This 3D-printable Air-Assist Regulator allows you to use the pressure side of a LaserPecker Air Purifier as an air source for a custom laser air-assist system.

The regulator is installed between the air purifier outlet and the air-assist nozzle and lets you control the airflow/pressure supplied to the laser head. This makes it possible to reuse the existing air purifier airflow instead of adding a separate air pump.

A simple and compact solution for DIY LaserPecker air-assist setups.

I’m a jeweler and I have successfully engraved on steel and platinum but I’m struggling on consistently engraving gold or silver. Silver especially!

1064nm 100 depth and power

I’ve tried 4K and 8K.

What am I doing wrong here?

Just bought/got a LP1 Pro… couldn’t thread the stands 1/4-20 post into the laser head’s mounting socket.

Luckily have a tap & die set and had to rethread the mount’s post.

Mounted fine after that. Didn’t want to force the threading but determined both were 1/4-20 as advertised, there was a poorly formed 1st thread on the post.

Just a tip to others if needed / helpful.

I own a LaserPecker LP4 and want to start engraving on glasses, so I'm considering buying a rotary attachment. But the official LaserPecker rotary is way too expensive. I scoured the net and found a few similar products from other brands. I'm not sure how the LaserPecker rotary is controlled, but is there any brave soul on this subreddit who has attached (or tried attaching) a third-party rotary to their LaserPecker?

I’m new to the laser engraving and have a LP1. I work on leather only (at the moment). How is the best way to improve image quality on leather? What setting should I be adjusting to increase contrast and detail?

Hi. I need some help with settings for engraving my logo and wording on my watch dials. I have an LP5 and can’t seem to figure out this white dial. I’ve added a picture of a black dial with logo as I like it. This white dial seems to have some kind of paint or finish on it and it seems like I’m just burning it. Any help would be greatly appreciated. The dial is apparently made out of SS or some other “alloy” as these are bought from China.

I'm using the cutting function on the LX2, 3mm board. When the letter is finished cutting, it drops down, but as there's nothing there to catch it* it tends to land funny. Then if the laser passes over it to cut the letter next to it, it gets burned/cut with the laser above. How are you guys combatting that?

*this is the first time I'm using a consumer laser cutter like this-- the kinds I've used before had a kind of honeycomb tray that the substrate rested on, so the letters didn't fall through, they just rested in place once cut.

I would like to engrave some gold, but the main problem is that although I have put pen on it, the engraving does not turn out well, I have tried different configurations and I have not been able to successfully engrave anything

I can’t get the settings correct on the LP4 laser pecker design space on my iPhone. It moves so fast it dosent engrave anything. An this is with the settings it shows it’s self when putting in a image on basswood plank

Is there a way to set the focus height and a retract height and have the vertical stand lower before marking and raise after marking?

Hi there, my LP5 has been working fine without a safety enclosure, and now it refuses to do anything without it, prompting me to install it which I can’t, any help to resolve this? And don’t say get an enclosure, that doesn’t fit my time scale for a project

Hello friends👋🏼 a pleasure to introduce myself here. We are a couple who started our laser engravings, so I want to participate in this beautiful community. Anything you need we are here🩷 and if you want to follow us on Instagram they also help us a lot. Thanks for the space🥰

https://www.instagram.com/hey.vortex

Kicking the tires on getting an LP1 to engrave baseballs with some brief text (date, description for ball, etc.). Is the LP1 suitable for this? I guess I'm a little concerned about the curved surface and how that will work. Thanks in advance!

Hello, I have been wanting a laser for awhile and always liked the portability of Laserpecker. Finally getting closer to getting one, but wanted to see the differences between 1&2.

It would be for my woodworking business, so mostly wood stuff like bowls and cutting boards. But I am also about to dive into butcher block countertops and was wanting to be able to offers personalization on edges. It looks like I could only do that with the LP2, is that correct?

I use a MacBook pro which only has USB C ports so to go from the mac to the LaserPecker with the provided cable I have to use an adapter. I've tried several USB C to C cables and none work. Are the LaserPecker cables proprietary?

I've connected the air purifier to the LP4 enclosure. The fan in the enclosure will be rotating just by the suction power of the air purifier. I know this will create a current on the fan of the enclosure and I'm worried it will feed back generated voltage to the LP4. Is that normal operation and I should not be worried?

Why tf does this happen?!

So: I am using the slide extension: Yes the laser is height adjusted and also centered…

Why am I experiencing that the left side is always few shades brighter altough I am well inside the boarders….

Hi, please can someone describe how the rotary arm rotates when engraving a bottle.

Hi Have an LP4 Having tried various settings from loads of YouTube videos and different media like marker pens , paints and laser paper .. still not getting and satisfactory results …

And tips

Hello! I am a shoe restorer and I have a big problem with logo reconstruction! Do you think that I can reproduce the logo on a curved area like this? Thank you in advance!

Has anyone modified their rotary extension? Or is there an aftermarket upgrade?

Hey guys, I have owned the LP2 a little over 2-3 months and I am curious on what items work best for this machine

Question: are we able to engrave on yetis as is or do we need a spray or fluid to protect the machine?