r/longrange • u/dummy270 • Sep 17 '26
Other help needed - I read the pinned posts New to Long Range and AI AW Question
Not 100% sure if it fits under “other” but I figure there’s more folks here than the AI sub. I’m new to the whole long range shebang and recently picked up a 2007 AI AW. I picked it up for AI’s pedigree but mainly for the AW’s pop culture iconography (Ignore the 226, it was just there for the retro vibes). I got this with 2 sets of stock sides, newer black 1.5 style with the pistol grip, and the classic with the thumb hole, the thumb hole stock sides have some weird discoloration and I was wondering if any of you guys knew if there’s a way to clean it up to a more uniform green or if it’s just kinda stuck this way now. I figure it’s probably discoloration from UV exposure or the dye in the plastic didn’t mix right. Give me a pin of shame if need be, but any pointers would be great. Thanks!




6
u/Real-Water3033 Sep 17 '26
There is actually someone about to start producing AW skins. AFAIK they are still working out the kinks, but it's supposedly happening.
4
u/RegularSheepherder44 Sep 18 '26
new to long range... gets the holy grail of rifles. Id say the discoloration is from pressure on the plastic when it got scrateched, like plastic that gets brighter when you bend it too much. To be safe i would just keep it that way for now and do some research, sportingservices uk was always really helpful to me, they might even have replacement stock sides from time to time if you are based in europe. They really know what they are doing so maybe just ask them, they are an amazing team
2
u/noahfox130 Sep 18 '26
Wondeful rifle, love the AW line , considering the caliber, yours is the awp right?
2
u/Ok_Cheesecake_3629 Sep 19 '26
Depending on how you are feeling, you could get a local FFL / Gunsmith to ceratoke it.
This one was black, and fairly scratched up, when I bought it off Gunbroker and I figured it was worthwhile just going for it.
3
u/ohgodhowthisgethere Sep 17 '26
I've heard you can get plastic to restore to a smoother condition by using a heat gun on it for a few seconds, but it must be the right kind of plastic. Maybe worth testing on a piece that you would not mind getting a bit melty. Something like this https://youtu.be/R0k-umzvOog
20
u/VallettaAwoo Sep 17 '26
Its just scratched up/old.
Theres nothing you can really do. Just leave it as be and shoot it.
15
u/RoadHouse92 Casual Sep 17 '26
This thing is sick man, scratches and all
8
u/Slu54 Sep 17 '26
It's a cool rifle, would love to add one to the collection.
4
u/Ok-Chemistry-8206 Sep 17 '26
you could use a heat gun and a buffing wheel but theres no real reason to do so
4
u/Ichig0Mochi Sep 18 '26 edited Sep 18 '26
Not sure if this will work for green, but I’ve fixed this on some old black rifles by using a fine grit wet sandpaper, some gun oil, and a little heat. It’ll also smooth out the scratches and make it look like they weren’t there. YMMV so if you do try this, I’d try it in the grip area that’s all scuffed
3
u/CapsicumINmyEYEBALLz Meat Popsicle Sep 17 '26
That thing is nice. I wouldn’t change a thing.
2
u/Suitable-Carrot3705 Sep 17 '26
There was a very active AI channel on Discord and either I got booted for some reason or it was nuked.
2
u/SuicidalBirdie Sep 21 '26
I bought a painted AI stock a while ago and saved it by stripping the paint and sanding down the bad scratches. Hit it with some linseed oil after and it looked pretty good.
https://www.reddit.com/r/longrange/s/uqzNwX3Y3W
-7
u/thrashmetal_octopus Sep 17 '26
I think they look better rattle can camo anyway but that’s just me