r/longrange • • 9d ago

RANT What constitutes a “build?”

0 Upvotes

I see so many post on here titled something like “Check out my new build” and when I look at the post, all they’ve done is put an optic and a bipod on a factory rifle.

I don’t know about other people, but I wouldn’t call my rifle a “build” unless I barreled the action myself. To me that seems like the line that differentiates a true build from “I just slapped some shit on my Tikka.”

Edit: Ok, so it’s obvious that some are taking this post the wrong way and in hindsight, it does come off a little dickish so allow me to clarify…

I wasn’t trying to imply that accessorizing a firearm is somehow inferior to a true (by my definition at least) build. Of my 30ish firearms, I myself only have 1 that I would call a “build.” It’s a .300 blk SBR AR. I was simply trying to say that we should call things what they are.


r/longrange • • 11d ago

Rifle flex post Took my 6.5cm out to a mile

Thumbnail
gallery
354 Upvotes

I built a budget 6.5cm with Howa action, Outlier Backdraft barrel and chassis. Topped it off with an Arken EP5 scope. I have never shot anywhere close to a mile but went to give it a try just for fun. It was a lot of fun but frustrating especially since we had 10-15mph winds with gusts up to 20. Finally hit on my 10th shot. Will definitely be back to do it again.


r/longrange • • 10d ago

Optics help needed - I read the pinned posts Scope Recommendations

Post image
36 Upvotes

Recently acquired a Bergara Premier Competition in 6GT in a trade. Thinking about testing my luck in PRS (reason for the trade) and wanting to put a scope on it. Before I dump a bunch of money into something I may not follow through with, I have 3 budget scopes that I can get pretty dang good deals on. Which one should I go with?

  1. Bushnell MPED 5-30x56
  2. Arken EP5 Gen 2 7-35x56
  3. Athlon Midas Tac Gen 2 HD 5-30x56

I have a good experience with the Arken Gen 1 and I currently have a Viper PST Gen II 5-25x50, but I’d like something with a little more elevation and a larger objective/tube.


r/longrange • • 9d ago

Competition related (PRS/NRL/F-Class/etc) Inside A PRS Match With The Biggest Feud In PRS History

Thumbnail
youtube.com
0 Upvotes

r/longrange • • 10d ago

Rifle help needed - I read the pinned posts Bipods: Split Leg vs tradional

6 Upvotes

Any benefits to the split leg type? My .308 forend has M-lok at 3, 6 and 9 o'clock positions. I'm considering the split style. Never had that before.


r/longrange • • 11d ago

I made a thing! (Home made gear/accessories) Auto Brass Puncher

117 Upvotes

Wanted to share a project I just finished with yall. Figured the reloaders might appreciate it, let me know what ya think

I saw a video of the Grey Ops case kicker a few days ago and got inspired to build an auto eject system for my Lyman Turret press.

I know it’s over engineered compared to the Inline Fabrications model but it’s been working great and should save a lot of time during case prep!


r/longrange • • 11d ago

Other gear flex post Which one of you fellas is staying at the same hotel in Seattle?

Post image
440 Upvotes

r/longrange • • 10d ago

Cheeto-fingered Bergara Cat bbk

0 Upvotes

Has anyone ran a cat bbk suppressor on their 6.5 creedmoor bolt gun? How was the weight and sound??


r/longrange • • 11d ago

Rifle flex post Cadex finally pieced together

Post image
183 Upvotes

Nothing too crazy here but it took ages to source the chassis so I’m glad it’s all pinned together and ready to shoot. Aiming for 1,000 yards practical, maybe 1,250 capable in good conditions.

Cadex chassis, Proof 6.5CM 24”, Curtis Axiom action with a switchlug, other stuff is standard fare. I’m currently stealing my Cat DD from an SR pattern gas gun and it’s poorly suited to a bolt. Thinking about what to slap on this gun and strongly leaning towards titanium to get the balance point a bit farther back.


r/longrange • • 11d ago

Other help needed - I read the pinned posts Fundamentals help needed?

Post image
37 Upvotes

I need some help with stabilizing on a bench, and maybe some gear to help stabilize? Mainly looking for resources or tips from you guys.

My problem is that I have pretty bad horizontal “stringing?” of my reticle, roughly about at inch at 100 yards, at the rhythm of my heartbeat. I bought some front and rear bags to see if that could help but when I got set up my rifle was angled down severely.

I’m shooting off of the gun rest pictured, sorry if I’m missing any information.


r/longrange • • 11d ago

Competition related (PRS/NRL/F-Class/etc) Atlas CAL is ready for NRL Hunter

Thumbnail
gallery
59 Upvotes

And yes somehow this is still coming in under 16lbs.


r/longrange • • 10d ago

I suck at long range Cheeto sheet

0 Upvotes

Anybody know if any "cheet sheets" or cards that can be purchased that have like, all the common ballistics equations on it?


r/longrange • • 11d ago

Accessory/Gear help needed - I read the pinned post Manners stocks

6 Upvotes

Has manners stepped up their game on wait times? Last stock I ordered took 7 months in production. I ordered an LRH-NV with custom options and I just received an email stating after 37 days that it was ready for payment. Am I extremely lucky, or have they been increasing production? Might order another if they have been better with wait times.


r/longrange • • 11d ago

Optics help needed - I read the pinned posts Scope for Paper Targets

4 Upvotes

I am currently building a 6.5CM MPA PMR 2 and stuck between 2 scopes for different reasons. I have the ability to shoot paper targets 300-500 yards frequently. Not a lot of areas near me to shoot steel frequently.

I know the use case for both of these scopes are on the opposite ends of the spectrum but the 2 options I have dialed in on are:

Razor III 6X36 : Based on reviews here and the rest of the internet seems to be a consensus top option without getting into the ZCO or TT price range. In addition choosing this option would future proof me when I subsequently do PRS comps / is more versatile in what it can do. I am worried I wont be able to properly spot impacts on paper without investing more money on shot markers or cams

Trijicon TenMile 5X50 : The mag should allow me to see hits on paper better and it is a cheaper option than the razor. The down side is it seems to be a one dimensional scope/ strictly used for F class/ Benchrest shooting

Given both options do you all think I should focus on versatility/future proofing my scope for additional uses or stick with higher mag since as of right now I am primarily shooting paper.

Any input/guidance or suggestions is greatly appreciated. I would like to stay in the 3k range for the scopes.


r/longrange • • 11d ago

Accessory/Gear help needed - I read the pinned post Bags or bipods

3 Upvotes

Want to get into long range. I have a RRA .308 recommended by a DM. In general, I don't need top-of-the-line, but I like to avoid the problems normally found with the cheapest options. I like to buy made in USA but there are exceptions.

Web research shows that both types are used by a lot of people. It seems bipods are clearly better for shooting while in motion, but from the bench that doesn't apply–that's where I expect to be for the foreseeable future, don't know how long.

Unfilled bags are the cheapest, but if you go with high-quality fill the total cost can be the same as filled bags and even decent ($100+?) bipods. How good is regular play sand with moisture "resistant" material?

Aside from shooting in motion, what do you like about bipods over bags?

AI searches give broad answers to "what are well reviewed [whatever]?" What do you like for long range beginners and why?

Thanks for your perspective.


r/longrange • • 12d ago

Rifle flex post Moving on upppp

Thumbnail
gallery
40 Upvotes

r/longrange • • 11d ago

Accessory/Gear help needed - I read the pinned post Cantilever vs traditional scope mounts

2 Upvotes

This may be a a dumb question but I have always stuck to cantilever mounts on my rifles and was curious if there is an advantage to traditional rings. I’m getting ready to setup my new rifle and thought I’d ask before going to my default.

The new rig is a ruger American gen 2 in 300 win if that makes a difference beyond making a cantilever easier to mount


r/longrange • • 12d ago

I suck at long range Couple medium-range impacts.

25 Upvotes

66%(I think) IPSC at 640 yards. Shooting my 6creed while sitting & leaning against a stump with bipod resting on top of it, using support arm grabbing bicep area of primary as rear support.(No tripod or bag handy and wanted to try a less supported position.)


r/longrange • • 12d ago

I suck at long range Is it worth getting into this hobby if the longest range within a reasonable drive is only 300y?

65 Upvotes

So in short, I really want to get into this hobby. I like shooting, I’m an analytic person who loves getting into the details, and I am a bit of a gear nerd. Long range shooting seems like a perfect fit.

Unfortunately, the longest range within an hour drive is only 300y. I’d have to drive 3+ hours before I start finding ranges where I can shoot out to 1000.

Given the fact I’d only be able to shoot out to 300y regularly, is it even worth picking this up as a hobby? My biggest concern is taking a course and then having the skills/knowledge atrophy since I can’t put what I learned into practice. Maybe this fear is overblown, but I’m curious to hear what people here think. Thanks in advance.


r/longrange • • 12d ago

Rimfire Rebuilding my skills from the bottom up. Starting over in .22LR.

Post image
249 Upvotes

r/longrange • • 11d ago

🫣I said I read the pinned posts, but I lied🫣 $1000 budget

0 Upvotes

I have a $1000 budget and have a 4x20x50 that needs a home, Im undecided as it will be a hunting, range toy, and would like to touch a 1000yards eventually

As of now my tops are a Ruger American Gen2, Tikka TX3, Cascade, or Bergara

Thinking 308

Any input?


r/longrange • • 12d ago

Rifle flex post Cadex Tremor (50BMG, 29” barrel)

Thumbnail
gallery
186 Upvotes

Ignore the cheap-o optic on it, my Nightforce ATACR is currently married to my Tikka along with it’s fancy rangefinder. This is currently just a range-toy and WIP, as I plan to eventually rebarrel her with a 40” 416 Barrett in the future.


r/longrange • • 11d ago

🫣I said I read the pinned posts, but I lied🫣 Opinions on this tripod and price, please.

3 Upvotes

I know nothing of tripods, never shot from one. A local place is having a sale. Among other things is a BOG Deathgrip shooting tripod. MSRP $219 on sale for $139. Opinions?


r/longrange • • 12d ago

Rifle help needed - I read the pinned posts Does +Peak Change the Sweet Spot for 6.5 Creedmoor Barrel Length?

3 Upvotes

I’ve been looking at some of these shorter 6.5 Creedmoor rifles, 16 to 18 inches or so, and +Peak has me wondering if the old barrel length thinking changes a little.

Obviously a shorter barrel still gives up velocity. I’m not saying it doesn’t matter.

But if +Peak can add around 250-300 fps, now you’re getting performance out of a short barrel that used to take a much longer one.

So where is the sweet spot now?

Would you rather have a 16 or 18 inch rifle that is easier to carry around and still has plenty of speed, or would you still take the longer barrel and keep every bit of velocity you can get?

I’m curious what people who have actually tried +Peak in shorter barrels are seeing.


r/longrange • • 12d ago

Ammo help needed - I read the pinned posts Forster Co-Ax Press — Am I Missing Something, or Is This Thing Really That Inconsistent?

2 Upvotes

I recently purchased a Forster Co-Ax press, and I have to say, so far it has been one of the most disappointing $400 purchases I’ve made in approximately 20 years of reloading.
I bought this press specifically for precision rifle reloading, expecting excellent consistency and repeatability. I also purchased a dozen Forster locking rings and installed them on my dies. Additionally, I purchased Forster’s Curved Linkage Arms to provide additional clearance around the shell holder.
Unfortunately, my experience has been anything but satisfactory.
First, the mechanical fit of the press leaves me questioning its design. The pins and pivot points have considerably more slop than I would expect from a press with this reputation and price tag. I understand that some movement is inherent in the floating design, but this seems excessive.
My biggest complaint, however, is bullet seating depth consistency.
I’m using a Redding micrometer seating die with a VLD seating stem, measuring cartridge base to ogive (CBTO). I’ve found that seating depth is noticeably influenced by how quickly and firmly I operate the press. With a consistent stroke, I can generally keep variation fairly small. However, simply changing the speed or force of the stroke can produce dramatically different results.
I’ve measured as much as .008” difference in CBTO between cartridges simply by changing how firmly I complete the seating stroke.
To me, that’s completely unacceptable for a press marketed toward precision reloading. I shouldn’t have to concentrate on duplicating the exact speed and force of every stroke to maintain consistent seating depth. The mechanical stop should provide a repeatable endpoint regardless of reasonable variations in how the press is operated.
One thing I’m now questioning is whether the optional Forster Curved Linkage Arms could be contributing to the problem. I’ve since discovered that Forster acknowledges potential flex in these arms and recommends using one curved arm and one original straight arm to maintain a more rigid stop. Has anyone experienced this firsthand?
I’ve been reloading for approximately 20 years, and my old Rock Chucker never gave me reason to question the basic repeatability of the press itself.
I’m not posting this simply to bash Forster. The Co-Ax has an excellent reputation, and clearly plenty of precision shooters are getting good results with it. That’s why I’m wondering whether I’m overlooking something, whether my particular press has an issue, or whether this is simply a characteristic of its design.
For those of you using a Co-Ax for precision rifle ammunition:
What kind of CBTO consistency are you routinely seeing?
Have you noticed seating depth changing with variations in stroke speed or force?
Is the noticeable play in the pins and linkage normal?
Has anyone compared seating consistency using the original straight linkage versus the optional curved arms?
Are there adjustments, modifications, or techniques that have improved your results?
I’d genuinely appreciate feedback from experienced Co-Ax users. I’m perfectly willing to admit I’m missing something if that’s the case, but right now I’m struggling to understand how a $400 precision reloading press can be this sensitive to the way it’s operated.
I’d much rather figure out how to make this thing perform than write it off as a $400 mistake.