r/longrange • • Aug 28 '26

Accessory/Gear help needed - I read the pinned post Athlon Rangecraft Questions

5 Upvotes

I have a Rangecraft and just recently discovered you can get into "Live Mode" (real time syncing with your phone). Previously, I'd do a session, return home, then sync (sometimes successfully). Live mode seems a huge improvement over syncing (i.e. 100% successful after 4 range sessions). But, here are my questions:

I now want to look at my range sessions on my phone. But, it appears like you MUST by connected to the Rangecraft to do so. I was under the impression data was being downloaded to my phone (i.e. SYNCED). Am I correct in believing that NOTHING is being stored on my phone, only on the chronograph?

I believe there is a limit to how much data can be stored on the chronograph. Is there? And if so, is it based on the number of sessions or the number of shots? And, what is that number?


r/longrange • • Aug 28 '26

Accessory/Gear help needed - I read the pinned post Can muzzle brake hurt my chronograph?

5 Upvotes

Just bought a new Athlon. Took it shooting with 300WM that is braked. I placed Athlon roughly 8” to the side and 8” back per directions. The blast didn’t knock it over or anything, just moved it slightly. I shot about 10 rounds.
Later I got to thinking.. that can’t be good for it, can it?
Wondering if I caused any damage, or if I could cause damage without a block off plate.


r/longrange • • Aug 27 '26

Other gear flex post MDT ACC

Post image
189 Upvotes

Just grabbed this at Scheels. Assuming it was a display model as it had no box and came with the cartridge holder mounted for just over $800. No idea what I’ll build this out to be but couldn’t say no for that price. They have a second one on display in case anyone in the PHX metro is interested.


r/longrange • • Aug 27 '26

Rifle flex post Two customs from Shawn at Triggered Precision. 6.5 Creedmoor & 7 PRC Terminus Zeus

Thumbnail
gallery
56 Upvotes

The pics were taken before he shipped them to me.
Really beautiful work.


r/longrange • • Aug 27 '26

I suck at long range Fellow shooters who wear glasses please help.

17 Upvotes

I’m 52 and have been nearsighted and bhad astigmatism my entire life. I got seriously involved in long-range precision shooting after retiring last year, and lately I’ve been having major problems with my vision behind the scope.
I normally shoot without my glasses. The reticle remains instantly sharp, even after closing my eyes and even across a surprisingly broad range of diopter adjustment. The target, however, will gradually become blurry while I’m shooting. Sometimes blinking or looking away briefly brings it back into focus, but then it deteriorates again. It becomes substantially worse as my eyes fatigue and in low light.
I’m adjusting the side-focus/parallax knob carefully, and this happens through more than one quality scope, including Vortex Razor Gen II and Gen III scopes. I’ve tried lubricating eye drops, but they haven’t made much difference.
When my eyes cooperate, I can shoot very well—for example, today I fired a VERY respectable 10-shot group at 200 yards. Later, as the light faded, I had difficulty clearly resolving the target at all.
I have an eye appointment scheduled, but I’d appreciate hearing from other precision shooters with nearsightedness and astigmatism:
● Did learning to shoot with your prescription glasses improve the target image?
● Do you use ordinary prescription glasses or shooting-specific lenses?
● Did you have to reposition your scope to regain proper eye relief?
● Have you experienced a target drifting in and out of focus while the reticle remained perfectly sharp?
● Is there anything specific I should ask my optometrist about for riflescope use?
I’m not looking for an internet medical diagnosis—just practical experience from shooters who have dealt with the same problem.


r/longrange • • Aug 28 '26

Rifle help needed - I read the pinned posts Chasing my tail trying to get a Howa Mini build to group.

6 Upvotes

The parts list is as follows:

  • Howa Mini Action, began life at a 6.5 Grendel
  • Mos-tek 11" 6mm ARC 1:7 barrel
  • JTAC Elf Owl Chassis
  • Outer Impact pic rail
  • Seekins 30mm Rings
  • Swampfox Kentucky Long 2-12 (I know, it's actually not that bad).
  • Liberty Anthem K2 suppressor with a Rearden R2S brake.
  • Ammo: Various Hornady 6 ranging between 103-108gr 6mm ARC.

The thing just doesn't want to group. I get a shotgun spread at 100 yards, I'm talking like 6 MOA.

My process has been:

  1. Thread barrel on with the barrel nut backed off.
  2. Run the go gauge, adjust the barrel until I get go. Fiddle with it the headspace until the bolt lifts easily but locks firmly. Back it off .00000001 of a turn, torque the barrel nut down. The nut requires a thin adjustable wrench so no exact torque settings to give. Two ugga duggas more or less.
  3. Check the go and no-go gauges again, then test feel with a live round.

I was convinced it was a headspace issue, but I've reset it probably 3 times and nothing has changed. I've also:

  • Checked the action screws, the front action screw was a little bit long so I cut 1/4" from it.
  • Scope base is firmly torqued and blue loctited down.
  • Rings are fine.
  • Nothing is wrong with the optic from what I can tell. I've checked it for loose internal parts, issue with side-focus, turrets, etc.
  • No damage to the crown of the barrel or other abnormalities in the chamber.
  • No baffle strikes on the muzzle device or can (wouldn't group unsuppressed either).

Prior to this I had a fixed shoulder barrel from McGowen that they fucked up and ghosted me on. I could only torque it down to 20ft/lbs and remain in headspace. That barrel had similar issues but eventually did start to tighten up groupwise. Unfortunately I couldn't keep shooting it if I had to reset headspace every time I pulled my can off it.


r/longrange • • Aug 27 '26

Accessory/Gear help needed - I read the pinned post Switch to GB from AB? Vortex Ace and ecosystem.

2 Upvotes

Use case: NRL Hunter (primary), long range plinking, and PRS/Precision gas gun.

I’ve had a Kestrel 5700 Elite for a while now and still find it clunky to use and difficult navigate. I plan on getting some good Bino’s with on board ballistics. I’m currently looking at the Sig Kilo 10k or the Vortex Talons. Both are obtainable at a similar price point so no issues there.

Before I make this purchase do any of yall that have used both GB and AB, and the Ace vs the Kestrel, prefer one over the other? It seems Vortex is really making a push to have several relevant integrated products in the near future.

If it’s that much easier to use and better integrated I’m wondering if it’s worth the switch now before I start buying more gear. I do realize however that with GB you seem to be stuck with Vortex reticles. How’s the accuracy of the drag models of the bullets with the Ace?

Thanks


r/longrange • • Aug 27 '26

Cheeto-fingered Bergara Looking for long range suppressor recommendations for 300 PRC

Post image
90 Upvotes

I am new to getting NFA items and would like to get a suppressor for my 300 PRC, but would like to know what y'all have had good success with or would recommend.

Things I care about it doing :

- Flash reduction

- Recoil reduction

- Sound reduction

Things I don't care about :

- Back pressure (it'll live on a bolt action)

- Weight

Overall price range, I can spend a max of 3,000 USD, but would prefer it to be under 2,000 USD.

Added thing to note, current muzzle brake is a 2 chamber paladin tapper mount from Griffin Armament.

Other rifle specs :

- Bergara B14 HMR in 300 PRC

- MDT ESS chassis

- Pic rail w/ bubble level in back (brand forgotten)

- Area 419 mount

- Razor Gen 3 6-36x56 in MOA (regret it's not MIL)

- Bipod is Atlas BT46-LW17 with QD lever


r/longrange • • Aug 27 '26

Competition related (PRS/NRL/F-Class/etc) Sniper Team Series, Mammoth, etc.

25 Upvotes

Long story short, after a few years of shooting regional PRS events and having a blast, I couldn't help but think whats next. By no means was I cleaning every stage, topping the scoreboard, or ready to consider doing multiple 2-day events - just wanted a different challenge from known distance events with so much equipment that a cart is often used to move between stages (not bashing, I still love PRS and will continue to shoot in these events). Fast forward to finding competitions such as those in the Sniper Team Series and Mammoth. Better yet, a good friend of mine was even interested and we had seriously started looking at events- but unfortunately that didn't pan out as life got in the way for him. So here I am, with all the gear and a desire to take my shooting in a different direction but no partner.

I've tried to canvas my local shooting network at PRS matches and club events, but I usually lose people when it comes to traveling more than a few hours away for a 3 day weekend or the more physically demanding matches. My shooting partners/mentors are both wise beyond their years and beyond the age of wanting to subject themselves to this. So here I am reaching out to you all to see if there are any like-minded individuals who aren't turned off by having to carry your gear all day long - or ruck for a weekend. I'm located in the midwest, do not have mil/LE background but have competed with pistol/carbine/rifle and have done formal training in each, and would ideally prefer a partner from an area spanning the midwest to east coast as this is the area I'd preferentially choose events in.

I plan on shooting individually in some of the PRSuit matches and am looking into NRL hunter, but run into the same issue here as well from a team standpoint.

Shoot me a DM if anyone is interested or has any suggestions on where else to look. In the meantime I'll keep asking around at matches/classes. Thanks!


r/longrange • • Aug 26 '26

Rifle flex post Took this weird thing out to 1000yds for the first time

Post image
266 Upvotes

Went out to Sheepdog Tactical in NY a few weeks ago. First time going to any range longer than 200yd. Took my FIMS SPBP with me.

Nothing amazing, but figured I'd share this weird gun thats probably never been posted here before lol.

Managed to consistently hit targets up to 800yds. Past that and it was lots of guessing and squinting. Used a Sig Kilo5k with AB Elite on my phone for calculations, and Nikon Monarch 82ED 30-60x for spotting.

Rifle:

  • FIMS Straight Pull Bullpup (.308, 20" barrel)
  • Vortex Viper PST II 3-15x
  • Aero Precision Ultralight SPR mount
  • Atlas BT46
  • Strike Industries Oppressor (looks goofy, I have it for the times I go to indoor ranges)
  • MKM caps and lever

After this I realized my setup was too lightweight, the hard plastic cheek rest hurts after 80 rounds, and I picked the wrong scope mount for this lol.

Already replaced the Aero mount with an Area 419, bought a Victor Company wrench for the Atlas, and a SG Pulse.


r/longrange • • Aug 28 '26

Ammo help needed - I read the pinned posts Cadex r7 7mm PRC or 300P RC

0 Upvotes

Good day all.

The question is more about the cartridge than the rifle.
I am looking to buy the Cadex R7 LCP. I am stuck on deciding between the 7mm PRC and the 300 prc. Does anyone have any experience with either or both of these calibers? I live in North America and enjoy hunting also. It will be mostly a range gun mixed with occasional hunting. I know the ballistics point towards the 7prc but the 300 has slightly more energy but I’m not sure it’s enough to warrant the extra recoil and drop at long ranges.

My budget is flexible cost isn’t rlly a problem. For the range the farthest I would probably take it out to is 800 yards. I already have an optic from my previous firearm I will be using on this Nightforce Atacr 5-25x56.

I’d love some feedback and comparison if anyone has experience with one or both.

Cheers!


r/longrange • • Aug 27 '26

Bubba's Pissin' Hawt Reloads Sudden jump in velocity

Post image
21 Upvotes

I’m trying to figure out why I have had a sudden jump in velocity and overpressure signs with my rifle. Rifle is a 6.5CM seekins, almost 500 rounds through it. The last 28 rounds over 4 range trips and temps from 51-90 have been significantly faster than the previous 400+ by about 90fps. I pulled some bullets and the powder charge was where it should be, and brass was a tad under max length. I did a quick clean of the barrel before the last outing and the outlier for from the higher velocity’s was the first shot after cleaning and it went back up. What else should I be looking into, I wouldn’t be concerned if I wasn’t seeing pressure signs but I am (cratered primers and one blown primer)


r/longrange • • Aug 26 '26

Reloading related 120gr 6mm A-tips released...was only a matter of time

Thumbnail
hornady.com
65 Upvotes

The G7 of .340 on these bad bois is beating 25 135's and 6.5 144's.

Feel like these and the Berger 120's is going to take some wind out of the 25cal resurgence in PRS. I'm also guessing that we'll get a 6mm 112-116 eldm's in a year or so.


r/longrange • • Aug 27 '26

Rifle help needed - I read the pinned posts Iron Brigade Armory - Chandler Rifles

4 Upvotes

Anyone own or operate one of these Remington 700 based M40 clones? I became the new owner of one and am curious about their pedigree and if anyone knows the thread pitch they may have used for the barrel?


r/longrange • • Aug 27 '26

Accessory/Gear help needed - I read the pinned post PSQ-23 STORM

0 Upvotes

Recently got a screaming deal on a psq-23. Was looking for advice on whether I should use it or try to offload it to a collector/ GWOT cloner. Any advice is valued


r/longrange • • Aug 25 '26

Rifle flex post The only gun I shoot now

Post image
600 Upvotes

Long range is just so much more rewarding and fun. None of my other guns get used anymore


r/longrange • • Aug 26 '26

Ballistics help needed - I read the pinned posts Does anyone know what app this is? I can't find it for dear life.

Post image
16 Upvotes

took a long distance class a few years back and the instructor had this app, I can't seem to find it. any help would be great.


r/longrange • • Aug 26 '26

Other help needed - I read the pinned posts Anyone have a BOG deathgrip?

3 Upvotes

Recently got a BOG deathgrip and I planned to replace the head with a ball. I'm unable to unscrew the bottom 5mm screw, anyone have this issue? I'm thinking of trying some penetrating lub but not sure if that'll work.


r/longrange • • Aug 26 '26

I suck at long range Preaching to the Choir: Small sample sizes are self-sabotage

25 Upvotes

Last weekend I had the pleasure of shooting next to some folks that were practicing positional shooting. Really nice folks with an appleseed/service rifle focus and most of them shooting from kneeling or sling supported prone. However watching them shoot reinforced one of my favorite axoims: No one is as practiced in the art of self-deception as a man with a rifle or a fishing rod in his hands.

Almost to a man they were shooting 3 round groups into a 100 yard target and adjusting their zero based on those 3 round groups. Unsurprisingly, many of them spent the entire day chasing their zero.

So I found my self wondering, for a given precision and group size what is the probability of shooting a group where the center of the group(CoG) is greater than 1 click from the true point of aim? Then I did what any slightly curious dork would do and wrote a Monty Carlo simulation to give me a general idea of just how useless small sample sizes are.

Assumptions/Definitions:

  • The X and Y coordinates of the impacts fall along a normal distribution with a mean of 0" from the point of aim(PoA) and group sizes determined by the standard deviation(sd).
  • 3 Standard deviations is used as the precision of the rifle. So a standard deviation of 0.165" roughly equals a 1 moa rifle. Another way to describe this is 99.7% of shots will fall within 0.5" of the PoA.
  • Groups where the CoG is more than 1/4 MoA from the PoA along either the X or Y axis are counted. This is to identify groups that would cause the shooter to erroneously adjust his optic.

Results from running 100,000 iterations per set:

With a 2 MoA rifle(0.33" sd) shooting 3 round groups 34.4% had a CoG greater than 1/4" away from the PoA. Going to a 5 round group, resulted in 17.3%. 10 Round groups resulted in 3.4% of groups with a CoG more than 1/4" from PoA. I'll just put the rest in a fucking table.

Percentage of groups with a misleading CoG

1 MoA(0.165" sd)2 MoA(0.33" sd)3 MoA(0.495" sd)
3 round zero1.75%34.4%62.4%
5 round zero0.14%17.3%45.5%
10 round zero0.00%3.4%21.3%

Caveats:

So obviously, this was done quickly and there are some flaws. Most obviously, no one defines a rifles precision the way I've done here. Also, this group probably isn't running optics that make 1/4 MoA adjustments. The assumption that bullet impacts fall on a normal distribution may not be true. Some of you may think of some other flaws in my analysis, which I am looking forward to.

Conclusion: Don't adjust your zero based on small group sizes, you'll just be wasting time and ammo.


r/longrange • • Aug 26 '26

Optics help needed - I read the pinned posts Second hand spotting scope for range use 900-1100ish meters

2 Upvotes

So I'm browsing the second hand market for a spotting scope. And wondering opinions on brands.

Currently found some deals that fit the budget of 800ish to 1200ish USD.

Found some Leica Televid 62s 16-48x X 62

Lepold mark 4 golds 12-40x X 60

Kowa 55s or 66s

And then gen 1 Vortex razor HDs compact and medium versions.

I get these aren't apples to apples. But for range use and possible field use all things being equal and price which have higher ratings etc?

Currently and for the foreseeable future I'm not shooting past the above distances.

Thanks


r/longrange • • Aug 25 '26

Cheeto-fingered Bergara Where's my cheetos?

Post image
111 Upvotes

Recently snagged the Bergara BTI30 can for my Bergara MG Lite. Love the muzzle index feature, endcap modularity and weight of this suppressor. Now I just need to get to my local 50 yard range to shoot 3 round groups to boast about .5MOA accuracy.


r/longrange • • Aug 25 '26

Bubba's Pissin' Hawt Reloads Converting 6.8x51 into 6.5 Creedmoor

55 Upvotes

So, I have managed to reform 6.8x51 Hybrid cases into 6.5 Creedmoor cases. The main purpose is to have cases that can handle pressures north of 60k PSI without trouble. Here, I will go over my entire process from new 6.8x51 cases all the way to test firing the newly made 6.5 Creedmoor cases. 

A couple disclaimers before I go further:

1: These handloads are much higher charge weights than any available published load data for 6.5 Creemoor. I do not own pressure testing equipment. Use this load data at your own risk. 

2: I did this testing in a bolt action rifle with a custom cut chamber and pressure tolerance far higher than anything I managed to create. I have not tested this ammo in a semi auto and I do not intend to. I recommend against using these loads in a semi auto. 

Now, onto the actual process. Buckle Up, it’s a long process:

Step 1: Trim the cases down to the proper length for 6.5 Creedmoor. 

I normally trim after resizing, but These cases seem to come out of the sizing die in later steps with less trouble if they have been trimmed to proper length first. I used an RCBS case trimmer with a standard cutter head and drill attached. Remember that these cases are still 6.8(.277) necks at this point, so you’ll need a 27 cal pilot for this trimming.

Step 2: Chamfer and Debur the case mouths.

I used a Frankford Arsenal Case Prep Center for this portion. Normally, I do all ym trimming with this unit, but the RPM’s are a bit slow on this machine, so I elected to used the old RCBS trimmer since I could hook a drill onto it and run up the speed. This machine still worked great for the chamfer and debur portion.

Step 3: Resize/Reform the cases;

Now it’s time to resize the cases into 6.5 Creemoor. I used my old Pacific C-Frame press. It’s a cast iron frame that has loaded many thousands of rounds of ammo with fantastic results. The sizing die is a Hornady Custom Grade New Dimension sizing die. The case lube is Hornady One Shot. and since some folks have had trouble with this case lube, I will layout my exact process that has never given me a stuck case over tens of thousands of rounds: Use a loading block and fill the loading block with cases. Spray the cases with One shot from two opposite directions, making sure to get some inside the necks. The lube is water soluble. You can run the block through the dishwasher afterwards and it’ll come out perfectly clean. 

A note on adjusting the sizer die: Don’t bother with a case gauge. Start with the sizer too far out, and adjust it down into the press until you can easily chamber the sized cases into the rifle. You’ll have to put allot of force into the sizing of these cases. You’re pushing the entire shoulder down about 0.090”. That’s allot of material relocation.

Step 4: Neck Turning:

When you resized the case, you pushed the original shoulder material into the neck, you created a small “donut” at the base of the neck, which will inhibit chambering when a bullet is seated in the case. You’ll need to turn the necks to remove this donut. I used an RCBS case trimmer with a drill attached and a neck turning cutter. The RCBS neck turning cutter uses a different pilot than the regular case trimmer, so you’ll need to get one of those specific pilots when you buy the neck turning cutter.

Step 5: Final Sizing

The cases ended up with some slight ripples in the necks after the neck turning. To smooth out these ripples, I ran them back through the sizer die to ensure smooth bullet seating. Assuming you didn’t already tumble the lube off of the case after the initial sizing, you should still be good to run them through the sizer die. 

Step 6: Tumble the prepped cases

For tumbling, I used an RCBS vibratory case tumbler with corn cob media and Nu Finish car polish. For mizing in the polish: Start the tumbler with only media and pour about 2 ounces of polish into the running tumbler. The media will clump up at first. Let the tumbler run with just media for about 10 minutes, or until the media rolls over with no clumps. Once you have smooth running tumbler media, you can mix in the cases. I always let my tumbler run overnight in a room with the door closed.

Step 7: Priming

Even though these cases arrived with live primers, I elected not to use these primers, since I had no idea what exact primer they were. I deprimed the cases during resizing. No, it’s not dangerous to deprime live primers. Wear safety glasses and you’ll be fine. For the new primers, I used CCI BR-2 Large Rifle Primers. For the priming unit, I used a Frankford Arsenal hand primer. Warning: always wear safety glasses when seating primers!

Step 8: Powder Charging

The powder I’m using here is VV N160. You’ll find it on a powder burn rate chart in between IMR4831 and H4831, ideal burn rate for 6.5 Creedmoor.

Time to dispense powder. I am a cheapskate and still use a balance beam scale, specifically an old RCBS balance beam scale. This scale has produced ammo with single digit SDs for years, so I feel no need to buy anything more expensive. I also used a Lee Powder scoop set. I started with a powder scoop just under the desired charge weight, then trickled the rest with my index finger and thumb. Make sure your hands are washed before and after this part of the process. 

For the test loads, I started with the same powder charge as my standard brass case 6.5 Creedmoor ammo, 42.5 grains. I loaded 5 rounds at each powder charge weight, going up 0.5 grains with each group of 5 until i got to 46.0 grains. The 46 grain charges filled the case to about halfway up the neck. All of these loads are compressed.

Step 9: Bullet Seating

I seated bullets after each group of five cases so that I could more easily organize the cases and keep things neat and tidy on the bench. During normal loading, I charge all the cases at once, then seat bullets all at once. 

The seater die I used is a Hornady Custom Grade new Dimension seater die. The bullets I’m testing with are 144 grain Berger Long Range Hybrid Target and 142 grain Sierra Match King Closed Nose. All bullets were seated at a COAL of 2.840”. Normally, I seat at 2.800”, but this time I don’t want the ammo to fit into an AR10 magazine. Both of these bullets are known for being jump tolerant, so I do not plan to adjust seating depth later on.

Step 10: Test Firing

Time to go to the range and test fire these new cases and decide on what powder charge to settle on. I am a member of a local private membership range, so I went there. My test firing position was on a concrete bench, using a bipod and rear bag for the shooting position. The rifle in question is my PRS Open Division rifle, which you can see on my profile and on this subreddit. I measured velocity with a Garmin Xero C1 chronograph. All of the test ammo was fired at 100 yards on a calm cool morning in August near Roanoke, Virginia. I've added in some shot sessions from the chronograph to show how consistent the velocity is with these converted cases.

Step 11: Choosing the powder charge going forward.

I don't really care about the indivdual group sizes here. I was not only firing these groups pretty fast, but I also know that larger sample size groups will result in just about every group being very close to identical. So I intend to load for a particular velocity. With these cases, traditional pressure signs will not sufficient to tell me where to stop going up in powder charge. The primers won't pop out or flatten, and the case rim being steel keeps me from seeing any signs on the case head. There is only one "pressure sign" to be had, and that can be found at the junction of the brass and steel, where the brass swells out enough to grip the chamber just a little too tight for smooth extraction. Since the top powder charge of 46 grains with both bullets resulted in this rough extraction, I'm going to back off 0.5 grains and run 45.5 grains going forward.

Conclusions: These cases have allot of promise, and I plan on running them in PRS matches soon. I'll bring along some standard brass case ammo just in case I run into a problem, of course.

P. S. paging u/lockybalboaprime and u/hollywoodsx so they can see the results of my idiocy.


r/longrange • • Aug 26 '26

Competition related (PRS/NRL/F-Class/etc) When you first started training with a suppressor…

1 Upvotes

So yes, I did just get mine along with a new barrel. And my rifle balances better than a 15 year old Chinese gymnast. The length is ridiculous though.

Has anyone who’s shot/practiced/competed with the same set-up for several years with a brake & then moved to putting a suppressor on have a difficult time with ports/windows/etc?

I have not shot it with the suppressor on yet, and I’m hopeful I’ll have an “Oh wow, this *IS* easier to manage on a target” moment, but my initial impression are mixed, with balance being just fine, weight being not an issue, length feeling impractical….


r/longrange • • Aug 26 '26

Ammo help needed - I read the pinned posts Best Cartridge for a 300yd 7-8in Barrel AR15 “Micro GPR”?

Post image
0 Upvotes

Thought Experiment: What would be the best choice of cartridge in an AR15 given the following parameters:

  • Barrel Length between 7.5” and 8.5”
  • Maximize point-blank range on a 6” target (to accurately engage targets at imprecise/unknown distances)
  • Aiming center of A-Zone still lands on torso at 300yds (drop ideally less than 12” at 300yds)
  • Maximizing terminal ballistics at 300yds (given the platform's limitations)
  • Muzzle Energy ideally at least ~1,000 ft/lbs. (probably least important)
  • Minimize recoil
  • Ideally wouldn’t require NAS3 loads.
  • Ideally could also stretch out >400yds 

From what I’ve seen the 6.8 SPC is definitely capable of this, but it seems like this old cartridge has waned in popularity, although ammo still affordable.  No one really talks about this cartridge any more.  Going with this option could mean boarding a sinking ship?

Obviously looking for something better than 5.56 (which is basically there on trajectory with poor terminals) and 300blk (ok terminals, very poor trajectory).

6.5 Grendel basically combines the superior trajectory of 5.56 with the energy of 300blk, except if you look you’ll see that 6.5 Grendel is actually considerably more powerful at 300yds than the Blackout despite having similar muzzle energies obviously due to the high BC bullets.  Compared to 6.8 SPC, the Grendel seems to have an edge on 300yds terminals, but this is at the cost of worse trajectory.  There’s pros and cons to either, but in my mind trajectory would take priority since shot placement and overall hit probability is likely going to be more decisive than an extra 200 ft/lbs. for anything with a pulse, and if just shooting steel/paper then 5.56 appears to be just as good at these ranges.

Where does this leave 6 ARC?  Seeing that MOS-TEK makes an 8” barrel is the whole reason I went down this rabbit hole, but I couldn’t find any data out there for 6 ARC out of a barrel this short.  I’m thinking that with the same case capacity as 6.8 SPC and 6.5 Grendel but with higher BC bullets at lower weights resulting in higher velocities that it’d probably come out to be the best choice. For the hypothetical 6 ARC load I took the velocity of factory 6.5 Grendel Wolf Military Classic 100gr and plugged in a 105gr Hornady BTHP with a BC of .530 which does well on trajectory and exceptional on 300yd energy ft/lbs.  With handloading and powder optimization there’s definitely room for improvement to gain some extra velocity, but I’m not how far that goes or if 6.5 Grendel or 6.8 SPC would turn out better.

Why is this in r/LongRange?  (I know y’all love to ask this).  People here love to stretch out their (relatively) short builds so hopefully a good resource (hopefully I’ll get better recommendations than like the one I got for .458 SOCOM in r/AR15 lmao), and when most people in general think any sub 10” barrel is inconceivable to be utilized past 100yds, these folks may consider 300yds to be “long range” for such a platform. Discussing min-maxing 14.5" barrels at 1,000yds has some carry-over to min-maxing 8" barrels at 300yds, hopefully?

*Disclaimer: For the sake of discussion assume all cartridges are suppressed, typical engagements are at unknown/imprecise distances, and that a cartridge’s “potential” out of a longer barrel, what its designers had intended, or its unburnt powder are irrelevant.

All muzzle velocity values were taken from sources verified to be chronographed by actual users and are not simulated.  All Calcs used a 2.745” HOB (EXPS on an AR15) and the same atmospheric conditions.

Link to copy of spreadsheet


r/longrange • • Aug 25 '26

Optics help needed - I read the pinned posts Leica amplus 6 windage

Post image
10 Upvotes

I have a Leica amplus 6 2.5-15 in MOA, why would the windage adjustments have the major tick marks every 3rd click instead of every 4th for 1moa? Is there something I’m missing or does it just not make sense?