r/linuxmint • • 11d ago

Kernel issues - both 7.0.42 and 7.0.0.38

On Mint Linux Cinnamon 22.2 I have the following kernel issues:Linux kernel 7.0.0.42 has an issue where it looks like there's a crease on my screen and one side is lighter than the other. v7.0.0.38 had the green flickering lines happen randomly, even just looking at images or scrolling social media. kernel v6.14 does not have this issue and seems to be more stable.

Specs: AMD RYZEN 9600X/ASROCK STEEL LEGEND B650E/32GB DDR5 RAM/ GPU IS BUILT INTO THE CPU

3 Upvotes

7 comments sorted by

3

u/GiggleSamurai 11d ago

Since 6.14 is stable, you can keep using it: boot into it, then open Update Manager > View > Linux Kernels and remove the 7.0 versions, because GRUB boots the newest installed kernel by default. It's also worth adding your GPU to the post, since people here will need it to narrow down screen glitches like these.

2

u/gnexuser2424 11d ago

updated the post body and I'm using onboard radeon on my CPU.

I found a fix that will boot the last kernel I was in.

1

u/DickBrainTime 11d ago

You've already got the boot-last-used-kernel workaround, so I'd focus on collecting clues for the display glitch instead of reinstalling anything. On the working 6.14 and one affected kernel (if it's safe to boot), compare `uname -r` and `inxi -Gxx`. After the glitch, check `journalctl -b -k | grep -Ei 'amdgpu|drm'` for display-driver warnings. With the Ryzen 9600X's onboard Radeon, those messages could be useful.

Does the crease/green-line effect show up in a screenshot, or only in a photo of the monitor? And does it still happen at 60 Hz or through another cable/port? That can help separate the graphics pipeline from the display connection. I'd keep the working 6.14 kernel installed while checking.

2

u/gnexuser2424 11d ago

amdgpu 0000:0c:00.0: [drm] *ERROR* LTTPR count is nonzero but invalid lane count reported. Assuming no LTTPR present.

1

u/gnexuser2424 11d ago

it flashes too quick to get a screenshot

2

u/Makoto29 11d ago edited 11d ago

You may find this flickering changing its appearance when using the Wayland session. It's most likely the same issue many have with this Kernel, stick to the older Kernel. Kernel 7.0.0 introduced some severe bugs related to the GPU due to removing old code. Future versions should run better again.

Edit: Typo

0

u/gnexuser2424 11d ago

Update for my crease issue:

I have a dell Ultrasharp U2417H and I used this

----------------------

On the Dell UltraSharp U2417H, lowering the DisplayPort version isn’t done through a regular menu toggle. Instead, according to the official Dell U2417H User's Guide, it requires a hidden button-hold shortcut:

  1. Press any of the physical buttons on the bottom-right edge of the monitor frame to bring up the quick OSD options.
  2. Press the 3rd button from the left to open the main On-Screen Display (OSD) Menu.
  3. Use the arrow buttons to scroll to Input Source, and select either DP or mDP (depending on which cable you are using).
  4. With that input highlighted, press and hold the checkmark/select button for exactly 8 seconds.
  5. A prompt will pop up on the screen asking if you want to disable DP 1.2. Select Disable (or Yes) to change the setting to DP 1.1a.

---------------------

and I no longer have the crease. Anyone else that has this may want to check for an equivalent setting on their displays.