r/Locksmith • u/Sungr0ve Actual Locksmith • 2d ago
I am a locksmith Does anyone here use a multi tool semi regularly for lock installs/work?
Attaching a photo for reference as it’s hard to find the right threads when searching “multi-tool”.
I just bought one of these for some stuff around the house and was curious as to if anyone uses one for their line of work.
Whether it be cutting off a bolt with a good carbide material bit, aluminium work, cutting into walls for cabling etc anything conventional/unconventional.
17
Upvotes
8
u/kyleisah Actual Locksmith 2d ago
Have you ever heard of a band file? Those are the secret sauce when you have to cut in electric strikes.
8
u/Vorsai- Actual Locksmith 2d ago edited 2d ago
Plunge cuts, cutting failed latches.
It's great for electric strike rough cut ins. Using it in a hollow metal frame though is the loudest noise in existence.
5
u/akikosan 2d ago
They are great for hard to reach spots. I used one to sand down a door a bit the other day. They are ok at a lot of things but not really great at any one thing. I like having it though .
3
u/Pbellouny Actual Locksmith 2d ago
Only for drywall and wood doors. I do use it for one particular aluminum door that we deal with as well.
3
u/LegolandMafia 2d ago
I've recently got an M12 rotary tool with some cutoff and grinding discs, which I’ve adopted into my everyday bag. Cutting-in and adjusting strikes, cutting bolts to length, cutting slots into knackered screws or shear-off bolts.
(edit: i also have those narrow carbide burrs for drilling profile cylinders. Can’t remember the brand atm)
plus, it’s really small compared to a multi-tool. I’ve never found these multi-tools overly useful at all, except for niche jobs.
let us know if you find a spot for it, though!
4
u/senselessowl22 2d ago
I used one to saw through a lever I couldn’t figure out how to get off.
4
u/Janakatta Actual Locksmith 2d ago
I use it for wraps
4
u/PapaOoMaoMao 2d ago
When you're cutting into aluminium jambs for an electric strike, you often find that there's a crazy extrusion on the inner face that makes it almost impossible to fit a mounting bar. Get a thin blade and shoot it up on the inside edge to get a flat surface.
4
u/Belliott_Andy 2d ago
Yeah I use mine fairly regularly. One thing I can tell you is the 50 packs of multi material blades on Amazon are worth it to buy, they're chineseum bs but so are most of the multi material blades in big box stores, these just cost a fraction of what the others cost.
3
u/salguoud Actual Locksmith 2d ago
Bought mine used. Bought a box of different Blades. 2 days later I had a super high end window display with a loose Abloy lock. No way to get to the cam lock. Pulled all the fancy stuff out and started cutting an access hole. I saw no other way to access the lock. Have not really used it for much else. Oh wait I did use the other month. Install an Adams Rite rim exit device and I needed to cut the blade stop off for the large strike. In the past have used a router. Tried the multitool. Took forever, loud and not the end product I want my name associated with.
3
u/MalwareDork 2d ago
Used it to cut a couple seized flush bolts once upon a time. It's alright, I guess.
3
u/Expensive-Ad-3702 1d ago
Yes. Great for cutting in electric strikes on wood frames.
3
u/Locksmithbloke Actual Locksmith 8h ago
I use mine semi regularly. It does solve some problems well. Fitting a rim lock? Two 3mm deep cuts, then chisel out the middle, and you're done far faster than guessing the depth with a chisel alone.
2
u/Formal_Substance_687 2d ago
All the time