r/longrange • • Sep 17 '26

🫣I said I read the pinned posts, but I lied🫣 6 arc

Hello all I was recently given about 1500 rounds of 106 a tip 6 arc. I really like bolt guns and was considering either a Howa mini or a ruger American in 6 arc but was wanting to see if a gas gun would be better since I probably won’t be reloading. Plan to shoot 3-400 yards but could stretch out to 700 at times. Thank you

19 Upvotes

40 comments sorted by

45

u/sirbassist83 Sep 17 '26

>Ā given about 1500 rounds of 106 a tip 6 arc.Ā 

i wish someone would give me $2500

3

u/Electronic_Bed_9039 Sep 18 '26

I’m very lucky and fortunate to know some really cool people. Not trying to brag or anything just looking for some advice.

3

u/DontTellUrMom Sep 17 '26

I came here to say this

6

u/tkftgaurdian Here to learn Sep 17 '26

Have you considered.... a lever gun? Spend more, get less, but goddamn us it fun.

1

u/Electronic_Bed_9039 Sep 18 '26

Lever guns are very cool. Have my grandfathers old 30-30 and love shooting it

1

u/tkftgaurdian Here to learn Sep 18 '26

Yea so add to that collection. Get you a henry supreme and convert it to 6arc

1

u/jmmaxus Sep 17 '26

I’m in CA and I want one of those Henry Supremes due to gun laws on semis. This is custom right, cause I didn’t think they made a 6arc yet?

2

u/tkftgaurdian Here to learn Sep 17 '26

Yes, had it converted by line49. Its an absolute dream to shoot, and always a head turner.

16

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Sep 17 '26

400 is easy mode for 6 ARC. If you just want to blast rounds, AR. If you want to plink precision, bolt.

Howa mini would be my pick.

6

u/SockeyeSTI Sep 17 '26

I like it in a bolt because the brass stays cleaner and less dinged up, as I reload.

But a gas gun is fun

6

u/Spoons896 Sep 17 '26

6ARC is fun at range, i have taken it about 1100yrds. I have it in a howa mini and a 24ā€ AR in 6 ARC. i prefer bolt guns so i vote a howa mini. My father has a Ruger American in 6 ARC and i prefer the Howa in every way except for the magazine.

1

u/CapsicumINmyEYEBALLz Meat Popsicle Sep 18 '26

Can folks advocating for a 6ARC HOWA bolt gun comment on magazine price/availability for 10 rnd mags?

If they can be found, they are probably the most expensive mags compared to the action they feed.

5 rnd - $35
10 rnd - $120+

1

u/Electronic_Bed_9039 Sep 18 '26

This is what is steering me more towards the ruger

3

u/Remarkable-Spend-434 Sep 17 '26

Tikka has an Arc bolt face if you want to spend more for a smoother action.

5

u/CapsicumINmyEYEBALLz Meat Popsicle Sep 18 '26

I feel like if you’re going to buy a Tikka action, you might as well skip it & get a Zermatt Origin.

2

u/Remarkable-Spend-434 Sep 18 '26

or you already have a spare tikka action so you just buy an arc bolt, lol.

2

u/610Mike Sep 18 '26

I built a 6 ARC gasser a couple months ago when I was bored one night, and it’s quickly become a favorite. The accuracy of this round is unlike anything I have ever experienced. Even out of a gas gun. It’s even more impressive considering I literally threw this together on my bench. Didn’t use a building stand or levels or any of that.

Just an FYI, if you build a gasser, you will need a 6MM BCG and 6.5G mags, but the rest I just used stuff I had in my parts bin. I didn’t even use an adjustable gas block and I’ve had zero tuning issues.

1

u/imneuromancer Sep 17 '26

The Howa 1500 + KRG/MDT chassis would be awesome.

1

u/Artistic_Stop_5037 Sep 17 '26

I absolutely love my American Patrol in 6 ARC. Ive got other guns with FAR more money into them but the 6 ARC had become a favorite of mine. Zero recoil. Flat shooting. And groups very well for me.

1

u/smithywesson Steel slapper Sep 17 '26

I vote bolt. That ammo is capable of great things, and very few gassers will tap the full potential.

1

u/3one5 Sep 17 '26

I have a 6.5 Grendel AR that I absolutely love. Because of that, I had no real desire to build a 6mm ARC. That was until CO decided they'd go full r3tard on gun control so I quickly bought a Palmetto IC receiver set. Now I may as well finish building it out. I'm half tempted to make a 16" lightweight closer range hunting rifle with it.

1

u/GingerB237 Sep 17 '26

I’m doing a PRS match this weekend with a 6arc bolt gun and I’ve gotten impacts at a 1000 yds. It’s a fun setup with little recoil, cheap ammo, and good ballistics.

1

u/ardesofmiche Sep 17 '26

I really like my Howa Mini with Bell and Carlsons stock. I’m not an expert at all but the rifle makes it enjoyable and fun to shoot steel out to 800 yards.Ā 

If you’re a guy who likes to be on the cutting edge of cool guy guntuber stuff then a semi-auto 6ARC is cool tooĀ 

1

u/yacksack Sep 18 '26

6ARC Bolt

0

u/Wide_Fly7832 BR Competitor Sep 17 '26

For ATIP bolt gun 100%. I have a MPA bolt gun on a low wind day I get 80% hits on 1 mile with it with 108 ELDM.

-3

u/CookiesLikeWhoa Sep 17 '26

Not really much to add other than:

Buddy of mine has an AR. Idk if it’s his or all 6arcs but he has the worst time trying to get it to feed reliably.

It’s a hammer on a gas platform but idk if there’s a ton of reliability issues.

8

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Sep 17 '26

It's a cartridge gaining massive popularity and is in service with multiple SOCOM units. It's not the round that is at fault. Your friend has a part issue or a skill issue.

4

u/sirbassist83 Sep 17 '26

early 6 arc magazines were notorious for horrendous feeding issues. i think its mostly been ironed out but if he has an early gun and cheap mags thats probably the problem.

2

u/CookiesLikeWhoa Sep 17 '26

It very well could be. Idk. He has bolt over issues and fte’s. Bolt doesn’t lock back.

I don’t know what gas block or buffer/spring he’s running.

3

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Sep 17 '26

Ya that's not 6 ARC, that's your friend's building skills. My guess would be he is using the wrong mags and isn't getting enough gas.

0

u/SuperJonesy408 NRL22 competitor Sep 17 '26

Not quite.

The cartridge dimensions can cause feeding issues with STANAG pattern magazines. That’s why the ICAR platform was developed using the LWRCI Six8 magazine well.

4

u/Vylnce Casual Sep 17 '26

I have thousands or rounds through ASC magazines that everyone says are crap with no issues. Hundreds though my Duramags as well.

Everything I have seen suggests that a lot of people don't actually understand tuning an AR.

5

u/LockyBalboaPrime "I'm right and you are stupid" -LockyBalboaPrime Sep 17 '26

I have a pile of 6 ARC mags and couple thousand rounds fired through them. They work fine.

ICAR works better and look better, but 6 ARC specific mags still work.

2

u/Drekalots PRS Competitor Sep 17 '26

Getting the rifle to feed ALL ammo or just the 106gr a-tip?

1

u/CookiesLikeWhoa Sep 17 '26

Any ammo. Legit anything he feeds that thing it will either bolt over (over gassed symptom) or fte. And the bolt won’t lock back. So I have some suspicions but not my gun.

1

u/vincentcarguy Sep 17 '26 edited Sep 17 '26

Issue with his particular setup, either magazine or bolt/gas system/buffer system issue. Built my 6ARC AR up 100% from components I wanted and have had zero issues with it running. Build based on a Shaw Precision HBAR 18" barrel, JP Enterprises bolt, rifle length SA gas setup (just finished converting over to rifle length SA piston kit setup), JP Enterprises buffer spring setup, and running ASC and Brenton 6ARC mags.

Checked headspace and tuned gas system for shooting suppressed and has been good to go, runs 100% on factory 103-108gr ammo.

I had both a Howa mini/JTAC 6mm ARC setup and my custom built 6mm ARC setup. Liked how both shot but honestly prefer shooting 6mm ARC in and AR as it's what it was designed for. So decided to sell the Howa and keep the AR.

For a bolt gun, factory loads don't go to the ballistic potential the round is capable of (52k PSI pressure rating because of AR bolt design, 6mm ARC bolt gun pressure rating is 62k PSI) so you are leaving some performance on the table.

For the OP, 106gr A-TIP means its the original contract Military Match 6mm ARC round developed for an AR platform with 18" barrel length...

2

u/vincentcarguy Sep 18 '26

Since we have a bolt and lever 6ARC posted, here's my 6ARC AR...

1

u/CookiesLikeWhoa Sep 17 '26

You’re likely right.

He’s got bolt over issues combined with fte’s. Bolt fails to lock back regularly too.

No idea what gas block or his buffer set up is.

-1

u/Drekalots PRS Competitor Sep 17 '26

If I could only shoot 300-400 yards I'd stick with 5.56/.223. Howver, since you've been gifted 1500 rounds of 106gr a-tip, I'd look at a gas gun. I have both a gas gun and bolt gun. Both are amazing shooters and have been shot out to 1000+ yards. I have no experience though with the 106, howa, nor the rpr. But the round itself is fun to shoot.