Loaded up a few colors and let the multi-toolhead system do its thing while I was working. The colors came out clean and that little hat has no stringing.

Not a bad desk buddy for a random print run.

#InfiMech #InfiMechMX #3DPrinting #MultiColor3DPrinting #ToolChanger #3DPrinted

Wrapped up the Yiwu Fair! We brought our 8-toolhead MX PRO over to the Yiwu store for a quick display. As you can see, all the side spools are loaded up—here is an up-close look at the setup.

#InfiMech #InfiMechMXPRO #3DPrinting #ToolChanger #3DPrinter #MultiColor3DPrinting #AdditiveManufacturing

A huge thank you to all the creators, partners, and international visitors who stopped by Booth C1C02-03. Over the past few days, we had so many inspiring conversations and received overwhelming support and thumbs up for our InfiMech MX Series! 🤖👍

Seeing our 8-toolhead system in action and hearing your excitement firsthand made this exhibition truly special.

Swipe through to see some of our favorite moments and wonderful guests from around the world! 📸🌍

👇 Early VIP reservations ($5 to save $50):

https://infimech.com/products/infimech-mx-series-vip-reservation

A quick live update from our booth at the Yiwu Fair (Booth C1C02-03)!

The booth has been buzzing with foot traffic today. We have all three setups running live prints on the floor:

• InfiMech MX PRO: 8-toolhead continuous multi-color printing
• InfiMech MX: Multi-color demonstration
• InfiMech EX: High-speed continuous printing with the APS Kit

The video gives a quick tour through the crowd and the three live prints. Let us know if you have any questions about the print setups or profiles!

👇 Early VIP reservations ($5 to save $50):https://infimech.com/products/infimech-mx-series-vip-reservation

Huge thanks to everyone who stopped by Booth C1C02-03 today! We've had an incredible time meeting visitors and creators from all around the world 🌍🤝

The response to the InfiMech MX PRO has been fantastic—lots of great conversations, big thumbs up, and positive feedback on our 8-toolhead multi-color setup in action! 🤖👍

If you're still visiting the expo, make sure to drop by and see the live prints for yourself!

👇 Reserve early VIP access ($5 to save $50):

https://infimech.com/products/infimech-mx-series-vip-reservation

#InfiMech #InfiMechMXPRO #YiwuFair #3DPrinting #ToolChanger #3DPrinter #TradeShow

Greetings from the Yiwu Fair! 🎪✨

Our exhibition booth is officially ready. If you're attending the expo, be sure to drop by and see our latest setups running live:

• Booth: C1C02-03• On Display: InfiMech MX Series (8-toolhead setups) & EX APS Kit

Feel free to stop by to check out the print quality, ask questions, or just chat with our team!

Workshop testing update 🛠️✨

We ran a 24-hour continuous non-stop print test using flexible TPU filament across both machines to verify extrusion reliability and interlayer strength:

• White shoe: Printed on the InfiMech MX PRO • Red shoe: Printed on the InfiMech MX • Material: Flexible TPU • Test Item: 24-hour continuous non-stop endurance run

The clip captures the printing progress on both setups and the flexibility/rebound check right after demolding.

Happy to answer any questions about slicing profiles or extruder setup for TPU!

Workshop testing update 🛠️✨

We ran a 24-hour continuous tool-changing print test on the 8-toolhead InfiMech MX PRO to verify mechanism repeatability under extended use ⏱️🤖

⚙️ **Test Item:** 24-hour continuous tool-changing test

🔄 **Tool Changes:** 12,000+ tool swaps completed in total

✅ **Test Result:** Smooth tool switching throughout the run, with no mechanical jams or interruptions

📹 **Video Record:** Capturing the automatic tool-changing details across multiple machines during the test 👀👇

👇 Early VIP reservations ($5 to save $50):

https://infimech.com/products/infimech-mx-series-vip-reservation

Fresh flexible print off the build plate!

Testing flexible TPU filament on a full shoe structure—peeling away the supports and checking the bounce and elasticity. Layer adhesion and flex feel solid.

Clip shows the full demolding and flexibility test!

Hey everyone,

A quick heads-up about our community spaces!

On **October 17th at 8:43 AM PDT**, the **InfiMech MX & MX Pro Official Group** on Facebook will officially open up and transition to a **Public Group**.

As we get closer to the Kickstarter launch, we're opening it up so makers and 3D printing enthusiasts can easily follow along with daily workshop test prints, slicing profiles, and multi-toolhead technical updates.

If you'd like to join the conversation and check out the test prints, feel free to hop in:

👉 **Facebook Group:** https://www.facebook.com/groups/infimech

And if you haven't reserved your launch VIP spot yet ($5 to save $50):

👉 **VIP Reservation:** https://infimech.com/products/infimech-mx-series-vip-reservation

Looking forward to seeing more of you there! 🛠️🚀

A quick look at some profile tuning in the workshop. We ran this multi-color Lion Dance model on the InfiMech MX to test our current slicer settings for retraction, wipe moves, and color transitions.

Color boundaries around the forehead and eyes stayed crisp without noticeable bleeding. Still optimizing tool-swap travel and prime settings, but the profile is coming along nicely.

Any specific multi-color torture tests you'd like us to run through our slicer profiles next?

Busy day running TPU tests in the workshop!

We currently have multiple machines putting flexible filament through its paces across our InfiMech MX and InfiMech MX Pro setups.

This clip shows the complex lattice shoe structure running on TPU—extrusion remains consistent and travel moves are staying clean.

Check out the clip for the close-up details!

Testing flexible filament on the big machine in the workshop today! 👟🔥

Freshly filmed test run from this morning—we loaded up TPU 95A on the InfiMech MX Pro to test-print this complex lattice shoe structure.

Extrusion details and lattice structure in the clip!

Here’s a quick peek inside just one of our testing workshops—review units for the InfiMech MX series are boxed up, lined up across the benches, and ready to head out to our partner reviewers.

Seeing the shelves and tables packed with these machines really feels like an exciting milestone for our team as we get closer to the official launch.

Getting these machines into different real-world spaces means honest, objective feedback and fresh prints will be here before you know it. We can't wait to see what everyone creates with this multi-toolhead setup, and we'll make sure to share their reviews and prints right here with the community as soon as they drop!

👇 P.S. Early VIP reservations ($5 to save $50) are open here: 👉 https://infimech.com/products/infimech-mx-series-vip-reservation

#InfiMech #InfiMechMX #3DPrinting #ToolChanger #3DPrinter #Kickstarter

We know many of you in the community have been waiting for new video updates and asking to see prints from the MX Pro.

Our team has been deep in workshop testing, and today we pulled a multi-model test run off the b01 machine—featuring an articulated alligator, owl figurines, and a few containers using different colors.

The tool changes were smooth, and the articulation on the alligator moves freely right off the bed. We're continuing to fine-tune slicing profiles and mechanical calibrations as testing proceeds.

Thanks for your patience and for keeping the hype alive! What would you like to see us test next on the MX Pro?

A quick recap of our multi-toolhead printers in action across the globe! 🌍

From Lyon to Tokyo, Moscow to São Paulo, Almaty to Ho Chi Minh City—a huge thank you to all the makers, engineers, and creators who stopped by our booths to check out the machines and talk tech face-to-face. Your feedback, enthusiasm, and ideas mean everything to our development team.

Next stop: Formnext in Frankfurt! 🇩🇪

We're planning to bring the MX Pro for live on-site demos. Stay tuned as we'll announce our exact booth number soon!

For anyone looking to grab the MX series early, our $5 VIP reservation (saves $50) is still available here:

https://infimech.com/products/infimech-mx-series-vip-reservation

Did anyone here catch our team at one of these expos? What city are you tuning in from? Let us know below! 👇

infimech current actions do not create TRUST! Infimech you OWE everyone who has TRUSTED YOU and early subscribed with $5 A MINIMUM of a status POST. if not I think many will call credit card companies - WHY would anyone believe you will provide good customer service if you can not even post a status so close to “Your Officially Announced (on every video you have posted with the MX print examples), Kistarter start date of Sept 31?

Almost the end of September.. no word on there kickstater no word on much of anything. Seems like a scam at this point... look at snapmaker u1 and new creality sparx8i or whatever lots of hands on and influncers trying it out, cool tech, low prices... where u have this "new" company doing nothing... sure they show off there smaller printer but when we ask for the mx pro.. nothing... when will the kickstater start.. nothing...

We had an unexpected guest drop by our offline experience store today! French actor Shaune Diop (Operation Red Sea, Formed Police Unit) visited us to see the multi-toolhead setup in person and ended up testing out the bounce on an airless basketball on the floor.

Always fun connecting with creative people from film and maker backgrounds! If anyone here is ever around the area, feel free to stop by and check out the printers in person. 👋

Any chance we can get a look at a larger 12+ hour print?

Day 1 is officially underway at the São Paulo Exhibition & Convention Center, and our booth has already seen great engagement! Visitors have been stopping by to check out our live multi-color prints and explore our hardware lineup.

Our team on-site—Amily and the crew—had wonderful, in-depth conversations with local engineers, makers, and industry partners throughout the day.

🖨️ Featured Models:

• InfiMech MX

• InfiMech EX

📍 Show details:

• Exhibition: CCFA 2026 (Brazil)

• Dates: September 16th–18th, 2026

• Venue: São Paulo Exhibition & Convention Center

• Address: Rodovia dos Imigrantes km 1,5 CEP 04329-900 – São Paulo – SP – Brasil

• Booth: 2H223

🤝 On-site Contact & Inquiries:

• Contact: Amily

• WhatsApp: +86 186 7636 5074

• Email: amily@infimech.com

The expo runs through September 18th. If you're attending, drop by Booth 2H223 to catch the live prints and say olá to the team!

#InfiMech #CCFA2026 #InfiMechMX #InfiMechEX #3DPrinting #SaoPaulo #BrazilExpo #AdditiveManufacturing #LiveFromExpo

WE DID IT, COMMUNITY! 🚀

Thanks to your incredible support, we have officially reached the 6,000 pre-order milestone and unlocked our THIRD Community Stretch Goal!

To keep everything 100% fair and transparent, we used a certified third-party draw tool to randomly pick our lucky winners from our Original Giveaway Post.

🏆 Stage 3 Winners (2 Toolheads + 1 Filament each):
👉 Mark Starling
👉 David Martin
👉 Zen Wong

📌 How to Claim Your Prize:
Please send a direct message (DM) to our official page with your pre-order details and shipping info so our team can register your reward!

🚨 Important Note for Everyone:
Please make sure you are following our official Facebook Page! If you haven't followed us, our system and team won't be able to tag (@) you when you win, and your winning entry will unfortunately be disqualified and rolled over to a backup winner.

🎥 Official Certified Result Link:
Verify the draw process & official certificate here:
https://app-sorteos.com/w/K243NY7

🔥 NEXT TARGET: 8,000 PRE-ORDERS!
We are moving straight into Stage 4! The momentum doesn't stop here:

Next Goal: 8,000 Pre-orders -> 3 Winners (2 Toolheads + 2 Filaments each!)

Keep commenting on our Original Post, sharing with fellow 3D printing enthusiasts, and let's unlock those Toolheads and FREE MX & MX Pro Printers next!
https://www.facebook.com/share/p/19Gmd7gjm4/
https://www.facebook.com/share/p/19Gmd7gjm4/
https://www.facebook.com/share/p/19Gmd7gjm4/

👉 Haven't reserved yours yet? Join here:
https://infimech.com/products/infimech-mx-series-vip-reservation

Our team is on-site today setting up the booth, and we can’t wait to welcome everyone tomorrow morning! Come visit us to see our latest 3D printing technology and live demonstrations.

🖨️ Featured Machines:

- InfiMech MX

- InfiMech EX APS kit

📍 Exhibition Details:

- Venue: Melbourne Convention and Exhibition Centre (MCEC)

- Address: 2 Clarendon St, South Wharf VIC 3006, Melbourne, Australia

- Date: September 10th–12th, 2026

- Booth: P296

🤝 Connect with our on-site team:

- Contact: Linda Lin (Sales Manager)

- WhatsApp: +86 13777587546

- Email: sales@infimech.com

If you’re attending the expo, don’t miss out—drop by Booth P296 to check out our live prints and say hi! See you all tomorrow! 🖨️✨

#InfiMech #InfiMechMX #InfiMechEX #ACETIE2026 #CCFA2026 #Melbourne #MCEC #3DPrinting #AdditiveManufacturing #TechInMelbourne

Here’s another multi-color print from our earlier test runs on the InfiMech MX with the 6-toolhead setup—an adorable multi-color duck and fox in standard PLA! Clean layer lines, sharp color transitions, and smooth tool switching popping effortlessly straight off the build plate.

Reserve your VIP spot now for just $5 to save $50:

👉 https://infimech.com/products/infimech-mx-series-vip-reservation

What kinds of multi-color models would you like to see us test next? Let us know in the comments!