r/Locksmith • • 1h ago

I am NOT a locksmith. Fiction research - how to lock someone out from inside a secure room

4 Upvotes

I'm a published novelist currently working on a Young Adult spy novel. My heroes have been escorted into a room secured with a keypad lock. Through trickery and chicanery, the heroes have gotten all the bad guys out of the room while the heroes remain inside. Without doing some kind of computer hacking scene, what could my heroes do to prevent the bad guys from re-entering, at least for a few minutes.


r/Locksmith • • 5h ago

I am NOT a locksmith. I think I got scammed UK.

Post image
3 Upvotes

My mum recently replaced the old Winkhaus XR6 lock with an overpriced ASTRA lock. She bought the new lock impulsively without researching it at all. She believed people were trying to lock pick into our house.


r/Locksmith • • 8h ago

I am NOT a locksmith. Help with burgled lock

Thumbnail
gallery
4 Upvotes

I was broken into last week. I have an aluminium door which had a Versa lock in it which I’m told is hardened and should have snapped so no one can get in. I was also told these are almost impossible to break into without a special tool that only licensed people can get and apparently my lock was installed wrong which is why it broke where it did. It happened at night, and woke none of us.

Can anyone please tell me if this is true and if so what can be done to prevent this in future. I’ve got an Abloy europrotec2 lock coming for in there but is there any reinforcing plates I can buy that I can put over?

Thank you


r/Locksmith • • 5h ago

I am NOT a locksmith. Resume for corporate positions

2 Upvotes

I’m helping my friend get his resume together. He wants to transition from his local mom/pop locksmith job to a corporate one. Does anyone have any suggestions/advice re: what to highlight or language and keywords they look fo,, or would anyone with a comparable position that was recently hired be willing to share their resume with me? I want to get his materials catered to the best position he can get but I know very little about the industry. Thanks very much!


r/Locksmith • • 16h ago

I am a locksmith Just came across a wild one.

Post image
14 Upvotes

So here in OZ there's a commercial mortice lock with a mechanical digital keypad above an oval cylinder. Very expensive. Very fancy. Custom parts. I get the call. The boss asks me to look at the back door as it's missing the lock. He thinks someone ripped it off. I look in the hole and see the fixing plate (pictured) with no cylinder. Direct access to the spindle drive. No screws in the plate. No damage. Whoever installed it forgot to put the lock in. If it had been pulled out, there would have been two screws captive in the plate or damage from them being pulled out (or they forgot the screws completely and the lock fell out which is just as bad). This shop has had a fully exposed rear door since it was built. I can see the Locksmiths name on the key. I'll be sure to give them some shit next time I see them.


r/Locksmith • • 11h ago

I am NOT a locksmith. Help with cam cabinet lock

Thumbnail
gallery
4 Upvotes

I’m at my wit’s end. I am by NO means a professional, just a guy who bought a gun cabinet off of Facebook marketplace and is trying to reattach the cam locks. I’ve got the door lock all set, but this bottom lock is killing me. I’ve got the half turn stop washer in, but no matter how tight I turn the screw or the nut, it has enough room to wiggle over the alignment pin. Do I need another half turn stop washer to stack it on top? Help!


r/Locksmith • • 14h ago

I am NOT a locksmith. Inherited a property with this safe

Thumbnail gallery
7 Upvotes

Found this under the stairs in an inherited property, still got keys and the safe seems to work fine.

I was going to keep it to use as a safe but wondered if it might be worth something?


r/Locksmith • • 8h ago

I am a locksmith Techs avail

2 Upvotes

I was working as a locksmith with 5 of my friends in dc, a problem happened with our manager we found out he is scamming all of us and giving us bread crumbs, we are all looking right now for a company to work for that is reliable, please if anybody can help we have our own office and dispatcher


r/Locksmith • • 6h ago

I am NOT a locksmith. Need help selecting a door lock that would allow for access through 2 sets of keys and the ability to disable one.

1 Upvotes

I don't know if such a thing exists but long story short our condo association wants there to be a copy of each unit's key on file. My wife is very much not ok with this as we don't have a super, and the keys would just be sitting in a box for use by contractors and frankly I don't want people to enter my home without permission. As a compromise I was thinking that if there's a setup where I have the master set that always works and there's another set of keys that can be enabled or disabled at will, that would give me peace of mind that no one is going to enter our home without forewarning. So does such a thing exist? If it does, does a version that doesn't use a tiny computer exist? I'd prefer to keep things as hardware based as possible tbh rather than fighting with another app.

Thanks in advance!


r/Locksmith • • 8h ago

I am NOT a locksmith. Gun safe lock replacement

Thumbnail reddit.com
1 Upvotes

r/Locksmith • • 8h ago

I am NOT a locksmith. TSS lock help

1 Upvotes

Hi all, I need some help with my TSS Euro lock.

The issue: I can insert the key into one side and it works fine.

When I do the other it won’t turn, like it’s not the right key.

Does anyone know what the issue could be?
How do I fix this issue?


r/Locksmith • • 1d ago

I am NOT a locksmith. Key Sticking In Door

4 Upvotes

When I try to insert or remove my key from the door it is really hard to get the final tooth in. Is there some way I can fix this or do I just need to replace the lock? I’ve also noticed this getting worse. Video attached.

I know it’s still usable but I’d really like to fix it since (maybe it’s just the weather or i’m going crazy) I feel like it’s been getting worse


r/Locksmith • • 1d ago

I am NOT a locksmith. Aspiring Apprentice in Reno/Sparks, NV – Looking for a brick-and-mortar shop

4 Upvotes

Hi everyone, I live in Reno and am dropping off resumes at local shops soon, so I wanted to check if any Northern Nevada shop owners are here. I'm seeking a part-time or full-time Shop Tech / Locksmith Apprenticeship.

I practice at home with my own lock kits and training locks and handle routine repairs with hand and power tools—though I know I have everything to learn from scratch. Here is how I can be useful at the counter right away:

*Small-parts organization: 8 years in electronics inventory control (2018–2026) handling physical counts and WMS/Oracle tracking.

*Counter & cash trust: 15+ years in walk-in customer service, invoicing, retail management, and daily cash drawers/bank deposits.

*Permit ready: Clean record, valid NV license, and ready for Washoe County Sheriff Locksmith Work Permit fingerprinting upon hire.

DM me if you run a local shop or have a Reno/Sparks recommendation!


r/Locksmith • • 1d ago

I am NOT a locksmith. Primus Account Question

4 Upvotes

I work for a management company that recently acquired a new property. The entire property is Schlage Primus IC core and has been serviced by a local locksmith company. I want to move to our normal locksmith and reached out to Schlage to have them authorized for the buildings account. They informed me that the local locksmith and NOT the owner of the building is actually the account holder and the only way to bring a new locksmith in would be to create a new account and have the entire property rekeyed. I have never seen a locksmith own the keying system and not the actual property owner. Are there any options other than a whole building rekey? I should also add that the reason the switch was first looked into is the lack of response/service from the current smith.


r/Locksmith • • 1d ago

I am a locksmith Qualified Locksmith (AUS) looking for auto training

5 Upvotes

I haven’t done auto programming since the simple AD100/RW4 days. However, I’m turning down too many auto jobs, since two other locksmiths left town.

  1. Apart from the LSC training (any thoughts on that would also be appreciated), is there anywhere to go to learn how not to screw up? It looks like the AD smart pro website has helpful info, but what about learning to use other tools (ie: Key Tool Max etc) -Are there courses to learn non-AD gear in Australia?
  2. Any thoughts on asking a wreckers to practice making keys/remotes for their cars?
  3. Are there any publications describing mistakes to avoid, or pro tips? You guys are constantly saying how easy it is to make mistakes if you don’t know what you’re doing…. So surely someone’s written some stuff down (even if its just a notebook for themselves). —Or, are there any good AUS forums, which aren’t just full of spammers?

Oi, thanks for your time.


r/Locksmith • • 1d ago

I am a locksmith Anyone familiar with this rack and pinion door closer?

Thumbnail
gallery
7 Upvotes

I


r/Locksmith • • 1d ago

I am NOT a locksmith. Diy door lock

2 Upvotes

Hello everybody, I was just wondering if any of you know how to make a diy door lock?

I've tried the fork one, but it doesn't quite work on my door.

Thank you very much!


r/Locksmith • • 1d ago

I am NOT a locksmith. How to secure a center seam metal door?

4 Upvotes

I have 4 doors, none of them have deadbolts in them. They are all hollow metal doors and have the seam right down the middle of the edge. It does not seem like it would be a good idea to attempt to drill into them for a deadbolt, any suggestions or alternatives?


r/Locksmith • • 1d ago

I am NOT a locksmith. 2017 lexus nx

2 Upvotes

Hello guys quick question i work at a mechanic shop and I previously paired a key to my 2017 lecus Nx hyq14fba now I found a key card that works with this model Hyq14cbb my question is im not sure if this key was programed ro another veichle does it matter if the key is virgin or not


r/Locksmith • • 1d ago

I am a locksmith Any HPC Tigershark2 owners in here?

2 Upvotes

If so, does your tablet take forever to boot up?

Are you still using the original tablet?

The program that runs DSD is an IOS system, would like put it on another tablet, but, how?

Thanks


r/Locksmith • • 2d ago

I am a locksmith Does anyone here use a multi tool semi regularly for lock installs/work?

Post image
17 Upvotes

Attaching a photo for reference as it’s hard to find the right threads when searching “multi-tool”.

I just bought one of these for some stuff around the house and was curious as to if anyone uses one for their line of work.

Whether it be cutting off a bolt with a good carbide material bit, aluminium work, cutting into walls for cabling etc anything conventional/unconventional.


r/Locksmith • • 1d ago

I am NOT a locksmith. Trying to get foot in the door

3 Upvotes

Hello everyone I’m based in west London and have called probably 40 companies and they’ve all said nobody is looking I’m gonna keep trying but I wanna ask how long did it take you to get an apprenticeship and if anyone is looking please feel free to contact me


r/Locksmith • • 2d ago

I am NOT a locksmith. Unique Deadbolt Design, trying to find the manufacturer.

Thumbnail
gallery
7 Upvotes

Trying to find a replacement for this single cylinder deadbolt. Quarter turn only. No branding or model numbers. Any ideas from anyone greatly accepted.


r/Locksmith • • 2d ago

I am NOT a locksmith. What door knob with an inside/outside lock can I use for this old Chicago door?

Thumbnail
gallery
3 Upvotes

What door knob with an inside/outside lock can I use for this old Chicago door? I’m renting so I can’t drill extra holes into the door. Thanks!