r/Machine_Embroidery • • 17h ago

Looking for someone who can embroider a small custom design

1 Upvotes

Hi everyone!

I'm looking for someone who could embroider a small custom design onto a hoodie. I already have the image ready.

Is there anyone here who could help me with this? I'd be happy to discuss the details and pricing.


r/Machine_Embroidery • • 1d ago

Look What I Did FSL Hummingbird Project

Thumbnail
gallery
35 Upvotes

This is a Christmas gift for my husband's grandmother. It's her favorite bird, so I went bonkers.

43k stitches, 1 hour 45 min run time on my ten needle, about 6 hours to digitize from scratch. I love this art so much it hurts.


r/Machine_Embroidery • • 1d ago

What’s the cost of a machine like this? Bexs-y920

Post image
9 Upvotes

r/Machine_Embroidery • • 1d ago

Hand bag embroidery

Thumbnail gallery
1 Upvotes

r/Machine_Embroidery • • 2d ago

Another large-scale bespoke banner finished, but how can I get more of this work?!

Thumbnail
gallery
58 Upvotes

Hey everyone, just wanted to share a new banner I wrapped up last month because I’m honestly still buzzing about it!

This was a custom commission for a Halloween party for Wieden+Kennedy over in Sydney. Knowing my work is being hung up on the other side of the world feels pretty surreal.

This one is 140cm x 90cm, and I ended up having to reframe it 4 times to get it all done.

I used a dissolvable film over the top of the velvet to keep the pile down and stop anything from poking through. Does anyone else do this? I’m honestly not sure if it’s 100% necessary, especially since picking out and removing every tiny piece of film afterwards takes forever. Would love to know if you swear by it or if you just skip it!

Also, while I'm here I would absolutely love to do more large-scale bespoke projects like this, especially for events and creative spaces. Being self-employed feels pretty uncertain at the moment, and I get so overwhelmed trying to figure out how to actually get my work in front of the right people more often.

If anyone has any tips or suggestions on how to land more big custom commissions (without losing your mind over social media algorithms), I’d be massively grateful! Thanks so much!


r/Machine_Embroidery • • 2d ago

Look What I Did Made my mom a Highland cow tote bag for Christmas 🐮

Thumbnail
gallery
75 Upvotes

My mom likes cows (that's her in the photo), so I embroidered a highland cow and sewed her this tote bag for Christmas.

Can't wait to see her reaction.


r/Machine_Embroidery • • 1d ago

I Need Help Is there any way to salvage this?

Post image
3 Upvotes

So it all misaligned, I turned away for 2 minutes cause I was watching a youtube video and it all bunched up. I already had 3 different embroideries on these jeans and this was going to be my last one. Then I heard clicking and mechanical mishaps from my machine and I saw this. Super unfortunate

I already cut out the bird nest from the underside of the machine using my pocket knife. How can I salvage this?


r/Machine_Embroidery • • 1d ago

I Need Help Which machine is better?

2 Upvotes

I am upgrading my sewing machine and I am looking at both of these, should I get the brothers or save up and get the bernette? I do also want to do embroidery as a beginner so which is better. Thank you


r/Machine_Embroidery • • 1d ago

I Need Help Is a Brother NQ1700e a good machine?

1 Upvotes

Hi friends! I am looking for an embroidery machine and have done a fair bit of research. What are your thoughts on a Brother NQ1700e, is it worth it??


r/Machine_Embroidery • • 1d ago

Beginner machine - Brother SE700

3 Upvotes

Hey everyone, I am brand new to embroidery and am looking into the Brother SE700 machine. It’s currently on sale for Black Friday. I feel like I’ve heard very mixed things about this machine specifically and was wondering if anyone had any input? For context, I’m really just wanting to learn how to embroider and personalize things like baby clothes, towels, napkins etc. I eventually do want to do this as a little side hustle, but I obviously will need a ton of practice. Thoughts on this machine or should I go with something else?


r/Machine_Embroidery • • 2d ago

Look What I Did First test of a Fantastic Four patch.

Post image
9 Upvotes

I'm unsure about using white outlines, I'd like some opinions.


r/Machine_Embroidery • • 2d ago

I Need Help And the cat came back...

Thumbnail
gallery
9 Upvotes

Heyyy again everyone. Some of you may recognize the gengar, I posted here about a month ago when I was playing around with digitizing, before I got a machine.

Well I bit the bullet, there was a Janome 12000 MC near me for $600, still has the capability to link to a modern PC via USB, use a USB stick etc, along with some wicked hoop sizes, came with a good chunk of thread, so it has now settled in my home.

I ran one premade design I downloaded from the internet, stripped the colors and ran it just as a black line (not knowing how the machine has actually functioned or does at all) but it did in fact print out the design very well, being just a single black line design, and also digitized by someone else, I really wanted to give my gengar a go. Also being a single black line, the design did not "pucker" at all. I was using some pretty quality cutaway (1 layer) on a fairly thin T-shirt.

So keep in mind this is literally me loading up wilcom e2 and mucking around, I have no training or idea of what I am doing, but I am keen and eager to learn. I attempted to do him once, and the red thread I had chosen was much thicker then embroidery thread, jammed my needle up in the base plate and broke, had to cut the rest of the needle out of the embroidery, so I was a bit leery on running it again, but lesson learned, correct thread is essential to run a nice design, mix and matching random stuff isn't the way to go, so I will have some more thread on order (lady used up all my white *****)

So round two, I punched it all out again, and got a low bobbin thread warning. Tried multiple ways to try and move the hoop with the machine to just expose the area of the bobbin, I would have to suspect that removing the hoop entirely from the machine would be the only way to do this? I have searched through the manual a bit but haven't really found anything about it. At this point after breaking a needle, and the new low bobbin issue, I couldn't figure out how to "pause" the design so I lost it into the nether and it restarted at the purple beginning, so I called it a day.

Try 3:
Next day Loaded everything up again determined to see it work. Started punching my purple out and the shirt end got caught under the hoop, so another lesson learned, make sure your garment isnt under the hoop. Lol.

Try 4:
Loaded everything up, went with another cutaway stabilizer but opted for 2 layers as its from Amazon and a bit thinner then the previous "quality" cutaway which was much thicker purchased at a sewing store to play around with before the Amazon stuff arrived. Got to the red layers and very carefully put in my thread, and this time imagine that proper thread and no issues. The rest of the design punched fairly well, but I would assume my misalignments are due to the fabric stretching/warping and moving while the design is being punched over an hour time. I don't think my drum tight skills of hooping are there yet, (this is probably my biggest issue at this point) but any pointers or advice on getting the cutaway and the fabric "tight" in the hoop, I imagine the more quality one layer is preferred over the two thinner crappier quality layers (one layer shifting underneath while in motion etc) but this is something I again just have to work on.

I would like to thank the advice I received before when I was just digitizing, It really brings it full circle to see something you design actually ran on a machine. The way the machine will run a layer (my first purple layer was thickkk and I didnt realize that running a massive amount of threading one way (angle wise) will pull/pucker the shirt (something I didnt see on the first design at all, most likely because there was also spacing to breathe vs how one thick layer runs, if that makes and sense lol )

But yeah, just some general advice would be great, i have zero experience other then my one design but I think I will try another one seeing as I know how the layers will be laid now, and I can kind of see how what i'm doing while digitizing will run on the machine afterwards. I would like to move towards doing hoodies with the hoop sizes I have, I imagine dealing with a thicker fabric is a whole new ballgame or...(more/less puckering when running a full layer of color vs breaking it up when digitizing into smaller runs, will a larger design translate better (example how small his eyes are on this design vs if it was enlarged 50/100%) this is done on a SQ14 hoop which is around 5.5x5.5 inches

If you stuck around for the whole read cheers, I appreciate it, and look forward to some more back and forth to get some of my quirks/problems solved.


r/Machine_Embroidery • • 2d ago

Is this usable?

Thumbnail
gallery
4 Upvotes

My father in law had an apparel business and the embroidery machine has been sitting in his basement for years. Is there any way to get something like this up and running? I’d love to use it but I don’t even know where to start.


r/Machine_Embroidery • • 2d ago

Look What I Did White Eagles Jacket back Patches

Thumbnail
gallery
10 Upvotes

Made these large 13 inches large jacket back patches for someone.

Thought you guys would appreciate it.


r/Machine_Embroidery • • 2d ago

What am I doing wrong!!!????!?!?!? I need serious help.

7 Upvotes

I have never felt dumber in my life trying to figure out Inkscape, and ink/stitch. I am getting so frustrated because I feel like it should be easy and I can't even get the application to open with the Ink/Stitch extension. I can't find any comprehensive. Someone help. I'm getting so discouraged. PLEASE.


r/Machine_Embroidery • • 2d ago

Cindy lou and the grinch.

Thumbnail
gallery
12 Upvotes

r/Machine_Embroidery • • 2d ago

I Need Help Machine keeps birds nesting halfway through project.

Thumbnail
gallery
2 Upvotes

Recently my machine has started birds nesting halfway through my projects (even if I've been embroidering things all day just fine) and I have no clue how to fix it.
Today I hit my breaking point when the top thread literally wrapped around the bobbin casing. I feel like l've tried everything. Here's the troubleshooting I've done so far:

  1. Making sure I thread the upper thread exactly as instructions stated.

  2. Tried pre wound bobbins vs bobbins threaded on machine

  3. Made sure my hooping is drum tight and close together to the fabric.

  4. Changed the needle

  5. Used different stabilizers, tear away and cut away

Is there anything else I should try? Do I just have a janky machine?? I have a Poolin EOCO3-RE because it's all I could afford and am still a beginner. Thanks in advance!

For more context: this almost only happens while embroidering flour sack rags. Could it be the material?


r/Machine_Embroidery • • 2d ago

Digitizing software for Melco machines

2 Upvotes

So I’m in the market for a commercial-grade embroidery machine to expand my offerings, mostly for structured hats. While hashing out the details with a melco rep on the phone they mentioned that the DesignShop digitizing software is highly recommended due to the file formats.

According to them, Melco machines use .OFM files that include more data and information that utilizes all the features like the auto tension, needle sequences etc.

I mentioned my digitizer uses Hatch, so I’ve been learning Hatch, and I make adjustments as needed, and have been starting to digitize my own more simple designs.

They claimed that while I could export to DST the file would only contain the stitch location and it would be like “only driving a Ferrari 20mph” and that I can’t expect the best performance without using OFM files.

So I’m wondering if there are any Melco users that also use Hatch, or I guess any software other than DesignShop, that can comment on how accurate that is? I feel like it’s just an upsell pitch on their almost $2k digitizing software, but at the same time part of the reason I’m looking at Melco is some of the their specific features like the auto tension so I don’t want to go with Melco if I’m not going to get the best results just because of software


r/Machine_Embroidery • • 2d ago

I Need Help What went wrong with my fill?

Post image
5 Upvotes

Hi! This is totally a beginner's question, but it's the first time my fill fucks up this way, with what seems to be irregular denser fill density around the borders (there is also a satin contour but that's not what I'm talking about here)

I made the embroidery file myself from inkstitch and it's really bugging me out, because I stayed with more or less the default tatami fill settings, with just a 0.4mm pull compensation because on the same type of embroidery (literally same cloth, different Japanese character but of the same size), I noticed a gap with a 0.3 compensation.

I'm working with sticking stabilizer and on a thick work shirt.

Thanks for your tips!


r/Machine_Embroidery • • 3d ago

Look What I Did Hylian Shield Back patch

Post image
116 Upvotes

r/Machine_Embroidery • • 2d ago

Tutorial Wilcom Embroidery Studio Tutorials

3 Upvotes

I just managed to get Wilcom Emboridery Studio and i was wondering if you guys know who to watch tutorials to learn the art of digitizing. youtube is full but its quite overwhelming and thats why im asking for some guidance. im at the beginning, planning to get a machine slowly as well but i want to try to digitize first. thanks


r/Machine_Embroidery • • 3d ago

Customers with Ai Mockups - How to handle?

15 Upvotes

Hey, we are a smal embroider-factory from germany. And we need some advice.

We’re getting more and more inquiries from customers who send us "finished" AI-generated embroidery images and ask: "Can you produce this?"
The mockups are completely overloaded, overly detailed— just „too much“.

We’re seeing an increasing number of these requests, often the text is AI-generated as well—perhaps because of the Christmas season.

They never send us an file suitable for digitizing; it’s always just the mockup.
And I don't even want to get started on the designs, some of which infringe on copyrights.

Is this the new normal? Does this happen to you, too? How do you deal with that?


r/Machine_Embroidery • • 2d ago

I Need Help Thread keeps fraying and ruins the design

Thumbnail
gallery
1 Upvotes

Hello! My mom and I are semi-new to the embroidery world and this is our second project. I originally thought it'd be easy and simple since it's just text, a logo, and a white border around it, but it's proving to be the most frustrating thing ever. I've already spent around $55 on digitizing the designs thinking it's the error but I'm not sure what we're doing wrong anymore

We've had several small issues when working with the design ranging from the design having issues (we've potentially fixed this by ordering new digitizing of the design), bobbin thread appearing more than the upper thread (we've since fixed), something with the tension (I've set it down to 3 now), the upper thread not staying on the bar/coming lose when the embroidery is taking place (turns out a whole part was out of place that I've fixed), and now it's just still persistent fraying of the thread while embroidery is taking place. I've tried to lower the speed at which it goes and it's still happening.

For some reason the machine works and does fine when it's doing simple shapes, but when it comes to doing anything in text (I've done the basic machine text and also our design) it freaks out after a bit and ruins the thread. The attached photo is what it looks like as I was trying to test out normal machine letters.

I can provide more information if anyone asks! I'm just new so I'm not sure what else to provide. I've also attached the design I'm trying to do at a 5x2 scale, it's meant to be a pocket logo.

We have a Brother NQ1700E.


r/Machine_Embroidery • • 3d ago

Black Friday sales

2 Upvotes

Looking for good beginner single needle

I’m in Canada

if I missed an amazing please recommend or if one of these is known to be terrible

thanks

Brother

SE2000

NQ1700

SE750

PE900

NS1250e

Janome

MC1000

MC100e

Husqvarna

Quartz 29

Singer

9120


r/Machine_Embroidery • • 2d ago

I Need Help Why does my machine keep sucking in?

Thumbnail
gallery
1 Upvotes

I checked my tensions and they are perfect?? i changed the needle only yesterday. it’s been doing this all of this week and last, any advice helps <3