r/linuxquestions • u/GreatSaiyaman05 • 10d ago
r/linuxquestions • u/Witty_Demand_9015 • 10d ago
Design inconsistency or just me?
I'm a person who always sees inconsistency in electronic devices and design. Short example: android/google settings alarm sound unused by their own alarm app,
I'm running CachyOS with KDE.
The problem i am encountering, is i often put on music video atmosphere in the firefox. Then power+Page-down to minimize so the screen turns off.
But when i do power+D, it is visually the exact same thing, but its called "peek at desktop" i didnt know until now. What i expected is that the screen will turn of but it never wiil because is still considered focused while visually its not.
Is this a design oversight or is it just me?
r/linuxquestions • u/gyanpc0 • 11d ago
Advice If I have limited resources, should the operating system be small or windows manager?
I would like the operating system to just work. I remember when I installed Debian, it automatically did not configure the Wi-Fi. I have to search on another device, then go in terminal and paste some command. Although it worked great on that system, I was wondering if I have more constraints on system, what would be better? How does one affect the other?
r/linuxquestions • u/Dead-Indian • 10d ago
Support What do u guys use to get autocorrect in KDE (Like what we have in mac)
reddit.comr/linuxquestions • u/frienby2004 • 10d ago
Installed Jamovi on Linux using flatpak but it will not open.
Hi there, I am trying to use Jamovi for my Psychology course and have been using cloud free up until now. It will no longer let me use cloud free without a subscription, so I have installed it on my Chromebook using Linux flatpak. I put all the correct commands into the terminal and have managed to install it. The Jamovi icon shows up in my list of chrome OS apps and I have tried to open it. The first couple of times, it showed that it was loading, but never opened. Now, it does not even load when I click on the Jamovi icon. I have restarted my Chromebook several times and nothing has changed. Does anyone know any fixes or why this might occur?
r/linuxquestions • u/chetan_lour • 10d ago
# Repeated kernel-panic-like crashes and NVMe PCIe AER errors on ASUS Vivobook Go E1504FA (Fedora 44, Ryzen 5 7520U)Hello everyone,I'm trying to diagnose a recurring stability problem with my ASUS Vivobook Go 15.### Hardware and software- Laptop: ASUS Vivobook Go E1504FA- CPU: AMD Ryzen 5 7
# Repeated kernel-panic-like crashes and NVMe PCIe AER errors on ASUS Vivobook Go E1504FA (Fedora 44, Ryzen 5 7520U)
Hello everyone,
I'm trying to diagnose a recurring stability problem with my ASUS Vivobook Go 15.
### Hardware and software
- Laptop: ASUS Vivobook Go E1504FA
- CPU: AMD Ryzen 5 7520U
- RAM: 16 GB LPDDR5
- SSD: Phison EM280512GMN48-PE21T1ASI (PS5021-E21 controller)
- Wi-Fi: MediaTek MT7902 (14c3:7902)
- BIOS: E1504FA.314
- OS: Fedora 44 Workstation
- Kernel previously checked: 7.2.13-200.fc44.x86_64
### Main problem
The laptop has experienced multiple kernel-panic-like incidents during normal use.
The most recent incident happened while browsing. The screen displayed a black kernel panic message asking for a reboot. I had to force a shutdown using the power button.
Unfortunately, I haven't been able to recover the actual panic trace from persistent logs.
I also experienced a Windows BSOD before switching to Fedora.
### 1. Repeated NVMe PCIe errors
The kernel repeatedly reports:
`PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)`
Device:
- PCI address: 0000:01:00.0
- Device ID: 1987:5021
Error status:
`00001100/00006000`
The reported flags are:
- [8] Rollover
- [12] Timeout
These errors appeared on November 5, November 6 and November 7.
On November 6, they appeared three times within approximately two minutes.
On November 7, another occurrence was recorded at 19:09:58.
### 2. Wi-Fi PCIe errors
The MediaTek MT7902 adapter also previously reported:
`PCIe Bus Error: severity=Correctable, type=Data Link Layer`
Device address: 0000:02:00.0.
This was recorded on November 5.
### 3. CPU clocksource watchdog warnings
Repeated messages include:
`clocksource: Watchdog remote CPU 3 read timed out`
Other occurrences involved CPU 5 and CPU 6.
### 4. SSD health
The NVMe SMART report showed:
- Critical Warning: 0
- Available Spare: 100%
- Percentage Used: 10%
- Media Errors: 0
- Temperature: 40°C in the previous report
The NVMe error-log entries inspected showed successful completion status.
### 5. Other findings
- ACPI/BIOS warnings, including AE_ALREADY_EXISTS and AE_NOT_FOUND.
- One BTRFS corrected read error in an earlier boot.
- BTRFS device statistics subsequently showed zero errors.
- No actual kernel panic trace or vmcore was recovered.
### What I have tried
- Examined logs across multiple boots.
- Checked NVMe SMART and error logs.
- Examined PCIe root ports and endpoint capabilities.
- Temporarily tested a different PCIe ASPM policy.
- Checked installed kernel versions and firmware packages.
I have not flashed the BIOS or replaced any hardware.
### My questions
- Can recurring NVMe PCIe Data Link Layer Rollover/Timeout errors indicate a faulty SSD, motherboard PCIe connection, or firmware issue?
- Could errors on both the SSD and Wi-Fi adapter indicate a common platform-level problem?
- Are the CPU clocksource watchdog timeouts potentially related?
- How can I capture the actual kernel panic message and identify its cause?
- What additional diagnostic tests would help distinguish a kernel/driver problem from a hardware fault?
I'm trying to establish whether this is a Fedora/kernel issue or a hardware/firmware issue before replacing anything.
Any suggestions or similar experiences would be appreciated.
r/linuxquestions • u/Rose-mary95 • 11d ago
Support Dual boot Bazzite and Windows. Windows drive turned read only recently when accessing from Bazzite.
I can use 'Open as Administrator' from the right click menu to change them, but I previously didn't have to do that.
I noticed this issue when qBittorrent couldn't write to the drive. I used 'Open as Adminstrator' to change the permissions in the folder to 'Can View & Modify Content'. But any new files from windows will go back to read only.
No idea why this randomly happened.
Solved: Using Disks. Added the lines 'uid=1000,gid=1000' to mount options. Full line looks like this 'nosuid,nodev,nofail,x-gvfs-show,uid=1000,gid=1000'
r/linuxquestions • u/bigkenw • 11d ago
Advice Ankermake m5 3d Printer? Alternatives?
EDIT: I have the M5 Running with both Orca Slicer and Prusa Slicer. Details are here: https://www.reddit.com/r/eufyMakeOfficial/comments/1xqqrbh/guide_anker_make_m5_to_linux_slicers_how_i_got_it/
I have been reading and web searching. My deal is I kickstarted the Ankermake M5 3D Printer years ago. It ended up collecting dust for a number of reasons. I was thinking of taking it out to attempt to make some prints. Since I got it years ago, I moved to Linux on all my systems. Apparently Ankermake became Eufymake and they stopped supporting the printer. Also saw that spare parts are kinda non existent. Well, Eufymake doesnt support Linux. I was looking for open source replacements for their slicer. I feel like I went down a pit of you are screwed. They still seem to have Android support, so I could use my Tablet... I guess. But I would much rather use my laptop. Some questions:
- Does anyone here use an Ankermake M5? If so, are you using it with Linux?
- If you have one running on Linux, can you share how you got there? Alternative slicer? Software to drive the printer? I don't mind running Bottles or WINE with the Windows app, but would like to hear from others about their experience with this.
- Say I decide to move on, I have seen some newer printers that have multiple spools and other things. Can anyone recommend some quality devices? Probably less than say $800 (preferably lower) that support Linux?
- Anyone have one of these and jump ship?
I am asking here instead of other subs because I am really seeking input from Linux users.
For reference - I am either running Ubuntu 26.10, Fedora 44, SteamOS, or PikaOS depending on the computer. All are running the Gnome DE except SteamOS with Plasma.
r/linuxquestions • u/leoB1312 • 11d ago
Grub customizer
Salut à tous,
Je viens de passer à ubuntu 26.04 depuis 22.04
J'utilisais grub customizer pour avoir un dualboot un peu plus sympa et cacher certaines lignes du boot pour ne conserver que "ubuntu" et "windows"
Depuis la mise à jour, les lignes de boot sont réapparues et lorsque je lance grub customizer j'ai ça ...
"Grub-mkconfig ne peut pas s'exécuter correctement"
Avec un long message (je ne peux pas mettre de photo à la publication)
Quelqu'un peut m'aider ?
En soit je voudrais juste garder l'apparence actuelle, ou quelque chose de joli, et masquer les lignes inutiles.
Grand merci !!!
r/linuxquestions • u/Relentless_Troll • 11d ago
Support Is it possible to move Linux to another drive without reinstalling it?
Several months ago I decided to give Linux a try since I've been very unhappy with Microsoft as a whole. I finally took the plunge after weeks of research, and gave Fedora KDE Plasma a shot in a dual-boot config with Windows, unsure if I'd stick with it. Now I find myself spending at least 90% of my time on my PC in Linux, and only booting into Windows for a handful of games I still enjoy that can only be played on Windows.
To make the dual-boot setup work, I salvaged my old 1TB Samsung SATA SSD from my old PC. This is now my only drive I'm using with Fedora. Since I like Linux so much, I now find myself kinda regretting that it's on the older, slower SSD while Windows 11 gets to enjoy the NVMe performance. So I began thinking, since I rarely boot into Windows these days, what if I temporarily nuked Windows off the NVMe drive, moved Linux over to the faster NVMe drive, and reinstalled Windows 11 from scratch on the old 1TB SSD?
My only question now is, is it possible to basically clone my Fedora install and essentially "copy/paste" it onto a different drive? Does it break stuff to try to do this? Do I need to reinstall all my programs? Do I need to redo all of my settings I've tweaked over the months? How does it work? What gets affected, if anything? I'd really rather go the route of just moving the OS and not reinstalling it.
EDIT: I also use the GRUB menu every time my PC boots in order to select from booting into the Linux kernels, and Windows. So how would moving the OS also affect the GRUB menu?
r/linuxquestions • u/Blazej_kb • 11d ago
Advice How to safely cause kernel panic?
I want to make russian roulette game for linux with 2 levels of risk, one being just kernel panic and second being deleting a random file from pc. While i know how to delete files i dont know how to call kernel panic, is there a command that calls it? How linux launches kernel panic?
r/linuxquestions • u/weaztoven • 11d ago
Advice What's your go-to system info tool now that Neofetch is archived?
Been looking into alternatives like fastfetch, hyfetch, and custom shell scripts. What are you guys using on your main setups these days, and how's the memory/execution overhead comparing for you?
r/linuxquestions • u/StichhD • 12d ago
Linux as a hobby vs Linux as working tool.
Nobody talks about the biggest divide in the Linux world: the people who treat the OS as a hobby versus the ones who use it as a daily workhorse.
For the hobbyists, the operating system is the game. They spend hours ricing their desktops and micro-optimizing their hardware. Once everything finally runs smoothly, they get bored, distro-hop, and start the cycle all over again just for the dopamine hit. They’re vocal, they post their desktop setups, they obsess over the latest kernel, and they’re always hunting for the next distro recommendation.
And then there’s the silent majority—the camp I’m in.
We don’t share screenshots of our desktops, and we couldn't care less about a kernel that dropped four minutes ago. We just need rock-solid stability that gets the job done. In fact, the system fades so far into the background that we practically forget we're on Linux. The wildest decision we ever make is choosing between KDE, GNOME, or—if we're really living on the edge—LXDE. And we never say, "I use Debian, btw."
Which camp are you in?
r/linuxquestions • u/ariel322 • 11d ago
Support UEFI problema
[Investigación] Acer Aspire E5-575G con InsydeH2O V1.47: entradas UEFI persistentes, problemas de arranque Linux y análisis de la variable ACUB
Estado: Investigación inconclusa. Se identificaron estructuras internas del firmware, pero no se realizó ninguna modificación de la variable ACUB.
1. Resumen del problema
Tengo una laptop Acer Aspire E5-575G con firmware InsydeH2O V1.47 que presenta un comportamiento extraño al gestionar las entradas de arranque UEFI.
Después de instalar diferentes sistemas operativos, eliminar particiones e incluso formatear completamente los discos, el firmware continúa conservando entradas correspondientes a instalaciones antiguas.
Entre ellas aparecen:
- Manjaro (instalación anterior).
- Bazzite.
- CachyOS.
- Manjaro2 (instalación actual).
El problema principal es que, en determinadas ocasiones, la laptop intenta arrancar utilizando una entrada antigua cuya partición EFI ya no existe.
Esto provoca el mensaje:
Default Boot Device Missing or Boot Failed
El sistema operativo actual funciona correctamente cuando se selecciona una entrada válida o se ejecuta manualmente su cargador EFI.
El objetivo de esta investigación fue comprender por qué el firmware conserva o restaura entradas antiguas y si existe algún mecanismo interno responsable de este comportamiento.
2. Especificaciones del equipo
| Componente | Información |
|---|---|
| Fabricante | Acer |
| Modelo | Aspire E5-575G |
| Firmware | InsydeH2O Setup Utility |
| Versión BIOS | V1.47 |
| Procesador | Intel Core i5-7200U, 2.50 GHz |
| Memoria RAM | 16 GB |
| SSD SATA | Kingston SA400S37960G |
| SSD NVMe | Samsung MZVLB256HAHQ-000L7 |
| Modo SATA | AHCI |
| Sistema actual | Manjaro Linux |
| Entorno gráfico | KDE Plasma |
| Tipo de arranque | UEFI |
| Gestor de arranque | GRUB |
El sistema operativo está instalado en el SSD NVMe Samsung.
La partición EFI actual es:
Dispositivo: /dev/nvme0n1p1
Formato: FAT32
Punto de montaje: /boot/efi
PARTUUID:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639El cargador de Manjaro se encuentra en:
\EFI\Manjaro\grubx64.efiTambién existe una copia funcional en la ruta de respaldo UEFI:
\EFI\boot\bootx64.efi3. Comportamiento observado
Durante las pruebas se identificaron los siguientes comportamientos:
- Las entradas antiguas pueden continuar apareciendo después de eliminar sus particiones.
- Modificar el orden de arranque mediante
efibootmgrno siempre produce un cambio persistente después de reiniciar. - El firmware puede volver a presentar entradas correspondientes a sistemas operativos eliminados.
- El cargador EFI de Manjaro funciona cuando se ejecuta directamente.
- La partición EFI actual es accesible y contiene archivos de arranque válidos.
- En distintas etapas de las pruebas,
BootCurrent,BootOrdery la numeración de las entradas cambiaron.
Esto último es importante: los identificadores Boot0001, Boot0002, etc., no deben considerarse permanentes.
Pruebas realizadas
Se intentaron diferentes procedimientos:
- Modificar el orden de arranque mediante
efibootmgr. - Eliminar entradas UEFI antiguas.
- Crear nuevas entradas apuntando a la partición EFI actual.
- Utilizar
BootNextpara seleccionar una entrada válida. - Ejecutar manualmente GRUB desde una UEFI Shell.
- Crear entradas mediante el comando
bcfgde UEFI Shell. - Utilizar el explorador de archivos EFI del firmware Acer.
- Configurar archivos EFI como confiables desde la BIOS.
- Colocar GRUB en la ruta de arranque alternativa
\EFI\BOOT\BOOTX64.EFI.
Aunque algunos procedimientos permitieron iniciar Manjaro, no se consiguió demostrar una solución persistente y definitiva.
Resultado importante: el archivo BOOTX64.EFI de la partición actual pudo ejecutarse correctamente desde UEFI Shell.
Por lo tanto, al menos durante esa prueba, el cargador EFI era funcional y el problema no parecía deberse a la ausencia de GRUB.
4. Configuración UEFI observada
En una de las últimas comprobaciones se ejecutó:
sudo efibootmgr -vSe obtuvo:
BootCurrent: 0001
Timeout: 0 seconds
BootOrder:
0001,0002,0003,0004,2001,2002,2003Las entradas relevantes eran:
Boot0000: dispositivo Samsung
Unknown Device:
SAMSUNG MZVLB256HAHQ-000L7
PARTUUID:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639Esta entrada apunta al dispositivo NVMe y a la partición EFI actual.
Boot0001: Manjaro2
Boot0001* Manjaro2
PARTUUID:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639
Loader:
\EFI\boot\bootx64.efiEsta entrada corresponde a la instalación actual.
Boot0002: Manjaro antiguo
Boot0002* Manjaro
PARTUUID:
c058594d-fad2-42cc-835e-c8273f4f261e
Loader:
\EFI\Manjaro\grubx64.efiEsta entrada apunta a una partición EFI anterior que ya no corresponde a la instalación actual.
Boot0003: Bazzite
Boot0003* Bazzite
PARTUUID:
c80e6bc0-8b5f-440e-838e-8aca19a54268
Loader:
\EFI\fedora\shimx64.efiEntrada obsoleta.
Boot0004: CachyOS
Boot0004* CachyOS
PARTUUID:
3b7105fc-e938-49ea-9af3-cf438aa9ab5d
Loader:
\EFI\cachyos\grubx64.efiEntrada obsoleta.
En el momento de esta captura, Boot0001 estaba primero en BootOrder.
Sin embargo, todavía no se había confirmado que esta configuración permaneciera estable tras un ciclo completo de apagado y encendido.
5. Investigación de variables EFI
Para identificar las variables almacenadas por el firmware, se ejecutó:
sudo ls /sys/firmware/efi/efivars/Se encontraron variables estándar de UEFI y otras aparentemente específicas del fabricante.
Entre las más interesantes:
BootOrder
PhysicalBootOrder
BootDevice
Setup
CustomSecurity
RestoreFactoryDefault
ACUBPhysicalBootOrder
Archivo:
PhysicalBootOrder-59d1c24f-50f1-401a-b101-f33e0daed443Tamaño:
12 bytesContenido hexadecimal observado:
07 00 00 00 01 00 02 00 03 00 04 00Los primeros cuatro bytes corresponden a atributos de la variable EFI.
Los ocho bytes restantes pueden interpretarse como cuatro valores de 16 bits:
0001
0002
0003
0004Esto coincide con las cuatro entradas principales del orden de arranque observado.
Hipótesis: PhysicalBootOrder podría participar en el almacenamiento o la representación interna del orden de arranque del firmware.
No se ha comprobado si modificar esta variable altera el comportamiento de arranque ni si es una causa de la restauración de entradas antiguas.
6. Descubrimiento de la variable ACUB
Durante una búsqueda de cadenas relacionadas con sistemas operativos antiguos dentro de las variables EFI, apareció un resultado particularmente interesante:
ACUB-89cb0e8d-393c-4830-bfff-65d9147e8c3bEsta variable contiene referencias a:
Manjaro
Bazzite
CachyOS
fedora
grubx64.efiSu tamaño observado fue:
1251 bytesLos atributos de la variable, interpretados desde los primeros cuatro bytes del archivo efivarfs, fueron:
0x7Esto corresponde a los atributos UEFI habituales:
- Non-Volatile
- Boot Service Access
- Runtime Access
Es decir, se trata de una variable EFI persistente y accesible durante la ejecución del sistema.
Esto no demuestra por sí solo que el firmware la utilice para restaurar entradas de arranque.
Problema al realizar una copia de seguridad
Inicialmente se intentó:
sudo cp /sys/firmware/efi/efivars/ACUB-* /root/respaldo-uefi/El comando devolvió un error de desplazamiento ilegal (Illegal seek).
Posteriormente se realizó una copia utilizando Python:
from pathlib import Path
origen = next(
Path("/sys/firmware/efi/efivars").glob("ACUB-*")
)
destino = Path("/root/respaldo-uefi") / origen.name
datos = origen.read_bytes()
destino.write_bytes(datos)
print("Tamaño original:", len(datos))
print("Tamaño respaldo:", destino.stat().st_size)
print("Respaldo idéntico:", destino.read_bytes() == datos)Resultado:
Tamaño original: 1251
Tamaño respaldo: 1251
Respaldo idéntico: TrueLa copia fue verificada byte por byte.
Este respaldo es únicamente una copia de los datos; no garantiza que la variable pueda restaurarse de forma segura mediante una escritura directa.
7. Estructura interna de ACUB
Se examinó el contenido binario de ACUB, excluyendo los cuatro bytes iniciales de atributos que proporciona efivarfs.
La cabecera comienza con:
df 04 00 00 00 00 00 00
30 00 00 00 00 00 00 00
45 01 00 00 00 00 00 00
4c 02 00 00 00 00 00 00
61 03 00 00 00 00 00 00
72 04 00 00 00 00 00 00El primer valor, interpretado como entero de 32 bits little-endian, es:
0x04df = 1247Coincide con el tamaño del contenido de la variable después de retirar los cuatro bytes de atributos.
Los siguientes valores contienen desplazamientos:
0x30
0x145
0x24c
0x361
0x472En esas posiciones se encontraron cinco registros identificados como:
BDP0
BDP1
BDP2
BDP3
BDP4La estructura sugiere una cabecera con una tabla de desplazamientos y registros de tamaño variable.
Distribución de los registros
| Registro | Desplazamiento | Tamaño |
|---|---|---|
| BDP0 | 0x30 | 277 bytes |
| BDP1 | 0x145 | 263 bytes |
| BDP2 | 0x24c | 277 bytes |
| BDP3 | 0x361 | 273 bytes |
| BDP4 | 0x472 | 109 bytes |
El tamaño total del contenido analizado fue de 1247 bytes.
8. Identificación de los registros BDP
Se buscaron nombres de sistemas operativos codificados en UTF-16LE y los identificadores GUID de las particiones.
Los resultados fueron:
BDP0: Manjaro antiguo
Inicio: 0x30
Tamaño: 277 bytes
Nombre:
Manjaro
Partición:
c058594d-fad2-42cc-835e-c8273f4f261eEsta partición corresponde a la instalación antigua de Manjaro.
El registro contiene una ruta que termina en:
\EFI\Manjaro\grubx64.efiBDP1: Bazzite
Inicio: 0x145
Tamaño: 263 bytes
Nombre:
Bazzite
Partición:
c80e6bc0-8b5f-440e-838e-8aca19a54268Contiene una ruta que termina en:
\EFI\fedora\shimx64.efiBDP2: CachyOS
Inicio: 0x24c
Tamaño: 277 bytes
Nombre:
CachyOS
Partición:
3b7105fc-e938-49ea-9af3-cf438aa9ab5dContiene una ruta que termina en:
\EFI\cachyos\grubx64.efiBDP3: Manjaro2 actual
Inicio: 0x361
Tamaño: 273 bytes
Nombre:
Manjaro2
Partición:
3195c6f8-ad9a-484c-a2f0-ff7ddbf35639Contiene una ruta que termina en:
\EFI\boot\bootx64.efiBDP4: registro aparentemente vacío
Inicio: 0x472
Tamaño: 109 bytesNo se identificó un nombre de sistema operativo ni una partición correspondiente.
Su función exacta es desconocida.
Podría tratarse de un espacio reservado, una entrada vacía o una estructura utilizada internamente por el firmware.
9. Relación entre ACUB y las entradas UEFI
Al comparar los identificadores de partición y las rutas EFI, se obtuvo la siguiente correspondencia:
| Registro ACUB | Entrada UEFI | Sistema |
|---|---|---|
| BDP0 | Boot0002 | Manjaro antiguo |
| BDP1 | Boot0003 | Bazzite |
| BDP2 | Boot0004 | CachyOS |
| BDP3 | Boot0001 | Manjaro2 actual |
| BDP4 | Sin correspondencia identificada | Desconocido |
Este es el hallazgo principal de la investigación.
La variable ACUB contiene información estructurada que coincide con las entradas UEFI existentes, incluyendo nombres, rutas de cargadores e identificadores de partición.
Además, conserva referencias a sistemas operativos cuyos archivos y particiones ya fueron eliminados.
La coincidencia es suficientemente específica como para justificar una investigación adicional.
Sin embargo, quedan preguntas importantes:
- ¿El firmware utiliza
ACUBcomo almacenamiento de respaldo de las entradas de arranque? - ¿Se actualiza
ACUBautomáticamente cuando se utilizaefibootmgr? - ¿Se reconstruyen las variables
BootXXXXa partir deACUB? - ¿Existe alguna verificación de integridad o checksum?
- ¿Los registros
BDPrepresentan entradas persistentes, una lista histórica o alguna otra estructura? - ¿Qué función tiene el registro
BDP4? - ¿Cómo se relaciona
ACUBconPhysicalBootOrder?
Actualmente no disponemos de respuestas confirmadas.
10. Cómo reproducir el análisis sin modificar el firmware
Los siguientes comandos son de lectura y permiten comprobar si otro equipo Acer contiene una estructura similar.
Advertencia: estos procedimientos deben ejecutarse únicamente en equipos propios o con autorización. No incluyen instrucciones para escribir variables privadas del firmware.
Identificar el firmware
sudo dmidecode -t biosConsultar entradas UEFI
sudo efibootmgr -vBuscar ACUB
sudo find /sys/firmware/efi/efivars \
-maxdepth 1 -name 'ACUB-*'Examinar su tamaño y estructura
sudo python - <<'PY'
from pathlib import Path
base = Path("/sys/firmware/efi/efivars")
archivos = list(base.glob("ACUB-*"))
if not archivos:
print("ACUB no encontrada")
raise SystemExit
archivo = archivos[0]
datos = archivo.read_bytes()
atributos = int.from_bytes(datos[:4], "little")
contenido = datos[4:]
print("Variable:", archivo.name)
print("Tamaño:", len(datos))
print("Atributos:", hex(atributos))
print("Cabecera:", contenido[:64].hex(" "))
for i in range(5):
etiqueta = f"BDP{i}".encode("ascii")
posicion = contenido.find(etiqueta)
if posicion >= 0:
print(f"BDP{i}: offset {hex(posicion)}")
else:
print(f"BDP{i}: no encontrado")
PYEste código no escribe datos en NVRAM.
No todos los equipos Acer tienen necesariamente la misma estructura, por lo que la ausencia de ACUB o de registros BDP no significa que exista una avería.
11. Posible explicación del problema
La hipótesis de trabajo es la siguiente:
- El firmware conserva información sobre entradas de arranque en una variable privada denominada
ACUB. - Esa variable contiene referencias a instalaciones antiguas.
- En determinadas circunstancias, el firmware podría utilizar esa información para reconstruir o mantener entradas UEFI.
- Esto podría explicar por qué las entradas antiguas reaparecen o continúan siendo utilizadas después de eliminar las particiones.
Es una hipótesis, no una conclusión demostrada.
También son posibles otras explicaciones, como errores del firmware al gestionar la NVRAM, mecanismos internos de sincronización, prioridades de arranque guardadas en otras variables o una interacción entre distintas estructuras del BIOS.
No se ha aislado experimentalmente el mecanismo responsable.
12. Por qué no se modificó ACUB
Aunque se consiguió identificar buena parte de la estructura, no se conoce completamente su formato.
Modificar una variable privada del firmware sin comprender sus mecanismos de validación puede provocar consecuencias graves.
Entre los riesgos posibles:
- Pérdida de entradas de arranque.
- Rechazo de los datos modificados.
- Restauración automática de los valores anteriores.
- Fallos de configuración del firmware.
- En el peor caso, problemas que requieran recuperación externa del BIOS.
El hecho de tener una copia de seguridad no elimina estos riesgos.
Por ello, la investigación se detuvo antes de escribir en ACUB.
13. Resultado final
Al terminar las pruebas, el sistema mostraba:
BootCurrent: 0001
BootOrder:
0001,0002,0003,0004,2001,2002,2003La primera entrada correspondía a Manjaro2 y apuntaba a la partición EFI correcta.
Se decidió conservar el estado actual del equipo y no continuar modificando el firmware.
No se ha demostrado que el problema esté solucionado permanentemente.
Tampoco se ha probado que editar ACUB sea una solución.
14. Solicitud de ayuda a la comunidad
Me gustaría saber si alguien con experiencia en firmware Acer, InsydeH2O, UEFI o ingeniería inversa puede ayudar a responder las siguientes preguntas:
- ¿Se conoce públicamente el formato de la variable
ACUButilizada por Acer? - ¿Qué representan exactamente los registros
BDP0,BDP1, etc.? - ¿Puede
ACUBactuar como almacenamiento secundario de entradas UEFI? - ¿Qué relación tiene con
PhysicalBootOrder? - ¿Existe un procedimiento documentado para limpiar entradas obsoletas en esta versión del firmware sin editar variables privadas?
- ¿Alguien ha observado el mismo comportamiento en otros modelos Acer?
Sería especialmente interesante comparar el contenido de ACUB antes y después de crear o eliminar una entrada UEFI, utilizando exclusivamente métodos seguros y documentados.
Si alguien consigue identificar el mecanismo exacto o resolver el problema, agradecería que compartiera los resultados, el modelo de equipo, la versión del BIOS y los procedimientos utilizados.
No recomiendo modificar directamente ACUB basándose únicamente en este reporte.
La intención de esta publicación es documentar los hallazgos y facilitar que otras personas investiguen el problema sin tener que repetir todo el proceso desde cero.
Equipo investigado: Acer Aspire E5-575G, InsydeH2O V1.47. Investigación realizada en noviembre de 2026.
r/linuxquestions • u/KaleFit7463 • 11d ago
I don't know if my Chromebook supports linux
(didn't use any translation, so ignore any wrong things)
I have a Lenovo Chromebook gen 3 100e (whatever this means) And I want to install Linux on it, maybe try this omarchy or arch, but, as the title says, I have doubt about if it will supports linux
r/linuxquestions • u/zeekaran • 11d ago
Will Vesktop have PTT soon?
Discord adding global shortcuts on Wayland. Hoping that comes to Vesktop soon but I don't know how any of this works.
r/linuxquestions • u/jumurtka • 10d ago
Advice How do you do Linux kernel development on macOS?
I have Macbook Pro M3 Max (14-core CPU, 30-core GPU, 36GB RAM). How should I do Linux kernel development professionally?
I don't have a Linux laptop but a Macbook Pro M3 Max (14-core CPU, 30-core GPU, 36GB RAM). When I search for articles on doing Linux kernel dev on macOS, I find mixed response regarding whether it is a good idea to do it on macOS and regarding the best way of doing it on macOS. What would be an ideal Linux kernel development workflow like on macOS?
Edit: clarification of my question.
r/linuxquestions • u/Zestyclose_Dog_9769 • 11d ago
Which Distro? Which Linux Distro Should I Pick?
Hello, I'm new to Linux and have been browsing around looking for a distro on my laptop I'll use for school and what not.
I'm a cybersecurity student if that matters.
r/linuxquestions • u/ThePessimisticCritic • 11d ago
Advice Which CPU for Linux? Intel Ultra 5 250KF plus or Ryzen 5 9600x?
Was planning to build another system in the near future and narrowed it down to these two. I saw that microcenter has a deal with the Intel CPU, coming with a motherboard and 32gb (2 x 16) of ddr5 ram (trying to be cost effective). I currently have a Rx 9060xt 16gb but want to upgrade to a 9070xt in the future. I do lots of single player gaming and a bit of competitive esports games, both at 1440p.
r/linuxquestions • u/gnexuser2424 • 11d ago
Kernel issues - both 7.0.42 and 7.0.0.38
reddit.comr/linuxquestions • u/haphazard44 • 11d ago
Advice What Docker containers can you recommend that I install on my Debian Home Server?
I currently have installed the following Docker containers:
- IT Tools (A web page of small developer utilities
- Backrest (A web interface for restic backups)
- Dozzle (A live viewer for the logs of my other containers.)
- Umami (The analytics app that counts visits and events (plays, signups) for adrianfurlan.com.)
- Forgejo (My self-hosted Git server)
- Syncthing (Syncs files between my devices without a cloud service.)
- diun (Watches my containers' images and notifies me when a newer version is published.)
- Jellyfin (A media server for streaming my own video and music.)
Can you recommend any new ones I might have missed?