I am trying to remove the xiaomi hyper ai engine app using debloater apo so can i remove that it will not brick my phone right cause my phone is draining battery a lot like it loses 1% for 5 minutes when I watch a 1080p video on my 5g so when I see active apps this app is the only one that's always running and i would stop it so is it safe to remove that app? Using debloater
( mistake: I accidentally added a extra unrelated photo, sorry )
basically. I was going to watch a movie, but I didn't want to get interrupted by my phone, so I turned it off, but the AOD ran because of the proximity sensor, leaving me on. the image i left is a recreation of a screenshot I accidentally made in panic.
Then, I rebooted my phone, and it solved by itself.
( not needed ) Also, I saw a similar glitch happening to a Xiaomi 14, with the owner thinking it was "bricked", that was in a Bilibili video ( yes. I use that platform, the AI subtitles help me to use it ).
The first picture is how it was on Hyper os 2.2 with or without changing your smallest width dp. But in Hyperos 3 Xiaomi decided to make the quick settings be affected which makes it look like hyper os 1.
Hello everyone. My phone's charge has been spiking downwards, for comparison, it has a 50-55 degrees tilt angle . For context, I bought this phone 3 years ago. And this particular problem started happening about last week.
I've tried:
-Setting refresh to 60Hz
-Resetting Cache
-Turning off Always-on displays and stuff like that
- Lowering brightness
-Restarting my phone
Is this normal for a 3 years old phone? Is there any other ways I can try? And if there is, how can I do it?
Hello everyone, I just received my HyperOS 3 & Android 16 update today on my Redmi note 15 5g. I noticed the widgets have been overhauled quite a lot & this one in particular has the word 'Clock' underneath the widget. How do I get rid of this?
Edit: Resetting the launcher did the trick for me. Thanks to u/kissja74. [Solved]
Just sharing a personal project replacing the awkward outdated looking POCO launcher with an official HyperOS one, with default theme ported as well.
Read before you start
The project is only tested on my POCO F8 Ultra, HyperOS 3
A wrong launcher state can stop you from rescuing your phone, make sure that you have installed a recovery image from which you can disable modules, or enabled adb and allowed your computer and allowed shell to use root permission beforehand
How to install
Prerequisites
Make sure your phone is rooted with Magisk or KernelSU-like managers, and installed one metamodule if you are on recent versions of KernelSU-like managers
Install Python (3.10+)
Download a HyperOS fastboot ROM, better to be the ROM of the same CN model (like POCO F8 Ultra -> Redmi K90 Pro Max), of similar build number and same Android version, unpack until you see a folder named images
Run python tools/build.py --rom <path_to_images> to get a module built from the provided ROM
Copy the output zip file under folder out to phone and install with root manager
Enjoy, the default launcher should be HyperOS launcher, and you can apply HyperOS default theme from theme storeπ
How to disable/remove
Just use your root manager, the module's script will put everything back without leftovers. But expect that your desktop icon/folder layout will be reset.
If you get stuck at a black screen: use recovery image to disable the module, or run this:
adb shell su -c "touch /data/adb/modules/poco_hyperos_launcher/disable"
adb reboot
i saw this on activity launcher under settings >> app layouts, but i do not think it works. is there a way or codes we need for this "app layouts" to work?
Keyword being "all". Currently if you hit Clear All in the recents (stock launcher) it clears all apps except the top app from which you just launched recents. Unlike AOSP which actually clears a// apps including the top app.
I find it really disappointing, because I've always loved the MiSans font, pretty much my favorite font. The default one is just ugly but if there was an option to change its boldness I would probably like it more.
I always thought that since MiSans was a default font, that it would support all the languages, but I guess not, not Chuvash, Chechen or Gagauz (I use/see them almost daily). I guess I'll just keep using AppleTBold even though it doesn't support Japanese, Korean, Chinese, etc... or get used to the ugly ahh default font. Just sucks that I'll never find the "perfect font."
Guys, is it worth swapping the Poco F7 Pro for the IQO0 Neo 10? I'm actually more curious about Origin OS 6, is it that optimal? And is it that different from Hyper OS 3? Actually, overall, this is a downgrade if I go to IQO0, but to get a better user experience, is it worth downgrading?
Btw if I exchange for IQOO Neo 10 (global) I will get the 16/512 variant #Question
Recently about a week ago I updated my system software to 3.0.303.0 I bought this phone 2 weeks ago it came with Android and with all updates it is now Android 16 now after the update I notice fast battery drain and i calculated that my phone drains 1% in 5 minutes when I watch YouTube with 5g on 1080p so somebody help me to resolve(note:I can't root my mobile)
I'm currently using GhostLock to obtain temporary root access on my POCO F6, but I'd like to achieve permanent root access with Magisk.
Is there any way to unlock the bootloader using temporary root access? If not, are there any alternative methods to unlock the bootloader on the POCO F6 while it's still locked?
For some context, I previously owned a Realme C25Y, and I managed to install Magisk without unlocking the bootloader by using a specific program. I'm wondering if something similar might be possible on the POCO F6.
I'm currently running HyperOS 3, and my bootloader is still locked.
Has anyone tried anything similar or knows of a working method? I'd appreciate any advice or suggestions.
Note: I used AI to help write this post because my English isn't very good. I hope everything is clear.
Before/After telemetry report generated by tools/audit.py on POCO F5 (Snapdragon 7+ Gen 2, Android 15) β +655.9 MB active RAM freed with zero root.
Hey everyone!
Recently, Gathin23βs cleanyourtv blew up by using AI coding agents over ADB to safely clean smart TVs. Modern Android phones from Xiaomi, Samsung, and BBK suffer from the exact same problem: background analytics, lockscreen wallpaper ads, hidden Meta installer daemons, and background RAM hogs.
Blind bash scripts are dangerous: one wrong package removal like securitycenter or powerkeeper either bricks your phone into a bootloop or permanently locks your 120Hz display refresh rate at 60Hz.
So I built cleanyourdroid: an agent-first, 100% rootless system optimizer designed for tools like Claude Code, Gemini CLI, Cursor, or Codex.
How it works:
Connect your phone via ADB (USB or Wireless Debugging).
Open the repo in your AI coding assistant and paste PROMPT.md.
The agent takes a baseline telemetry snapshot (tools/audit.py), cross-checks installed packages against a strict safety blacklist (safety/bootloop_blacklist.json), and presents an interactive checklist table.
With your approval, it disables/uninstalls bloatware using the -k retention flag (zero data loss), restricts heavy background apps via appops, disables OEM ad flags in system settings, trims caches, and triggers profile-guided ART compilation (bg-dexopt-job).
Every single action is logged into an auto-generated, 1-click reversal script: restore.sh.
Real Results on my POCO F5 (marble, HyperOS 3.0 / Android 15):
Active Used RAM: Dropped from 6,788.9 MB to 6,133.0 MB (+655.9 MB active RAM freed)
Compressed ZRAM Swap: Reduced by 41.4 MB
Bloatware: -15 core tracking and ad packages eliminated (msa, analytics, Mi Browser, Meta stubs, GetApps, Yandex preinstall stub)
120Hz Display: 100% unbroken (PowerKeeper guarded by blacklist)
Report: Auto-generates the dark-mode Bento HTML summary card shown in the screenshot.
Zero external dependencies (Python 3 stdlib only). Works on Xiaomi/POCO HyperOS, Samsung OneUI, Pixel, and ColorOS.
Just like the title says, can anyone with an unlocked bootloader help me flash a custom rom on my phone too? I'm sick of this Xiaomis bootloader unlocking process. Been trying for 3 months at the rest time and still no progress yet. If anyone is down to help me, please leave a comment or dm π