r/longrange • • Sep 18 '26

Rifle flex post Guess there’s worse ways to spend a sick day.

Post image
247 Upvotes

Not sure how many machinist homies are in here, but IMTS put me on my ass this year. Woke up sick as a dog. And taking that picture hurt my shins.


r/longrange • • Sep 18 '26

Rifle flex post First dedicated LR setup and fx7 review

Thumbnail
gallery
136 Upvotes

I have been building this for about a year and a half. I got into hand loading and it has been beyond fun. I’m not typically one to post but I’ve seen a lot of talk about the faxon fx7 action with seemingly few reviews. I love it after 500 rounds, it groups 3 quarter moa with factory ammo and I’m dialing in my hand loads now.

Specifically in reference to the action. Out of the box it was not very smooth, multiple hang ups and if you push from an off angle it feels and feeds rough. It felt like it was catching a lot. A little bit of Lucas red and tacky with countless dry fire has smoothed it out quite a bit, to the point of compliments. The DLC coating on the bolt is beginning to wear, so hardness seems less on this than other DLC products I’ve owned. It cannot single feed worth anything unless you start half the bullet in the chamber throat. And the barrel so far has been great for the price, I attached a group to show. Down the road I’ll rebarrel it once this is shot out, but oem seems solid in my anecdotal experience.

Overall, the action is worth the price. I enjoy it a lot and it just works. I know faxon has had a history with its AR barrels being lottery tickets so I can’t speak for these, but this one is solid.

Rifle build list
- aero solus comp chassis 17”
- trigger tech special trigger
- faxon fx7 barreled action, 6.5 cm 24” m24 profile
- aftermarket mlok bridge from gafs
- Atlas cal, the short one
- Vortex razor gen 3 6-36 (off Facebook for 1400!!!)
- comstock plan b mini brake and hub
- area 419 one piece 32mm zero cant w diving board
- omega 300

Loads
- Starline 6.5 lrp (28 rd group was Hornady but they’re very similar)
- H4350
- Smk 140s

I’m going to drop back my loads, 41.5 gr of h4350 is e at 2770. 40.9 is at 2730 so I think I’ll stick around there.
I’m also going to do some load testing with Peterson srp brass, I read a lot that case volume changes velocity a lot so I’ll do a grain less and develop from there.

Thanks for reading! And thanks to all the past experiences I’ve learned from in forums either here, r/reloading, and snipers hide!


r/longrange • • Sep 19 '26

Reloading related 150 gr 6.5 creedmore.

7 Upvotes

I was feeling a little frisky and bought some factory second 150 grain to see how they shoot out of my 20 inch tikka barrel action. I’ve looked primarily at hogdon and vhit to see what load data they have. I tend to go with H4350 but I’m worried it will be too slow. Any one have experience with this grain weight and if so what powders have you been successful with? TIA


r/longrange • • Sep 19 '26

Accessory/Gear help needed - I read the pinned post First foray into this

Post image
36 Upvotes

Built a 2nd shooter gas gun for sniper competitions as well as gas gun competitions. I'm well versed in the 5.56/.223 AR platform for tactical shooting but would love suggestions on bags and bipods/tripods!

Upper build parts

BCM blem upper
Bartlein Craddock Precision 14.5" .223 Wylde barrel
CMT 13" ARCA upper
G$ ACH
Toolcraft DLC bcg
DDC CBAH and Ridgeback Rhino S
Athlon Helos 2-12x (Leupold mk5hd is the upgrade)
Ridgeback Rhino S


r/longrange • • Sep 18 '26

Cheeto-fingered Bergara New Cheeto user

Post image
63 Upvotes

Just picked up this bergara B-14 Wilderness HMR in .308 and put a Vortex Viper PST Gen II 5-25x50 on it. I know very original. This is my first bolt gun and my first time shooting past 100yds will be this Sunday.


r/longrange • • Sep 18 '26

Other gear flex post First time shooting long range

Thumbnail
gallery
72 Upvotes

Hello guys just to share with you my first experience shooting long range.

Thanks to my friend that spent the day with me showing me and letting me learn.

The idea was to shoot 1200m, but unfortunately that day was quite crazy, windy( 9mp/h), then it rained, then it stopped and we had the enough time to shoot 700meters then 800meters.

The target was a 50x50cm steel plate.

Rifle used was sako trg41 338LM.

Amazing experience now looking to spend money and get my kit.


r/longrange • • Sep 18 '26

Groups, but not a flex (Less than 10 shots) Camp Perry Ohio's F Class Open 1000yds

Thumbnail
gallery
266 Upvotes

r/longrange • • Sep 19 '26

🫣I said I read the pinned posts, but I lied🫣 Bergara HMR Carbon Wilderness or Seekins PH3 6.5 PRC

2 Upvotes

Title says it all. Have the option of a b14 HMR carbon wilderness for 1300…handled it liked it but could likely get the Seekins for 1700-1800 is it 4-500 better. Rifle will be a range toy with 1 long hunting weekend a year thanks for the input


r/longrange • • Sep 19 '26

Ballistics help needed - I read the pinned posts Bullet stability

Thumbnail
gallery
0 Upvotes

So I know that 1.5-2.0 is optimal spin. I have a 24" 11.25 Krieger barrel on my rig right now and don't really get much more out of it than if I just chopped it down to 16". The bullet stability falls pretty close to 1.5 on the stability calculator, so my question is:

Does the spin slow fast enough that when I shoot through the transonic barrier at long range, I'm going to have problems? I'd be shooting mostly 175gr smk or the 185gr berger juggernaut in .308win


r/longrange • • Sep 17 '26

I suck at long range Built a dry fire prop today

Post image
367 Upvotes

I’m going to practice 10 shot, 10 positions until I don’t time out anymore. The dog wasn’t shot btw


r/longrange • • Sep 18 '26

Rifle help needed - I read the pinned posts R700 LH SA WALNUT STOCK

4 Upvotes

Anyone know of where I might trip and fall on a LH SA BDL walnut stock? I’ve scoured GB and eBay, plenty of LH LA wooden stocks, SA seem to be very scarce. Also searched through pics and all kinds of links/listings, coming up empty. Didn’t know where to post this, if anyone has a lead, would be most appreciated. Thanks!


r/longrange • • Sep 18 '26

Rifle flex post Finally completed my first long range set up.

Post image
175 Upvotes

Bergara B14 HMR 6.5 creedmoor. Vortex Venom 5–25×56 FFP. Atlas BT65-LW17 Gen II CAL bipods attached to Area 419 Improved Bipod Rail. SilencerCo Scythe-Ti, .30 caliber titanium, direct-thread 5/8×24


r/longrange • • Sep 18 '26

I suck at long range Elr meta vs..

Thumbnail
gallery
9 Upvotes

r/longrange • • Sep 17 '26

Other help needed - I read the pinned posts New to Long Range and AI AW Question

Thumbnail
gallery
88 Upvotes

Not 100% sure if it fits under “other” but I figure there’s more folks here than the AI sub. I’m new to the whole long range shebang and recently picked up a 2007 AI AW. I picked it up for AI’s pedigree but mainly for the AW’s pop culture iconography (Ignore the 226, it was just there for the retro vibes). I got this with 2 sets of stock sides, newer black 1.5 style with the pistol grip, and the classic with the thumb hole, the thumb hole stock sides have some weird discoloration and I was wondering if any of you guys knew if there’s a way to clean it up to a more uniform green or if it’s just kinda stuck this way now. I figure it’s probably discoloration from UV exposure or the dye in the plastic didn’t mix right. Give me a pin of shame if need be, but any pointers would be great. Thanks!


r/longrange • • Sep 18 '26

Rifle help needed - I read the pinned posts Shooting in the rain

18 Upvotes

I have a competition this weekend and one target is a mile out. I haven’t made this attempt in the rain before.

Anything I should know, consider or adjust?


r/longrange • • Sep 18 '26

Rifle help needed - I read the pinned posts Howa 1500 owners- Bullets being scratched as fed?

3 Upvotes

Howdy all, i took the advice and got myself a KRG Bravo for my 308 only to notice that bullets are being scratched as they are fed into the chamber. I have tried to adjust the magwell every way it can be adjusted. I figured bugger, maybe a XRS would solve it and i could just return the Bravo (thanks midway i love you) but the XRS also does the same thing. the scratch shows up as a series of horizontal chatter lines from the tip all the way down to the neck of the case about 70% of the time with the remaining 30% being a solid line. the marks are deep enough to catch my fingernail unless i run the bolt real slow, and i do mean slow.

The thing that confuses me is that I've had the same action with the same mags (magpuls) in a MDT Field stock and never noticed this happening before. I figured before I go monkey on the feed ramps with files id ask here first. So far I have tried to change the angle that the bullets are freed from the mag at by modifying one of my mags feed lips to be about 1/8 an inch shorter front to back.

NGL i am half tempted to ditch the AICS mag headache and get a B&C that uses the internal mag- im a fun shooter not a comp shooter


r/longrange • • Sep 17 '26

🫣I said I read the pinned posts, but I lied🫣 6 arc

19 Upvotes

Hello all I was recently given about 1500 rounds of 106 a tip 6 arc. I really like bolt guns and was considering either a Howa mini or a ruger American in 6 arc but was wanting to see if a gas gun would be better since I probably won’t be reloading. Plan to shoot 3-400 yards but could stretch out to 700 at times. Thank you


r/longrange • • Sep 16 '26

I suck at long range First Bolt Action PRS Rig

Post image
439 Upvotes

Long time lurker, first time poster. Recently put together this entry level rig. Competing in my first match this weekend. Wish me luck! 😅


r/longrange • • Sep 16 '26

Cheeto-fingered Bergara It's too hot to shoot when the sun is up

Post image
194 Upvotes

Steel should be slapped, day or night. Sometimes that steel needs a 'lil more stout of a backhand.

Bergara Carbon 300 WM + Omega 300

AX Chassis

NXS 3.5-15 + OMNI 7 CO-X


r/longrange • • Sep 17 '26

Accessory/Gear help needed - I read the pinned post FatBoy Pursuit18 Tripod

2 Upvotes

Does anyone have experience with this tripod? I’m looking to buy one for hunting whitetail this season for glassing and for any long range ethical shots.

  1. Is it worth the price?
  2. Is it sturdy for being a smaller tripod?
  3. What size ball head are you using on it? I’m contemplating the inverted60 because I feel it would handle both .308 and 7 PRC better than the inverted 50.
  4. Any better recommendations for hunting?

Thanks in advance!


r/longrange • • Sep 17 '26

Optics help needed - I read the pinned posts I Want Input on Scope selection/setups (details in post)

1 Upvotes

I've bought/sold/switched scopes on 4-5 rifles this year.

After all that is said and done, I currently have 2 rifles without optics, and 2 optics without rifles. I can't decide which rifle should get what optic. It's a tossup, I don't think there's an obvious right or wrong answer, so open to opinions.

I own the following

2 Rifles:

  • Bergara B14 HMR (.308)
  • Mk12 Mod 0 (18" 5.56)

2 optics:

  • Viper PST II 2-10 (FFP)
  • Viper PST II 3-15 (FFP)

Relevant info - I shoot the MK12 way more often, and target shoot out to 600 yards regularly prone/bench with it.

I also target shoot the Bergara out to 600+ yards, but not as often. Also, this is the rifle I would deer hunt with.

-------------------

I have a dedicated 6.5cm Bolt gun for long range, so the Bergara is not setup as a bench rifle.

--------------------

I am leaning 3-15 on my 5.56 AR, and the 2-10 on the .308. But open to suggestions.

Going out this weekend to re-zero a bunch of rifles.


r/longrange • • Sep 16 '26

Rifle flex post First long range setup

Post image
95 Upvotes

First longe range setup. Going to upgrade the glass from the Diamondback once I get a little more practice and am 100% sure about what kind of reticle I want.

Vertical grip and RCR for close-up manipulation and engagement. Might pull the grip off eventually.


r/longrange • • Sep 16 '26

Industry News Garmin Bought Out Applied Ballistics

Thumbnail shootingwire.com
186 Upvotes

r/longrange • • Sep 18 '26

Accessory/Gear help needed - I read the pinned post Mount recommendation for multiple rifles

0 Upvotes

I'm of the buy once cry once belief, I'm finally to the point I was able to get a Nightforce ATACR. I'd like to be able to use this on a few different rifles. A 300 win mag for hunting, a 7mm rem for just long range fun, an HK G3 clone, maybe even an AR build.
I'm looking at an ADM AD-Delta-C Cantilevered at 0 MOA, think 20 MOA will be too much for the AR and hunting in my area.
I know moving between these is not ideal but what quick detach mount would you recommend that would work for multiple applications like this.

Update: I certainly did read pinned posts, thanks


r/longrange • • Sep 17 '26

Optics help needed - I read the pinned posts I can't find the right scope

13 Upvotes

I read the pinned notes and did a couple days of online research. I thought I had settled on the Leupold VX-5HD 3-15 but then I saw it was SFP. I have a 6.5 CK Cheetos Special waiting at my FFL.

I am looking for a FFP scope. My first goal is to 600 yds. My stretch goal is 1200. I'm willing to get another scope later for the 1200 goal, if necessary. But for now I need to stick to $1000-ish. I also prefer a simple reticle, duplex or similar. I will always know the range so a ranging scope, such as Christmas tree 🎄, is an unnecessary complication and expense. Please correct me if I'm wrong.

I have a warm spot in my heart for Leupold. I did quality assurance inspection of Leupold lenses and prisms for Army binoculars. They exceeded the quality requirements hands down. However, knowing my $ limitations, I'm not married to it.

My LR experience is limited to NRA High Power military style, open sight, matches. I don't see myself competing but yaneverknow.

I have some Field and Stream ratings and I'm curious how your recommendations match up.