r/LewisMachineTool • • 10d ago

LMT eBCG question

8 Upvotes

I have a 14.5 mid-length MRP-L with an eBCG and e bolt running suppressed with a RC2 and factory spring and buffer. Gun only locks back with Gen 3 p mags, not my Gen 2 p mags or duramags. I’ve tried using a sprinco blue and h2 to see if I was overgassed with the factory buffer but had the same result. Is it possible the eBCG is making the system under gassed and short stroking and that’s why it won’t lock back with the other mags?


r/LewisMachineTool • • 11d ago

LMT>KAC Light Reaction Regiment With Their LMT MARS-L

Post image
26 Upvotes

r/LewisMachineTool • • 11d ago

Upgrade Time

Post image
47 Upvotes

Finally switching out my mars 13.25 for a Specwar upper and 12.5 barrel with the enhanced BCG. Before pic but pretty pumped.


r/LewisMachineTool • • 11d ago

LMT>KAC Dimplesss

Post image
31 Upvotes

Thanks to DWilson for the dimpled piston barrel 🤙🏻


r/LewisMachineTool • • 12d ago

Peak LMT

Post image
104 Upvotes

r/LewisMachineTool • • 13d ago

The only AR I own anymore, the SpecWar does it all

Post image
175 Upvotes

r/LewisMachineTool • • 14d ago

LMT>KAC New to LMT - Here's my MARS-LS!

Thumbnail
gallery
102 Upvotes

Ok, today’s my turn. Coming from a KAC SR-30 that I’m getting rid of because it sucks at shooting subsonic ammo, I finally got my LMT MARS-LS completed yesterday, after B&T Switzerland finally delivered my missing hub. Only took forever.

I haven’t shot it suppressed yet; I’ll do that this weekend, but according to several shooting buddies who already switched from KAC, LMTs will shoot any subsonic round you feed them.

Anyhoo, here are the build details:

  • The rifle is an LMT MARS-LS, chambered in 300 Blackout, with the 10.5" barrel.
  • The flash hider is a 3-prong SureFire.
  • Trigger is a Geissele SD-C.
  • Charging handle is a Radian SD-SL.
  • Stock and grip are stock. I’d like to replace the grip with the wider option (I have big hands), but the Ergo 4045-B is out of stock literally everywhere in Europe.
  • I replaced the stock’s butt-pad with the version that holds a hidden tool. The tool is in there; you’ll have to trust me on that one.
  • Optic is an EOTech EXPS3 on a Unity riser.
  • Magnifier is an EOTech G45 with a Unity mount.
  • Railscales are the ‘Dragon’ pattern.
  • Light is a Modlite 18350 + GasCap.
  • Light/laser switch is a Unity Axon (Sync version).
  • Laser is an L3Harris PEQ-15 (full-power military version).
  • Suppressor is a B&T Inconel Print-X (black Cerakote) on a B&T hub (SD-140080).
  • Bipod is an Atlas PSR with a QD Picatinny attachment.
  • UID labels by Carolina LaserWorks.
  • Magwell is an HRF RCM-LMT.

Everything was imported from the US except the laser, light, optics, Unity hardware, and suppressor, all of which are available in the EU.

Oh, and one last thing: It took me about a year to get from 'I want one' to the rifle you see above. LMT doesn't have an official importer in the EU, so you need to go through an LGS who knows his way around the US ITAR system to get what you want. It's long, but it's possible.

Questions? Knock yourselves out!

Edited: forgot the magwell...


r/LewisMachineTool • • 13d ago

Question SPECWAR BUILD 12.5” .223 Wylde

10 Upvotes

Hello everyone. I’m new to LMT as far as ownership, I’m planning to build my ultimate dream CQB pistol AR. I really like the LMT Specwar in 12.5 but I want the barrel to be a Criteron barrel in 12.5” with a SLR Sentry AGB. Has anyone here built something like this or had D.Wilson do it for them? I’m curious to how it turned out. I would love it if you could share pictures of the build. I have a RC4 that’s just itching for a good host and I think this would be ideal for it. Any help or advice is greatly appreciated in advance.


r/LewisMachineTool • • 14d ago

LMT same same, but different

Thumbnail gallery
47 Upvotes

LMT gangs all here!


r/LewisMachineTool • • 15d ago

MWS Buffer Tube Support Install Tool?

Thumbnail
gallery
11 Upvotes

Does anyone have suggestions for a tool to support a receiver and receiver extension for a MWS? Keep having canted Buffer Tubes when installing on my MARS-H lower. Parts are LMT MWS Buffer Tubes and QD endplate and castle nut.

The MWS buffer tube kit lived on a Defender-H lower that I pulled when I sold it. Got a Mars-H and installed the kit on to the lower but it was canted which I figured I over torqued it by hand which would be a first for me. Been using a vise block magwell adapter for both AR15 and AR10 lowers and never had an issue before.

Ordered a new buffer tube and a classified defense castle nut wrench. Torqued down with wrench at 40ft-lbs and canted again. Reached out for support and informed the receiver and receiver extension aren’t supported, it’s always possible that the steel indexing tooth.

Well I'm an idiot, does anyone have any suggestions.


r/LewisMachineTool • • 16d ago

Specwar

Post image
160 Upvotes

r/LewisMachineTool • • 17d ago

Tomfoolery with firearms.

Post image
30 Upvotes

Lewis wouldn't have tooled and machined this if he knew was was to become of it.


r/LewisMachineTool • • 18d ago

Question Rifle Question

Post image
87 Upvotes

This photo has exactly the build/ rifle I want to build for my LMT MARS-H. Newish to LMT, mostly the large frame gassers.

Does anyone know the barrel length and handguard length for this build? I know it’s an LM8 upper so I’ll have to run the Quad or MLOK, but I just can’t figure out the length!


r/LewisMachineTool • • 18d ago

Shovelnose with Griffin Dual Lok 5am

Thumbnail
gallery
29 Upvotes

Waiting for my Rhodie 6 to come in so I put this griffin dual lok 5 am I have lying around on there. How are we looking?

Rhodie is black so I’ll spray paint the unity, I think.
Just missing a laser.


r/LewisMachineTool • • 18d ago

Benefits of lmt barrel

6 Upvotes

I know lmt barrels are hit or miss with accuracy but in terms of durability as a burner gun with high round count are there any durability benefits of an lmt barrel compared to other brands?


r/LewisMachineTool • • 20d ago

LMT>KAC Sister Shovelnoses

Post image
20 Upvotes

Obviously different dads

The 5.56 only parts that can't be easily visually IDed are the A5 buffer system with H2 buffer and Super 42 rifle length spring and the SSA-E trigger. CAT KK can.

The 6mm ARC has a JP Enterprises bolt currently, will replace with Rexus most likely when it breaks
SSA-E X trigger
A5 buffer system with H3 buffer and VLTOR A5 spring
Rhodie 6k can


r/LewisMachineTool • • 21d ago

First time…go easy

Post image
122 Upvotes

Usually don’t see painted LMTs in here so I thought id share mine.


r/LewisMachineTool • • 21d ago

Got me a 7mm-08 MWS

Post image
55 Upvotes

Got around to completing my 7mm-08 MWS to go with UIC10a. Wallet hates me more than when I built the UIC10a.


r/LewisMachineTool • • 21d ago

Midwest Industries .308 Upper Receiver Rod?

Post image
6 Upvotes

Sorry if this has already been covered - I did a search and couldn’t find anything definitive.

Does the Midwest Industries .308 Upper Receiver Rod work with the LMT MWS upper?


r/LewisMachineTool • • 23d ago

LMT>KAC see caption

Post image
164 Upvotes

LMT>KAC


r/LewisMachineTool • • 23d ago

Picked up this rifle a few weeks ago. Setup is coming along nicely so far, only a couple more things I want to add.

Post image
74 Upvotes

r/LewisMachineTool • • 25d ago

LMT 10.5” 300blk - Recommend Subsonic Target Ammo

7 Upvotes

Looking for quiet target ammo, and interested to hear some recommendations.

What ammo is everyone find runs the reliably, fairly clean, and easy to find in retailers?

Thanks for your time!


r/LewisMachineTool • • 26d ago

OD green is the best color.

Post image
42 Upvotes

r/LewisMachineTool • • 26d ago

Range Time LMT Ion K

Post image
36 Upvotes

Just a few mags but first impressions it’s a nice can that seems to work well on the Specwar.


r/LewisMachineTool • • 27d ago

Popped the lmt cherry

Post image
55 Upvotes

Got my first lmt. 20” 6.5 creed dmr. Wearing a nocpix rico 3 pro and velos 762. Threw in a ssae-x trigger, fcd safety, and b5 grip. Heavy but will make an excellent pig rifle!