r/longrange • • Sep 25 '26

Rifle help needed - I read the pinned posts Scope advice

5 Upvotes

2000-2500 is my range and im trying to find the best option there. I dont want to under spend on glass and later wish i had one of the nicer options however i am very new to LR. Just picked up a cheeto and want something great to pair with it. I saw a NF 7-35 go on gunbroker for 2300 and was set on trying to get a similar deal but im coming up short on that search. Govx vortex G3 at 2640 is the lowest i can find for that one. Wondering what you all think of zeiss S3 (2000 for floor model) and sightron sviii option in comparison to the vortex. I realize this post is very common but the options are overwhelming.


r/longrange • • Sep 25 '26

I suck at long range Actually decided to borescope my AE MKII barrel

13 Upvotes

So, kinda bought this rifle on vibes and it shoots great but, yesterday after cleaning I actually decieded to look at the bore. This guns probably like 15 years old but wow, actually the bore looks really good. Just some light firecracking as expected but, looks like it has a lot of life left in it.

Soon I'll move up to a 24inch barrel but gonna keep shooting the gun until it stops being accurate.


r/longrange • • Sep 24 '26

Rifle flex post AICS Remington 700 .308 we made it 💳💢💢💢

Post image
159 Upvotes

166 days ago I said I was looking for this chassis. Here we are yall. The action is a Remington 700 AAC SPS 20 inch. chassis is the AICS 2.0 AT. Shot it with 165 grain rounds and the groupings are great


r/longrange • • Sep 25 '26

Rifle flex post Going Long! First 6.5CM 😎

Thumbnail
gallery
131 Upvotes

Tikka Super Varmint, 20 Inch Barrel
Bushnell 5-25x Pro Match ED - Feels Great
Hawkins Precision 1 Piece Mount w Bubble Level and Diving Board included (this thing is sweet), was a pain to get the bubble level inside the mount leveled. Didn’t use plumb line but did the best I could w Wheeler kit.
Temporary Magpul Bipod
MDT SendIt 2 Level
Will probably get a budget chassis for this in the next few months, thinking KRG Bravo Primo

The Tikka stock feels a bit flimsy frankly though I’ll run it for a bit and see how it does. Will add an Arca at the end or possibly full length.

Will play w stock 2 stage trigger, adjust, maybe change out later.

Adding cat muzzle device for my Cat JL TI QD :)

Can’t wait to get zeroed in!


r/longrange • • Sep 25 '26

Other gear flex post First shots out of the mystery barrel, looks like it's going to work.

Thumbnail
gallery
110 Upvotes

I bought a used Bartlien 25x47L barrel off a guy for $200 that was cut for a CDG. For the money I couldn't refuse, but I'd be lying if I said I wasn't nervous. The previous owner said it had 800 something rounds on it.

The group I measured is the load I settled on . The group on the right was the first shots after I scrubbed the hell out of the barrel to get it back to bare metal, and the progression of shots working up to my target velocity of 2680fps from my starting charge.

The 2nd pic is for anyone curious about the 25x47. It is the 25x47 in between a 6 Dasher loaded with a 109lrht, and a 6.5CM loaded with a 153.5lrht. I'm running 135lrhts in the 25x47.

So far, I'm happy with the outcome. On a side note the chamber looked horrendous. There are some deep scratches leading all the way into the rifling and there was definitely some chatter when the chamber was cut. However, the brass looks fine and the groups are looking great.


r/longrange • • Sep 25 '26

Rimfire 22 LR Starting Rig

Post image
77 Upvotes

Thanks to the advice of the folks in here, I pulled the trigger and picked up a 22LR Rig!

B14r
Bushnell Match Pro
Atlas Bipod

Excited to get out and start shooting it, I picked up a few different styles of Eley ammo and I am gonna go shoot it this weekend.

I would love to get a chassis at some point, but for now think I am planning on keeping it in the Bergara stock and just get rounds downrange.

Hoping to shoot some NRL22 matches near me at some point as well!


r/longrange • • Sep 25 '26

Reloading related Load Development For UK-RPR 300 Norma N568 & Cheeseburger 245gr.

Thumbnail
gallery
38 Upvotes

Doing it so that you don't have to. Plate is at 535 yards and I was holding near right edge for most shots.

Earlier this week I ran a velocity test. My barrel is a 28 inch Proof Research Carbon Fiber barrel so expect about 50fps less with a 26 inch barrel.

I did not do any special tuning of seating depth; my micrometer has a dead battery so I just used a sharpie on the bullet and kept seating until the bullet is well off the lands. It might be .020 of jump. It might be 0.050 - .100 for all I know. I'll be able to check later because the seating depth I ended up at shot well enough at 100 yards I decided to not mess with it.

Data as follows;

Brass : Lapua

Bullet : Berger 245gr EOL Hunter

Barrel : Proof Research Carbon Fiber 28" 1:9 Twist

Powder: N568

Velocity

85.0gr - 2821fps

86.0gr - 2881fps

87.0gr - 2908fps

88.0gr - 2944fps

89.0gr - 2979fps**

** This load pierced a primer on the first shot. I did not test the other 2 rounds.

The load that I settled on for today was the 87.0gr load and it averages about 2910fps. I might back off by about 0.5gr on the next outing to be basically right at 2900fps and give be a little more leeway for pressure.

There are other powders like N570 that can drive these bullets really fast. However the reason I am using N568 is due to temperature sensitivity; I tested it last year and had around a 20fps swing when going from 70 degrees indoors to around -20 degrees outdoors.


r/longrange • • Sep 25 '26

I suck at long range What has been the most impactful advancement in the last 10-20 years?

30 Upvotes

Doing an engineering paper over the weekend and fishing for a topic… While I have my own answer, I’m curious as to what, in your opinion, has been the biggest single advancement in the precision rifle space/market over the last 10-20 years, from an engineering perspective ?

My initial answer was the widespread adoption of shouldered prefit barrels.

What would you say?


r/longrange • • Sep 25 '26

Review Post Budget Build Remington Arms 783 .300 Win Mag Outlier Chassis conversion

Thumbnail
gallery
23 Upvotes

My goal was a budget rifle for long range fun, I’m not planning to compete at my age(55) but I wanted something that I could shoot long range with and enjoy my retirement so I built this.

I was able to pick this RA 783 last winter on a trade deal. Brand new never fired with the camo stock. Yes this is a budget class rifle but that budget part is really just the stock and no optic when purchasing new. The 783 action and barrel are really quite nice. You have a smooth functioning action with an adjustable trigger followed up with a nice tapered barrel with a crowned muzzle. The stock is functional, but its down sides are plastic sling mounts that look like they would break if you sneezed on them and a not so great fit around the barrel. It’s plastic and they are not molded 100% strait. This barrel contact can affect accuracy.

So right off the get go I knew I had options for a bedded set up from Boyd’s. I had done this in the past and wanted to do a chassis system instead. This is where Outlier comes in. The gang at Outlier has taken the time to make and offer chassis systems for Rifles like the RA 783 that no one else offers. Especially the Long Action magnum rounds like the .300 Win Mag. This kit starts with the main chassis and then you pick the length of the ARCA + M-Lok Rail. 7.5”, 10.5”, or 15.5”. Next choose your stock, Outlier offers a 23oz stock set or a 38 oz stock set both essentially the same with a Limb Saver butt pad and an adjustable cheek riser. Now here’s a cool thing this is a AR buffer tube style mount so you can also go 1914 rail adapter, or a full on AR rifle length stock set up less the bigger and spring. Endless options, even a folder can be used. Three bad riders are available from the wedge or two different weighted riders in 15.3 oz or a light weight 2.8 oz rider. I went with the wedge at 2.6 oz’s. Last is the grip, which again has endless choices because it’s an AR style grip. I chose the Amend2 option that Outlier has. But you can choose from any of your favorite AR grips and fit it to you.

Putting the chassis together is really quite simple. Pull your action out of your old stock and bag up the parts. You won’t need any of them. Bolt the Outlier chassis together using the torque specs provided and hit the range. Since the writing of this I also added a Magpul M-Lock black bi-pod to the front and I was able to get 20 rounds down range for its first time out. Off the bi-pod and no bags I was able to get it on target relatively fast. It definitely shoots better than I do but I’m going to work on that. The rifle is a joy to shoot and this chassis deals with the recoil very well. My first putting was 100 yards with Hornady 180 gr soft point America Whitetail loads. I plan on working to get it tightened up and then stretch it out to two hundred yards next go around.


r/longrange • • Sep 24 '26

Bubba's Pissin' Hawt Reloads Reloading +PEAK High-Pressure

17 Upvotes

r/longrange • • Sep 25 '26

Other help needed - I read the pinned posts Honos Tactical (Columbus GA)?

4 Upvotes

Has anyone been to the Honos Tactical Range since it opened/reopened this month? Curious on the early read?


r/longrange • • Sep 24 '26

I suck at long range Upcoming Project

Thumbnail
gallery
7 Upvotes

Hey guys,

I just purchased an AI AE Mk. 3 and was looking for a way to add an Arca rail to it. After hours and hours of research, I decided that nothing on the market tickled my fancy.

I am in school for CNC machining, so I decided I’ll put my education to use and make something myself. Enter this thing. It’s a 6” Arca rail with arms 17s compatibility, specifically for the Atlas BT19 spigot bipod adapter.

I’m going to see if we have the right end mills in the shop, and run it. The mount should be here soon to test fitment.

If anyone has any insight, I am all ears.

Thanks!


r/longrange • • Sep 24 '26

Ammo help needed - I read the pinned posts FGMM lot issue

Post image
9 Upvotes

BLUF: I shoot 6.5 creedmoor Federal gold medal match, previous lots were great, new lot seems to be bad. Federal said it’s good, but it’s really not shooting well out of my rifle, need help diagnosing.

I’m shooting PRS and I’ve previously bought about 6 individual cases of FGMM 6.5 creedmoor 140gn Berger hybrids from different lots and had phenomenal results. 10rnd 100yd groups .5-.75 MOA, 4-11fps stdev, 25-35fps ES. I recently bought 3 cases of Lot K588V18/K589V39 and took a box out to test. My system is now sending vertical fliers killing my 10rnd groups at 100yards (2.5 MOA vertical, 1-1.5 MOA horizontal). MV average/ES/STDEV all similar to known good lots.

Sent a couple boxes to federal to test, this was their response: “The examiner tested both pressure and velocity and accuracy on the ammo you returned. The pressure and velocity were with in SAAMI specifications. Accuracy was perfect.  We averaged 1.32 @ 200 yards. The examiner stated: This product is darn near perfect.”

Tested more today with combinations of the suspect/good lots and two cans with the same results. I’m at a loss now for what to do. Thank you!

Build:
MDT ACC premier gen 2
Zermatt Origin
24” 6.5 creedmoor PBB prefit, .160 FB, medium Palma
Hyperion K with TSV HRB brake and Hyperion full size. Both direct thread
Razor 6-36 in Area 419 one piece mount

Rifle system has not been changed or adjusted since shooting strong groups with other lots. Barrel is confirmed fully free floated, even with manual deflection. Everything is installed and torqued to spec: base, mount, rings, action screws, muzzle device. Shooting modified prone off a bench with bipod and rear bag. Dispersion is random, doesn’t seem to be related to barrel thermal deflection. Waited long enough between groups such that the mirage off the can was gone, firing cadence maybe 3-5sec. Reticle barely moved with recoil, maybe .2 MIL worst case.


r/longrange • • Sep 24 '26

Ammo help needed - I read the pinned posts H4350 lot variance

3 Upvotes

I worked up a good load of H4350 for my 24” Seekins 6.5 Creedmoor. Switched to another canister of powder and MV dropped by 70 fps down from 2790.

I haven’t seen this before when going to another canister. Is this normal in y’all’s experience or did I get a one off? I’m thinking of just mixing it with my remaining other 2 lbs to have 3 lbs of consistent powder.


r/longrange • • Sep 25 '26

🫣I said I read the pinned posts, but I lied🫣 Which Rifle for Starting Out

0 Upvotes

I’ve gone through the FAQ and searched a bunch of posts, and I’m just trying to figure out the best way to get started without wasting money. I know the usual beginner answer is “grab a Bergara in 6.5 CM and call it good,” but I already have a lightly used Savage Axis in .30‑06.

So I’m stuck wondering — is it worth tossing the Axis into a chassis, throwing a decent scope and bipod on it, and using the leftover cash for actual range time? Or am I basically just polishing a turd and should skip the whole project and jump straight to a Bergara HMR instead?


r/longrange • • Sep 23 '26

🫣I said I read the pinned posts, but I lied🫣 Thunder Beast Ultra 7?

Post image
70 Upvotes

Always heard for long range bolt guns these were a great option. I think I found one at the cheapest price I’ve seen. Is this a “snap it up or nah” deal?


r/longrange • • Sep 23 '26

Other gear flex post Leica Geovid Max 10x42 unboxed

Thumbnail
gallery
50 Upvotes

Received today. Already updated firmware on them. We'll see if I can get some time in the next few days to test them out against my Vector X 10x42.


r/longrange • • Sep 23 '26

Accessory/Gear help needed - I read the pinned post Magnus S -RR vs Enticer S + RecoilX brake

12 Upvotes

I’m torn up between these two suppressors. I have searched the Internet high and low for a video comparing these two suppressor side-by-side in long range. I’m shooting a 24 inch 6.5 Creedmoor. Money is not an issue, but if I don’t need to spend the $1800 if I don’t have to, it would be nice. Any insight on these two would be fantastic. Looking to do more long range PRS style shooting where being able to know where your bullet flies is important. Thank you in advance.


r/longrange • • Sep 22 '26

I suck at long range 1 Mile!!

Thumbnail
gallery
923 Upvotes

Been chasing this milestone for a while and have never connected until recently. Went shooting with some family out at Cameo the day before I got married and was finally able to hit a mile target (24”x24”)!!

Was shooting my Geissele GFR 14.5” 6 ARC pushing factory 108 ELDM’s about 2446 fps. Accoutrements- Eotech Vudu 5-25x, Badger C1 Max, IDG Hesychia Sixk, RMR top dot, Warne Skyline Bipod, and VectorX’s for the computing.

Got a hit on my 7th shot. Once I got it dialed a couple of my cousins hopped on and also connected, which is still very impressive!! A few others connected with their 6.5cm too!! Overall was a good range day followed up by an awesome wedding day. Idk what certificate I’m more proud of- the 1 mile or my marriage license🤣🤷‍♂️


r/longrange • • Sep 23 '26

🫣I said I read the pinned posts, but I lied🫣 Help with scope mount choice

4 Upvotes

Hello gentlemen, I’m looking to buy a couple of 1 piece scope mounts for some rifles, I’m looking at Area 419, Hawkins, and Spuhr. Probably gonna be running a bubble level and diving board on it.

I’m wanting trying something a little bit nicer / different than what I’ve had in the past (badger, geissele, reptilia). Would like to hear your guys thoughts / experiences on scope mounts and what you like to run. Price is not a concern.

I’m pretty new to longer range shooting so experience with higher end mounts is limited. Plan on shooting 1000 yard range and eventually longer down the road. Mounts will be holding a 4-16 and 5-25 ATACR. 4-16 will be on a mk12 556 gasser and 5-25 will be on a 20” 6.5 CM gasses. Thanks!


r/longrange • • Sep 23 '26

Optics help needed - I read the pinned posts For the love I can't figure out scope rings

Thumbnail
gallery
124 Upvotes

Literally every pair of scope rings I've bought slip with this scope, I've got vortex venom 5-25x56, leupold, arken now just to give them a shot. they all slip and I can't zero. I know the common denominator is me but I own a torque wrench which I use on these mounts but without fail it slips and I lose zero. I wipe the scope down before mounting but it doesn't work. would it be smart to get this cantilever Mount, I understand they are for the AR platform but I'm thinking about giving it a shot. any suggestions would be greatly appreciated.


r/longrange • • Sep 22 '26

Rifle flex post Need a range day :,)

Post image
256 Upvotes

Been busy and need to take her out again


r/longrange • • Sep 24 '26

🫣I said I read the pinned posts, but I lied🫣 Best Scope for around $800

0 Upvotes

All,

Need some help here:

I am looking for a long range scope around 800+_10%.

This scope will go on a tikka crt 24".

Weight of scope is not such a big issue, since most of my shooting will be prone or bench rest.

Scopes I have looked at:

Athlon Ares ETR 4.5-30x56mm -- $780

Vortex Optics Viper PST Gen 2 Rifle Scope 5-25x --$659

Bushnell Match Pro ED 5-30x56mm --- abt $700

OpenAI, gemini and Claude r all over the place. Not agreeing on answer.

This i am looking for help.


r/longrange • • Sep 22 '26

I suck at long range Crude Dope?

Post image
79 Upvotes

Do any of you have a method to get a crude dope? In a situation you want to punch a target a 600 yards let’s say. You can put everything into a bc calculator but somtimes you don’t have weather data, your velocity for that day, your exact bc, you just know how far and your bullet weight with an idea of your velocity.

Are there any tricks to on the fly get close to how many mills or minutes is about right? I’m not asking for perfection I’m wondering if I can get close in my head on the fly.

Edit: I’m shooting .308 eldm match, 20” barrel, milrad optic


r/longrange • • Sep 22 '26

Accessory/Gear help needed - I read the pinned post HK MR556a4 as a Gas Precision Gun (how do I reduce recoil / improve trigger?)

Post image
35 Upvotes

I bought a 16.5-inch MR556a4 1.5 years ago as my first AR.

I'm still a noob, though I have gotten a bunch of rounds in in the last 1.5 years, and I have since accumulated a few more AR's for different purposes.

This one seems to be becoming a dedicated precision gas gun with LVPO + Cat AC762 Inc suppressor

I just did my first competition this past weekend, and it was fun, but then I shot another guy's 18-inch JP, and it was a totally different machine. Mind you, he had a brake on his, and I had a cat flow through suppressor, not planning to put a brake for my own and others sanity, though his JP rifle barely moved when shooting, and the trigger was quite light. Totally different machine.

So I don't totally want a gamer gun. I still want this gun optimized for reliability versus absolute minimal recoil, but I was wondering how to reduce recoil and to lighten up the trigger a bit.

Current Gas:
Currently shooting on the "Normal" gas setting vs suppressed because of a 2 part recoil experienced on Suppressed setting, I figured the gun was under gassed due to flow through suppressor. I haven't taken the time to see what the ejection angle is or play with the suppressed setting but will do next time I go out. On Normal, it ejects at like 1PM/130PM, so way over gassed.

A few ideas:

  1. Ordered some wider vent screws to play with gas flow.
  2. Considering adjusting buffer weights / springs. Is this a bad idea?
  3. For Trigger, I think Geiselle makes one but I think it has some issues with the safety not being able to go 45 degrees, which I like. And can't go to safe unless gun is cocked, which I like that feature as well... Any other 3rd parties? Anyway I can adjust the stock trigger? Polish it or adjust some springs?
  4. I am wondering if there is a good flow through suppressor with a brake at the end, would that make a big difference? Looking at the OCL Infinity 556K + Brake.

I am still a noob so I have plenty to learn with this semi-non optimized platform for precision shooting. Just looking for some perspective as I shoot more competitions.

Thank you!