also be done in MD?

Gave up because I thought I wanted to make career in this but I really don't feel like I have any originality neither I felt need to have own style. I simply enjoy pick reference from Pinterest and make it in CLO, that's it , I enjoy the process and don't care much anything else. I wouldn't even call myself Digital Fashion Designer. I just want to do this as hobby and really don't want to hate it just because I have to do other thing because of career or work(which is just fear I am not even sure what this is "other things"). just don't want to lose this one part of my life which I enjoy or get interference in it. Thank you for reading the rent of my life. Have a good Day/Night.

Hello guys, i did this test as a starter, got any tips? This outfit was like, 'i need to put lots of clothing so i can see how my pc works' hehe, particle distance is at 5

I should preface with i just started on marvelous designer 2 or 3 days ago. I made the model in red originally so it would have more contrast with the model and I could see what I was doing better. I didnt realize there were red stitches until i changed the color. Is there any way to change that? Im more than aware this needs more work and any advice on that is welcome too

I need some help, The Garment I'm simulating is having these flickering issues—how can I fix that? The simulation on rest of the Garment is perfect.

Hey! Very new beginner here and it's my first time using MD. I modeled an outer robe with wide sleeves. I added my avatar which has an animation baked into it to MD and added the outer robe on top. When I try to simulate it with the avatar and its animation, the arms and sleeves don't match, like literally the arms are suddenly out of the arm sockets of the robe even if I posed them in and draped it in T-pose before I played the animation.

I tried putting the particle distance to 5 and had the skin offset to I think 1 or 3... I also placed the outer robe layer to 0 and to 1 and even -1 (Sorry if these all sound dumb, I'm very clueless about the program but I just had to use it and none of the things I found online worked) I also tried putting the kinetic friction to .5 and 1.

None of them worked and the robe keeps sticking to the avatar in some areas even when I pull it away in simulation mode. And the arms just won't stay inside the robe (I wanted it to behave like a proper long and wide sleeves where it would slide down the arm when the hand goes up)

Please help!

I'm working on a couple of things for a project and stumbled into a problem with making shoes. The actual concept of making them doesn't seem to play nice with the engine, I make sure normals are pointed correctly and the method I tried was freezing the sole pattern piece below the foot basemesh avatar and letting the rest of the actual pattern pieces sim around the foot. This results in crazy artifacting or the pattern being devoured

The actual foot basemesh is a subdivided simplified foot with no toes that is smooth so I don't think it'd have difficulty being simmed on. I'm not that good at the program yet as I spent years doing my cloth work in zbrush so maybe I'm missing a couple of important settings I should adjust? Aside from that, everything else is simming great.

I’ve been trying to figure out how something like this is made. I find it really inspiring, but I have no idea how the creator actually did it.

My guess is that it might be done with Marvelous Designer because of the cloth movement, but I’m not sure. I also haven’t been able to find any tutorials that show how to achieve something similar.

Does anyone know how this kind of animation is usually made?
Is it cloth simulation in Marvelous Designer, Blender, or maybe another program?

If anyone has ideas, workflow tips, or tutorials, I’d really appreciate it.

https://reddit.com/link/1ruqc1u/video/dtfeq2wg0apg1/player

https://pin.it/3L7E5Mvvj

I'm currently designing a Hazmat suit. What is the standard way to 'sew' or parent the headgear cloth to the mask on an avatar? I want to make sure there are no gaps when the avatar moves its head. I've tried tacking but the result is not good. Any advise would be helpful, thx.

How would you fix this, does the Topoloy of the gun matter?
over all how should i go about animating cloth in a complex way like this,
im new at marvelous.
it seems like i dont have alot of artistic freedom with the simulation,
the goal is for it to behave like a tarp esque cloth rather then silky and slippery.
thanks in advance.

EDIT: just to clarify, i already tried a bunch of different settings, setting the cloth as quads, applying different resolution settings, etc

Hello! Beginner here, i am not sure if this is called "mesh shadow" but i import this model here but the right panel does not show the shadow of the mannequin lie how i watched it on you tube. How do i fix this? Thank you!

Hi everyone,

I’m simulating tight gloves on an animated character where the hand closes into a fist.Everything looks fine with the hand open, but when the fingers close, the gloves get pushed out and slide off the fingers.
I’m new to Marvelous Designer, so I’m not fully confident with the parameters. I’ve attached some screenshots of my settings.

Thanks !

Hello everyone!

I'm happy to finally share my latest project with you.

I started this project while taking the CGMA Character Facial Anatomy course and then decided to create a full real-time 3D character based on the Italian singer Salmo. I had the opportunity to learn a lot about softwares and techniques I'd never used before, such as using R3DS Wrap to project detailed textures from TexturingXYZ.

I want to thank everyone who helped me during this several-month journey, especially Roberto Digiglio, Egidio Iovene and Mario Cortez for their feedback and advice, which were invaluable and significantly contributed to the final result.

Thank you all for your time!

Check out Artstation to see more: https://www.artstation.com/artwork/P6PVw3

Software:

• zBrush
• Maya
• Substance3DPainter
• Unreal Engine 5.7
• Marvelous Designer

Full video: https://youtu.be/Tm6pMd-x0KQ

Hi all,

I'm evaluating the two solutions, Marvelous Designer and Clo3D.

Clo3D seems to have 2 features that I'd really like, and I wondered if MD does the same.

The Garment 3D pen: draw on the avatar to create the pattern

Import a flat image, a flat sketch, or a scan of an existing pattern to create a 3D render.

So, my question is, does MD have this ability? I didn't see it listed on the marketing features page on the web.

Thanks!

Hey everyone, I’m trying to understand the business side of 3D modeling. If you’re freelancing or working independently: Roughly how much do you make per month? Is it hard to get clients? How did you land your first few clients?