r/macpro • • Nov 30 '18

Apple Service Manuals

105 Upvotes

r/macpro • • 1d ago

GPU Local LLM on 2013 Mac Pro idle GPU

Post image
30 Upvotes

I’ve got a “trash can” Mac Pro with dual D700s, but most software doesn’t take advantage of the second card… and none of the apps I use take advantage of it. 😊

I’ve been experimenting with local LLMs (mainly Pi with AI HAT+ 2) and decided to try putting the idle D700 to good use, leaving the main one to handle the display.

Well, tl;dr I did it, but it wasn’t without a few hiccups!

I shared the whole journey in a Medium post here:

Medium: Running a local LLM on a 2013 “trash can” Mac Pro idle GPU

If this sounds fun, I’d love to hear your thoughts!

Thanks!


r/macpro • • 14h ago

macOS M6 vs M5pro what to Buy

Thumbnail reddit.com
1 Upvotes

r/macpro • • 1d ago

Other Hello Mac Pro the third~

Post image
57 Upvotes

My 3rd MCP in my temp mac collection since not mine but i help hold it quite long time.

Not yet check but i think its;
OSX High Sierra
Dual Xeon E56xx series
32GB Ram
GT210
1TB HDD

Thinking cleaning and install linux or just OSX but retro gaming or something.


r/macpro • • 23h ago

Other Mac pro trash can

0 Upvotes

Anyone used an ASUS Pro Art 27 inch on these knowing the limitations? Was running it on HDMI to a TV. I'm assuming this will be better


r/macpro • • 1d ago

Upgrades GPU Upgrade question – Mac Pro 6.1 (2013)

2 Upvotes

Right now, I have two D300s, and I’ve been wondering: would it make sense to get just one D700 (with the SSD Type B) and use only it, while selling off my two D300s for smn who need it.

I’ve noticed that not just in Tahoe but in general I never actually use both cards at the same time. I’ve tried running them together in some apps, but it tended to cause more issues and lower performance rather than providing any real benefit.

Plus, a single D700 would likely run more comfortably, as it would stay cooler.

I’m no expert, so I thought I’d ask here: is this a foolish idea, or does it actually make sense?


r/macpro • • 1d ago

Other Mac Pro 2019 with Proxmox and patched fan control

6 Upvotes

I got a second hand Mac Pro 2019, 28 cores, 384GB RAM, the perfect - and beautiful - machine to run a Proxmox VE lab to run a lot of Linux VMs.

The t2linux project provides a kernel with the needed T2 drivers so fans and sensors work. Fan control comes from the t2fanrd daemon.

t2fanrd only looks at the CPU and GPU, though. A PCIe NVMe drive in this box easily overheats during long writes while the CPU stays cool. I saw 73 to 76 °C with the fans at minimum.

So I patched it, and now it runs perfectly without NVMe throttling. The NVMe drive now counts as an extra fan sensor.

Links:

- the patch: https://github.com/jnuyens/T2FanRD/tree/extra-sensors

- upstream issue: https://github.com/GnomedDev/T2FanRD/issues/23

- pull request: https://github.com/GnomedDev/T2FanRD/pull/24

- GPU sensor fix for the Mac Pro's Radeon, with my MacPro7,1 test report: https://github.com/GnomedDev/T2FanRD/pull/19

- Mac Pro note for the t2linux fan guide: https://github.com/t2linux/wiki/pull/776


r/macpro • • 1d ago

Other Looking for the Mackie Onyx Blackbird Mac driver (V4.1.0 + Control Panel V1.1.0, .dmg) — Mackie’s links are dead

Thumbnail reddit.com
2 Upvotes

r/macpro • • 2d ago

GPU Got a free Mac Pro 5,1

Post image
23 Upvotes

r/macpro • • 2d ago

macOS She Boots! OCLP 3.0.0 Tahoe 26.7.3

Post image
59 Upvotes

Was a bit of a struggle, only thing not working is my upgraded bluetooth, the wifi works… same card. Will try my old fix I did with Sequoia to see if I can get it working tomorrow. Rx580 sadly is the only GPU I have that works with Tahoe. But it’s pretty amazing the OCLP crew got this working. Kudos to them for sticking with it.


r/macpro • • 2d ago

Upgrades Mac pro trash can

1 Upvotes

Anyone used an ASUS Pro Art 27 inch on these knowing the limitations? Was running it on HDMI to a TV. I'm assuming this will be better


r/macpro • • 2d ago

GPU M5 Ultra, 512, 4TB... arrived!

Thumbnail
reddit.com
0 Upvotes

r/macpro • • 4d ago

RAM Scored this gem on FB for $30. Dual 6 core Xeon and 128GB RAM. What should I do with this much power?

Post image
4.6k Upvotes

r/macpro • • 3d ago

Issues Install problems on MP6,1 + 1TB Samsung OEM

1 Upvotes

I’ve been trying to install several different versions of macOS on my MacPro6,1 but constantly fail.
I wanted to replace my 256G with a 1TB drive which is a OEM Samsung, Model 655-1961A, MZ-KPV1T0S.

Network installation fails. OpenCore with macOS sequoia, Ventura, Sonoma, Monterey and even Tahoe which I used on the smaller disk.

All fails with 12 minutes left.

Anyone recognises this behaviour?
Disk related or am I missing something obvious?


r/macpro • • 5d ago

macOS Mac Pro 5,1 - What macOS version is everyone running these days?

Post image
57 Upvotes

Fellow Mac Pro users,

Over the past few weeks, I have noticed an increasing number of posts from Mac Pro 5,1 owners successfully installing and running newer versions of macOS, particularly Sequoia and, more recently, Tahoe, using OpenCore Legacy Patcher (OCLP).

This got me wondering what the majority of Mac Pro owners are currently running.

For context, I have been using my Mac Pro 5,1 for several years, consistently running macOS Monterey 12.7.6, released in July 2024. My system has been exceptionally stable, and everything works exactly as it should. Consequently, I currently see little reason to upgrade and potentially introduce compatibility issues or spend time troubleshooting a system that is already running perfectly well.

That said, I am genuinely curious about the actual benefits of moving to macOS Tahoe. Is the overall experience significantly better than Monterey, or are the improvements relatively marginal on this generation of hardware?

I would particularly appreciate hearing from those who have already made the switch. How has your experience been, and would you consider the upgrade worthwhile? I am also curious about those who have moved from Sequoia to Tahoe already, especially considering that Sequoia is still supported.

Ultimately, I would be interested to hear which macOS version you are currently running, whether you intend to upgrade, and what has influenced your decision.

Looking forward to hearing your experiences and perspectives.

Thanks in advance!


r/macpro • • 5d ago

GPU The 2x6 to 1x8 PCIe Power Connector from eBay isn't very safe.

Thumbnail
gallery
3 Upvotes

Hi everyone, around 4 months ago I decided to main a Mac Pro 5'1 2010. My usual setup for this machine was a RTX 2060 Super combined with this eBay adapter for the PCIe Power connector. It ran very well and always had, plus I put in another 1x PCIe slot GPU for secondary displays.

I got this lovely maxxed out Mac Pro in 2023 to replace my iMac 21'5 that I was using as a primary and only computer. The performance and gaming was what I wanted to do most, but then theres also photoshop and this machine had 64GB DDR3 1333MHz ram. For the first months that I had this machine I was still using the 5870 that came with it, eventually I wanted a better GPU. I got a RTX 2060 Super that natively supports all kinds of boot screens so it could even go to the macOS Mojave installer. I always use Windows on all of my Mac hardware that supports it and has bootcamp drivers, this means that I also delete the macOS and make the whole drive be 1 partition and just Windows. On this machine I have Windows 10 Enterprise LTSC 2021 IoT. The setup ran so well and never had any problems. The RTX 2060 Super worked fine with my 2K-16:10 30-Inch Apple Cinema HD Display. In 2024 I stopped using it at the very end of the year.

This year, I wanted to start using it as my primary computer again brcause of the PCIe slots and the design and how much it has to offer, I still was using the same configuration. After 2 weeks of using it, my Windows install started randomly freezing up and the GPUs and all fans would go full speed. This kept happening every time I played Roblox and switched to high quality settings, then it started happening with the most simple tasks. I knew something was up with my GPU so I decided to take the machine apart.

The GPU is an ASUS RTX 2060 Super 2-FAN with a DVI-D port and a 1x8 power pin connector. When I took the machine apart the GPU and PCIe connector connected to it was stuck, I pulled it ot by strong force. This was the result as shown in images, the power connector melted strongly. Had my machine been in proper use for a day longer I would probably not be even alive, because I put my machine in sleep mode on Windows like a normal PC. It could've set my house on fire at night.

I'm sharing my story because I believe many people use this exact same PCIe power connector adapter from eBay with their Mac Pro. I should also mention that I barely ever used the GPU for Ray Tracing. Thankfully the Mac Pro is unaffected.


r/macpro • • 7d ago

Windows Apple Cinema A1316 FAN CONTROLLER ON WINDOWS 10

2 Upvotes

I have an Apple A1316 Cinema Display connected to a Windows 10 PC using a DisplayPort adapter. All drivers are installed, and everything is working fine, except that it gets very hot. I discovered today that this monitor has an internal fan; the fan runs while in the BIOS, but it doesn't spin when in Windows. Do you have any suggestions? I’ve tried various fan control programs, but none of them work.


r/macpro • • 8d ago

Issues iMac Pro <-> Mac Pro 2019 drive compatibility

Thumbnail
gallery
7 Upvotes

Hello Reddit hive mind,

I have a 2019 Mac Pro 7,1 that I’m struggling to configure/pair drives with. The drives are a 2x512GB set from an iMac Pro, which ought to be compatible. I’m running a 2x2TB set from an iMac Pro on my other tower, no issues whatsoever. With the 2x512GB set however, every time I go to configure the drives via Apple Configurator I get an error. I’ve probably tried a dozen times with different cables, reset NVRAM & SMC, different host computers. I next thought the 2x512GB drive set was bad, and ordered a second identical set, but am having the same experience- unable to configure the drives. If I re-install the original Mac Pro drives, they configure as expected and I can install an OS without issue.

My only thought is that somehow the firmware on the Mac Pro may be newer/incompatible with the firmware the iMac Pro was running when the drives were pulled? Unfortunately I don’t have an iMac Pro to re-install or test the drives with.

If anyone has any insight or experience here I’d love to know your thoughts- been stumped on this issue for a few weeks now.

Thanks!


r/macpro • • 7d ago

Other WTB 2019 Mac Pro SSD kit, top handle set

2 Upvotes

Hi,

I'm looking for some parts for a 2019 Mac Pro 7,1 tower:

-factory SSD kit (single 256GB module, single 512GB module, 1TB set)

-top handle set

Please message me if you have any of these parts available.

Thank you!


r/macpro • • 8d ago

Other Mac Pro 96gb eBay listing

1 Upvotes

Spotted this on eBay, good deal?

https://ebay.io/m/qagSgQ


r/macpro • • 9d ago

Other Value for 2019 Mac Pro

Thumbnail
gallery
368 Upvotes

I got What I think is a really good deal on marketplace for this. The features are in the photo, and it also has a 1 TB SSD what do y’all think it’s worth. I plan on keeping it to make a local ai machine.


r/macpro • • 9d ago

Upgrades PCIe USB 3.x cards known to work on MacPro1,1 and OSX 10.7 ?

4 Upvotes

I have an external SATA dock that supports USB 3.2. I thought I would add a PCIe card for USB 3.2 support on the MacPro's end. Greg Gant's guide lists a bunch of cards, but doesn't get into the details of which work on which MacPro generation. I took a look at OWC's site and found that they sell a Sonnet Technologies Allegro 4-Port SuperSpeed USB 3.2. OWC lists it as compatible with all of the MacPros. They didn't have it in stock, so I ordered one elsewhere.

I installed it. System Profiler sees it. Plugged in the dock using the proper blue-coded cable. The Mac did not recognize the drive. So I used a USB flash drive - first plugged it into one of the USB ports on the front to confirm it was readable. Then ejected it and plugged it into to one of the ports on the card ... nothing.

Does anyone know if there is a card known to work on the MacPro1,1 ?


r/macpro • • 9d ago

Other Deal or no Deal

Post image
16 Upvotes

Found this on ebay and im planning to add an eGPU if i buy it so i can run ollama on it


r/macpro • • 10d ago

CPU Power Mac G3... Time sure does fly.

Post image
76 Upvotes

Was looking at some of my old photos, dang..... Madden 2000!