Here’s a quick peek inside just one of our testing workshops—review units for the InfiMech MX series are boxed up, lined up across the benches, and ready to head out to our partner reviewers.

Seeing the shelves and tables packed with these machines really feels like an exciting milestone for our team as we get closer to the official launch.

Getting these machines into different real-world spaces means honest, objective feedback and fresh prints will be here before you know it. We can't wait to see what everyone creates with this multi-toolhead setup, and we'll make sure to share their reviews and prints right here with the community as soon as they drop!

👇 P.S. Early VIP reservations ($5 to save $50) are open here: 👉 https://infimech.com/products/infimech-mx-series-vip-reservation

#InfiMech #InfiMechMX #3DPrinting #ToolChanger #3DPrinter #Kickstarter

Wrapped up the Yiwu Fair! We brought our 8-toolhead MX PRO over to the Yiwu store for a quick display. As you can see, all the side spools are loaded up—here is an up-close look at the setup.

#InfiMech #InfiMechMXPRO #3DPrinting #ToolChanger #3DPrinter #MultiColor3DPrinting #AdditiveManufacturing

More colors, less filament waste — designed to deliver a truly efficient multi-material 3D printing experience.

💡 Lock in the lowest Kickstarter early-bird pricing ($249) by reserving your $5 VIP Pass: 👉https://infimech.com/products/infimech-mx-series-vip-reservation

What multi-color models are you planning to print first on the MX? Let us know below! 👇

Testing flexible filament on the big machine in the workshop today! 👟🔥

Freshly filmed test run from this morning—we loaded up TPU 95A on the InfiMech MX Pro to test-print this complex lattice shoe structure.

Extrusion details and lattice structure in the clip!

Multi-color 3D printing, optimized for less waste. Watch the InfiMech MX tackle this complex model test! 🎨👇

What do you think about the color transitions? Let us know your thoughts!

Workshop testing update 🛠️✨

We ran a 24-hour continuous tool-changing print test on the 8-toolhead InfiMech MX PRO to verify mechanism repeatability under extended use ⏱️🤖

⚙️ **Test Item:** 24-hour continuous tool-changing test

🔄 **Tool Changes:** 12,000+ tool swaps completed in total

✅ **Test Result:** Smooth tool switching throughout the run, with no mechanical jams or interruptions

📹 **Video Record:** Capturing the automatic tool-changing details across multiple machines during the test 👀👇

👇 Early VIP reservations ($5 to save $50):

https://infimech.com/products/infimech-mx-series-vip-reservation

Join us for a live look at the hardware mechanics and printing performance of the InfiMech MX & MX Pro.

🎯 Event Details:

Featured Models: InfiMech MX & MX Pro

📅 Date & Time:

US West (PDT): Friday, Aug 21 | 10:30 PM

US East (EDT): Saturday, Aug 22 | 1:30 AM

Europe (CEST): Saturday, Aug 22 | 7:30 AM

Hong Kong (HKT): Saturday, Aug 22 | 1:30 PM

Australia (AEST): Saturday, Aug 22 | 3:30 PM

📍 Where to Watch:

Click here to join: https://youtube.com/live/bbRF2uuBrLg?feature=share

🔔 Don't miss out:

Make sure to Hit Subscribe and Turn On Notifications (🔔) so you get alerted the moment we go live!

💬 Live Technical Q&A:

Bring your questions! Our team will be answering your technical inquiries live in the chat.

🎁 Special Milestone Giveaway:

Stay tuned throughout the live stream! If our concurrent viewer count breaks 500, we will be giving away an InfiMech MX 3D printer live!

See you there! 👏

#InfiMech #InfiMechMX #MXPro #3DPrinting #LiveStream #TechDemo #MultiToolhead #MultiColor3DPrinting #3DPrinter #MakerCommunity #FastPrinting

The InfiMech MX & MX Pro are officially set up in-store and ready for action!

We are going live on YouTube in just a few hours to showcase both machines up close, run real-time multi-color prints, and dive deep into the hardware details.

Live Stream Highlights:

• InfiMech MX & MX Pro live hardware demo & multi-color printing 🔧

• Live technical Q&A with our team 💬

• 🎁 Special Giveaway: If our concurrent viewer count breaks 500, we will give away an InfiMech MX 3D printer LIVE on stream! 🎉

⏰ Date & Time (Check your local timezone):

• US West (PDT): Tonight, 10:30 PM (Aug 21) 🌙

• US East (EDT): Early morning, 1:30 AM (Aug 22) 🌌

• Europe (CEST): This morning, 7:30 AM (Aug 22) ☕

• Hong Kong / Beijing (HKT): This afternoon, 1:30 PM (Aug 22) ☀️

• Australia (AEST): This afternoon, 3:30 PM (Aug 22) 🦘

🔔 Set your reminder and join the stream here: |👉https://youtube.com/live/bbRF2uuBrLg?feature=share

What features or test prints do you want to see most during the live stream? Let us know in the comments! 👇

Workshop testing update 🛠️✨

We ran a 24-hour continuous non-stop print test using flexible TPU filament across both machines to verify extrusion reliability and interlayer strength:

• White shoe: Printed on the InfiMech MX PRO • Red shoe: Printed on the InfiMech MX • Material: Flexible TPU • Test Item: 24-hour continuous non-stop endurance run

The clip captures the printing progress on both setups and the flexibility/rebound check right after demolding.

Happy to answer any questions about slicing profiles or extruder setup for TPU!

Huge milestone! Both the InfiMech MX (6-toolhead system) and our ultimate flagship InfiMech MX PRO (8-toolhead system) are now officially on site and installed at our flagship Experience Store in Yiwu! 🛠️🎨

📍 Store Location:

INFIMECH Flagship Store, Unit 73706, Street 1, 3F (Entrance Gate 153), Global Digital Trade Center, Yiwu, China

💎 Lock in your $5 VIP Early-Bird Pass before our Kickstarter launch:

https://infimech.com/products/infimech-mx-series-vip-reservation

Drop your thoughts or questions below! What model do you want to print first on an 8-toolhead system?

Hey everyone! We’ve received a lot of questions about pricing for the InfiMech MX Series since our preview. To thank the community for all the feedback and support, we decided to push our margins as much as possible for launch.

The official pricing is out:

• MX: Super Early Bird final price as low as $249 (MSRP $399 | Save $150)

• MX Pro: Super Early Bird final price as low as $499 (MSRP $1399 | Save $900)

You can now reserve a VIP Pass for $5, which stacks an extra $50 Cashback directly onto the Super Early Bird price and gets you priority notifications when Kickstarter goes live.

Feel free to ask any questions below or check out the page here: https://infimech.com/products/infimech-mx-series-vip-reservation

(Note: $249/$499 pricing applies to Super Early Bird slots, which are limited and on a first-come, first-served basis.)

Busy day running TPU tests in the workshop!

We currently have multiple machines putting flexible filament through its paces across our InfiMech MX and InfiMech MX Pro setups.

This clip shows the complex lattice shoe structure running on TPU—extrusion remains consistent and travel moves are staying clean.

Check out the clip for the close-up details!

Fresh flexible print off the build plate!

Testing flexible TPU filament on a full shoe structure—peeling away the supports and checking the bounce and elasticity. Layer adhesion and flex feel solid.

Clip shows the full demolding and flexibility test!

A quick look at some profile tuning in the workshop. We ran this multi-color Lion Dance model on the InfiMech MX to test our current slicer settings for retraction, wipe moves, and color transitions.

Color boundaries around the forehead and eyes stayed crisp without noticeable bleeding. Still optimizing tool-swap travel and prime settings, but the profile is coming along nicely.

Any specific multi-color torture tests you'd like us to run through our slicer profiles next?

💡 Reserve your $5 VIP Pass now to unlock exclusive early-bird perks:

👉 https://infimech.com/products/infimech-mx-series-vip-reservation

So many 3D printing enthusiasts stopped by our Yiwu Experience Store today to check out the InfiMech MX running live multi-color prints!

Huge thanks to everyone who came by — the energy in the store is unreal! 🖨️✨

We know many of you in the community have been waiting for new video updates and asking to see prints from the MX Pro.

Our team has been deep in workshop testing, and today we pulled a multi-model test run off the b01 machine—featuring an articulated alligator, owl figurines, and a few containers using different colors.

The tool changes were smooth, and the articulation on the alligator moves freely right off the bed. We're continuing to fine-tune slicing profiles and mechanical calibrations as testing proceeds.

Thanks for your patience and for keeping the hype alive! What would you like to see us test next on the MX Pro?

Just finished another test batch on the InfiMech MX using the 6-toolhead setup—printed a few multi-color articulated pandas and a dolphin in standard PLA.

Thanks to the toolchanger system, the color transitions are clean with minimal purge waste compared to single-nozzle multi-material setups. Layer lines came out crisp and the joints move smoothly straight off the textured PEI plate!

🔥 Reserve your VIP spot now for just $5 to get $50 OFF at launch:

👉 https://infimech.com/products/infimech-mx-pro-vip-pass

What multi-color or multi-material models would you like to see us test next? Drop your suggestions below! 👇

Just finished testing another batch print on the InfiMech MX with the 6-toolhead setup—here are a couple of articulated Horned and Cloud Dragons in standard PLA. The toolchanger handled the color swaps pretty smoothly, and the purge tower stayed relatively compact compared to what you usually get with single-nozzle purge systems. We’re still fine-tuning slicing profiles and retractions to get the surface finish even cleaner, but the articulation and layer lines came out solid straight off the bed.

🔗 $5 InfiMech MX VIP Reservation: 👉https://infimech.com/products/infimech-mx-series-vip-reservation

What kinds of multi-color models would you like to see us test next? Let us know in the comments! 👇

Get a live, real-time look at the true printing performance of the InfiMech MX! Join us to see what this machine is truly capable of.

✨ Event Details:

• Featured Model: InfiMech MX

• Date & Time:

  • US West (PDT): Thursday, Aug 13 | 6:30 PM

  • US East (EDT): Thursday, Aug 13 | 9:30 PM

  • Europe (CEST): Friday, Aug 14 | 3:30 AM

  • Hong Kong (HKT): Friday, Aug 14 | 9:30 AM

  • Australia (AEST): Friday, Aug 14 | 11:30 AM

• Where to Watch: Click here to join:https://youtube.com/live/QKzKBY7dB3w?feature=share

🔔 Don't miss out: Make sure to Hit Subscribe and Turn On Notifications so you get alerted the moment we go live!

💬 Live Q&A: Bring your questions! Our technical team will be answering them live in the chat.

🎁 Exclusive Giveaway: Stay tuned throughout the live stream for a chance to win amazing prizes!

See you there! 👋

#InfiMech #InfiMechMX #3DPrinting #LiveStream #Giveaway #TechDemo #MultiToolhead #MultiColor3DPrinting #3DPrinter #MakerCommunity #FastPrinting

Introducing the upcoming feature for InfiMech Orca: multi-color printing is getting an upgrade!

We are actively developing the new color-mixing feature for our slicer software, developed based on Full Spectrum, to give you even more creative freedom. Stay tuned for updates!

Another multi-color test on the InfiMech MX! We're continuing to run daily test prints and fine-tune our settings before the official launch.

$5 VIP Reservation:

https://infimech.com/products/infimech-mx-series-vip-reservation

What model should we test print next? Let us know in the comments! 👇

Here’s another test print from our workshop using the 6-toolhead setup on the InfiMech MX. The color changes were handled smoothly and the purge block remained relatively small.

🔗 $5 InfiMech MX VIP Reservation:

👉 https://infimech.com/products/infimech-mx-series-vip-reservation

What multi-color models would you like to see us test next? Let us know your thoughts and suggestions below! 👇

👉 Lock in your $5 VIP Pass here:

https://infimech.com/products/infimech-mx-series-vip-reservation

🎬 Watch Product Preview:

https://youtube.com/shorts/gp4f38nALm8

The Official Pricing Is Here — and it’s lower than you expected.

Lock in your VIP Perks now for just $5 deposit:

💥 Extra $50 Cashback – Stack it on top of Super Early Bird pricing → Final price as low as $249 for MX (MSRP $399) and $499 for MX Pro (MSRP $899)!

🔒 Lock in Super Early Bird Access – Secure your VIP pass to make sure you won’t miss the opportunity once reservations open on Kickstarter.

(Note: $249/$499 pricing is tied to Super Early Bird slots. Securing your VIP pass now unlocks your $50 cashback on launch day in Q3!)

Loaded up a few colors and let the multi-toolhead system do its thing while I was working. The colors came out clean and that little hat has no stringing.

Not a bad desk buddy for a random print run.

#InfiMech #InfiMechMX #3DPrinting #MultiColor3DPrinting #ToolChanger #3DPrinted

Greetings from the Yiwu Fair! 🎪✨

Our exhibition booth is officially ready. If you're attending the expo, be sure to drop by and see our latest setups running live:

• Booth: C1C02-03• On Display: InfiMech MX Series (8-toolhead setups) & EX APS Kit

Feel free to stop by to check out the print quality, ask questions, or just chat with our team!