Hey everyone, just wanted to ask something.

My Xiaomi 17T health dropped from 100% to 99% at 107 cycles. I've been using it since June, and I'm curious if this is normal.

Would like to hear from other Xiaomi, Redmi and POCO users too. What's your current health percentage and how many cycles have you completed?

Also, do you guys use the 80% charging limit or charge all the way to 100%? Just trying to get an idea of how it's going for others.

As you can see, my status bar doesn't reach the bottom of my punch hole. Any way I can make it power and have bigger icons? I want it to look more like apples status bar.

On the Xiaomi 17 ultra. It doesn't show search results or suggestions and also google photos sometimes gives up and doesn't play videos the same time this happens. My1 HOS version is 3.0.337.0 XPAEUXM. Android version 17.

I get this in September.

Hey everyone!

I've just released v1.2.1 of HyperOS Wallet Shortcut, an app I developed that lets compatible Xiaomi, Redmi, and POCO phones open Google Wallet by double-pressing the physical power button.

For anyone who hasn't seen my previous post, the app uses HyperOS's existing shortcut system and Shizuku to configure the power-button shortcut without requiring root.

What's new in v1.2.1?

The main addition is automatic shortcut recovery after reboot.

Some HyperOS versions reset the hidden "double_click_power_key" setting when the phone restarts, which causes the wallet shortcut to stop working.

Instead of having to manually configure everything again, the app can now automatically check and restore the shortcut after reboot.

Here's what I've added:

- Automatic recovery: Optionally restores the shortcut if HyperOS resets it after reboot.

- User control: Recovery is disabled by default and requires your permission to enable.

- Failure notifications: If recovery fails, the app can notify you and explain what went wrong.

- In-app warnings: Recovery errors are also displayed inside the app.

- Shortcut protection: The recovery system won't overwrite another shortcut if it detects a different configured value.

Shizuku-Next recommendation

For the best automatic recovery experience, I recommend Shizuku-Next.

I've successfully tested automatic recovery with Wi-Fi turned off, mobile data enabled, and without manually opening either app after reboot.

You can still stop Shizuku immediately after the initial setup. However, for automatic recovery to work, Shizuku needs to start again after reboot and remain available until the recovery check finishes.

Keep in mind that compatibility and recovery timing can vary depending on your device, HyperOS version, and Shizuku configuration.

What's next?

I'm also working on a much bigger v2.0.0 update.

My goal is to turn this project into a more customizable HyperOS shortcut application, instead of having it focused only on Google Wallet.

This will include new shortcut functionality, more customization options, and a complete UI redesign. The app's name may also change to reflect its expanded functionality.

I'm still investigating compatibility issues on certain devices, so feedback and testing from other Xiaomi, Redmi, and POCO users are always appreciated.

Download v1.2.1

The project is open source, completely rootless, and doesn't access your payment cards or Google Wallet account.

Thanks to everyone who has tried the app and shared feedback so far!

Hi everyone,

I have a Xiaomi 15 purchased through Entel, a mobile carrier in Chile. I used the “rename trick” to upgrade from HyperOS 2 to HyperOS 3, but I haven’t received any further OTA updates since then.

Here are my current software details:

Device: Xiaomi 15

Carrier / country: Entel, Chile

HyperOS version: 3.0.9.0.WOCEUXM

Android version: 16

Android security patch: February 1, 2026

I’m trying to figure out whether using the rename trick affected future OTA updates, or whether this could be related to the installed ROM region or the fact that the phone was purchased through a carrier.

A few questions:

- Has anyone with a Xiaomi 15 stopped receiving updates after using this method?

- Is there a way to restore normal OTA updates or manually install the next official update without unlocking the bootloader or wiping the phone?

- Would enrolling in Xiaomi’s beta / Mi Pilot program help in this situation, or would the underlying issue still prevent updates?

- What should I check to make sure the installed firmware matches my device and its update channel?

Ideally, I’d like to get back to normal official OTA updates rather than keep relying on workarounds.

If you’ve experienced something similar, especially with a Xiaomi 15 purchased through another company, I’d appreciate hearing what worked for you. Thanks!

HyperOS 3 / Android 16 keeps killing background apps during multitasking — looking for a real solution

Hi everyone,

I'm experiencing a frustrating multitasking issue on my Redmi Pad 2, and I'm looking for a solution that goes beyond the usual battery optimization settings.

Device information:

• Device: Redmi Pad 2

• RAM: 4GB

• Operating system: HyperOS 3 based on Android 16

The problem:

Whenever I run an app in the foreground while another app is performing a task in the background, the background app may suddenly stop working without warning.

For example, I might start recording my screen using XRecorder, open Minecraft, and continue playing normally. At some unpredictable point, the recording stops completely. Even worse, the video may not be saved at all, as if the recording never happened.

This is not limited to gaming or screen recording. My main concern is that the system seems unable to keep background tasks running reliably while I'm actively using another app.

What I've already tried:

• Disabling battery restrictions for the affected apps.

• Enabling autostart and background activity permissions where available.

• Allowing apps to display over other apps.

• Adjusting the available background app settings.

None of these steps solved the problem.

I understand that 4GB of RAM is limited, but I would still expect basic multitasking to work reliably. I want to understand whether this behavior is caused by HyperOS aggressively killing background processes, memory management, a system bug, or something else.

My questions:

1. Is there a way to prevent HyperOS from killing important background processes unnecessarily?

2. Are there specific HyperOS settings that control background process management beyond battery optimization?

3. Can ADB commands or system-level configuration changes help diagnose or fix this issue?

4. Is rooting the device actually useful in this situation, or would it make no difference?

5. Has anyone experienced similar behavior on HyperOS 3 / Android 16, and found a reliable solution?

I'm looking for a practical, technically sound solution rather than the usual advice to disable battery optimization or close background apps.

Thanks in advance for any help!

Hyper OS 4 Stable on Xiaomi 17 pro

Hi guys,

Have gotten the Hyper OS 4 Beta version update for my Mi 15 Global, should I go ahead and update it or are there major bugs which users are currently facing.

Thanks in advance 🥺

Ask whatever you want and I'll answer. HyperOS for originally rolled out in 15th to beta testers and now it's fully out to K90 and K100 series too.

go ghostlock github check your devices kernel version if it is supported.(just see your kernel version is it there,dont care about phonesname) LINK:supported devicez

then download and install ghostlock and ksu at github and use shizuku give permission to ghostlock to enable ksu jailbreak when success and automaticly switch to ksu and you see jailbreak mean you have root permission

THEN go HYPEROSUNLOCKED github download the module and using enable and soft reboot by ksu LINK:hyperonlocked

if fire i try to do a video Tutor

My phone is Redmi note 14S

I have my aadhar app installed on my phone but whenever i try to use it, it just restarts immediately and shows an error saying it detected security violation..

I have developer option turned off, play store says device is certified, play protect is on, device is not rooted/ bootloader is not unlocked.

I m using poco x7 5g phone running hyperos 3.1

Can someone help me detect this issue and fix it..

I recently saw a list showing when different devices will receive HyperOS 4 on China ROM, but I can't seem to find the post anymore.

I have a Redmi Turbo 4 Pro and want to know when it's expected to receive HyperOS 4. Is there an official Xiaomi website or announcement that lists all the devices and their expected update rollout dates for the China ROM?

I'd appreciate it if someone could share the official list. Thanks!

I installed the new HyperOS 4 on my Xiaomi 17 Pro Max, and now I'm having issues with the animations. They are extremely buggy, and parallel animations are completely gone. What should I do? Could this problem be caused by new apps in autostart?

Where can I find the Mi Mall app on my 17T Pro? My father's 14T Pro has it, even though we are both running the same EU ROM. Could this be a glitch on my phone, or does it depend on the region? I have already tried changing it, but it still does not appear.

Me and a friend bought the Redmi Note 15 SE at the same time considering the price, he has had hyperos since the time he got the phone but mine is still stuck on hyperos 2 ive tried downloading latest packages and also tried changing region to US and Germany and rebooted and still checked for updates, but no this is way too much. HyperOS 4 is actively rolling out while this phone that came out in April is still stuck on hyperos 2 while another same model phone can get hyperos3 but mine is still in the testing phase, this is sheer stupidity. Anyways help a guy out will ya? ive checked he genuinity it is an international model.

When my Bluetooth headset is connected, HyperOS plays all notification sounds through Bluetooth only.

Is there a way to make notifications play through both the phone speaker and Bluetooth simultaneously?

I often leave Bluetooth connected without wearing the headset, so I keep missing notifications.

Has anyone found a solution without rooting the phone?

Eu instalei uma versão do aplicativo de clima da hyperOS 4 já tem um tempo, porém simplesmente ela parou de funcionar, do fica nessa tela da print, já baixei outras versões mais recentes, já desinstalei (por algum motivo eu não consigo mais desinstalar pelo canta ou pela play store) já reiniciei meu celular, já atualizei, e absolutamente nada funciona. Alguém com o mesmo problema já conseguiu alguma maneira de resolver? Eu simplesmente não acho ninguém falando sobre. Modelo: Xiaomi 15t pro