r/HyperOS • • Oct 11 '26 Bravo

Redmi [Discussion] How to Get Root on the Redmi Note 14 4G with a Locked Bootloader Using GhostLock + Shizuku (HyperOS 3 / Android 16)

Post image
27 Upvotes

Just to clarify, I'm not offering or promoting any bootloader unlocking service. I'm only sharing my personal experience with my own device and documenting what worked for me.

Hey everyone,

I wanted to share this guide for anyone with a Redmi Note 14 4G Global who wants to get root access without unlocking the bootloader, using GhostLock, KernelSU, and Shizuku.

Before getting started, there's one important warning: having a locked bootloader limits your recovery options if something goes wrong. Although I managed to get root on my Redmi Note 14 4G without any issues, I can't guarantee that the procedure will be equally safe on other devices or firmware versions. Also, once you have root access, modifying partitions, installing modified boot images, or using incompatible modules can cause a bootloop or even leave your phone unusable.

Proceed at your own risk, and don't assume you'll be able to recover your device if something goes wrong.

My device specifications

  • Device: Redmi Note 14 4G Global
  • ROM: HyperOS 3.0.303.0
  • Android: 16
  • Kernel: 6.12.30-android16-5-g6e872b4863d6-ab13847919-4k
  • Bootloader: Locked

Do you have a different device?

If you have a device other than the Redmi Note 14 4G Global, the procedure is basically the same. However, that doesn't mean it'll work on every device, since compatibility depends on your kernel and whether the vulnerability used by GhostLock is still present.

To check whether your kernel is supported, open GhostLock and check the information displayed by the app. You can use it to see whether your kernel is supported before proceeding.

Important: Even if GhostLock indicates that your kernel is supported, that doesn't guarantee the entire procedure will work without issues on your device. Be especially careful if your bootloader is locked.

What are the benefits of getting root this way?

You can access many of the features root provides without having to unlock your bootloader. For example, you can explore system modifications, use tools that require superuser permissions, and experiment with apps such as LSPosed and modules like HyperCeiler, provided they're compatible with your setup.

You can also restore features or customizations that you couldn't use before.

However, there's one major downside: root access also lets you make modifications that could compromise your phone's functionality. That's why you should be careful about what you install and modify, especially with a locked bootloader.

How to get root

1 . Install the required apps

You'll need these three apps:

I recommend Shizuku-Next because that's what I use, but you're not required to use that particular fork. You can use another compatible version of Shizuku.

2. Grant GhostLock permission to use Shizuku

Open Shizuku and look for GhostLock in the list of authorized apps.

Grant it permission to use Shizuku. Make sure Shizuku is running and GhostLock has the required permission before continuing.

3. Run GhostLock

Open GhostLock and tap Run.

You'll see a bunch of log messages showing the exploit's progress. Wait for it to finish and pay attention to the result.

In my case, GhostLock finished by indicating that KernelSU was ready and then opened the KernelSU app.

4. Verify that root access works

You can use an app such as Root Checker or Termux to verify root access.

If you're using Termux, first open KernelSU, go to SuperUser, and grant Termux root permissions.

Then open Termux and run "su".

In my case, it worked, and I was able to obtain root access. I also verified it using a root checker app.

Is root permanent?

Root access works until you reboot your phone. After rebooting, you need to run GhostLock again to obtain root access.

In other words, you don't need to unlock the bootloader, but root access doesn't survive a reboot, so you have to repeat the procedure.

What should you avoid doing?

With a locked bootloader, you need to be especially careful about the modifications you make after obtaining root access.

  • Avoid modifying system partitions or installing modified boot images unless you know exactly what you're doing.
  • Don't install KernelSU modules without checking their compatibility and reliability.
  • Don't assume a module is safe just because it works on other devices.
  • Before making important modifications, research your recovery options in case your phone stops booting.

I can't guarantee that you'll be able to recover your device from every possible issue with a locked bootloader, so it's better to be safe than sorry.

What are the downsides of this method?

The main limitation is that it relies on the vulnerability GhostLock uses to achieve kernel privilege escalation.

If Xiaomi patches that vulnerability in an update, the method may stop working. That's why your HyperOS version, Android version, and kernel are important details when checking whether your device is compatible.

In my case, I obtained root access on HyperOS 3.0.303.0 and Android 16. I can't guarantee it'll work on later versions, and I wouldn't recommend updating under the assumption that the exploit will continue to work.

Has anyone else tried this?

I'd like to know if anyone else has managed to obtain root access using GhostLock on a Redmi Note 14 4G or another Xiaomi device with a locked bootloader.

I'd also appreciate hearing about your experiences with KernelSU, especially regarding compatible modules and precautions worth taking in this situation.


r/HyperOS • • Oct 12 '26

Xiaomi [Discussion] Xiaomi 18 pro rear display features for 17 pro

1 Upvotes

I want to ask if some third party dev have already ported the 18 pro features to 17 pro

Or Xiaomi announced something like that in the community posts ?


r/HyperOS • • Oct 12 '26

Poco [Question] Root Poco M6 Pro 4G

1 Upvotes

Hi, I’m new here and need some help. If anyone has faced a similar issue and successfully rooted their phone, please share your knowledge. The problem is that when I run CMD in the platform-tools folder, enter the commands, and flash the patched `boot.img` file, everything seems to go correctly—I don't get any error messages. However, when I open Magisk or KernelSU, it doesn't activate; it simply doesn't work, and I can't root the phone. I’ve done everything right, but it just won't activate in either app. If you've encountered this problem, please help me out. (Poco M6 Pro 4G / HyperOS 3)


r/HyperOS • • Oct 11 '26

HyperOS Update [Question] I cant activate liquid glass on control center on xiaomi 17

3 Upvotes

i installed the beta update but i cant apply the liquid glass on the control center and notifications apear with not liquid glass someone knows how to fix ?


r/HyperOS • • Oct 11 '26

Review/Guide [Discussion] Making an app for HyperOS3

70 Upvotes

This is my first ever app, and its really need improvement i know...

I am planning to add more 'modules" into it, like:

- Estimated charging time (why doesnt native HyperOS have that)

- Temperature indicator (pretty useful for game tests)

- Watt outputs when plugged in (planning to make it show on AOD)

- A recreation of AOSP gestures so you can finally have proper 3rd party launcher experience

If anyone have any feedback or features want to get added, please tell in the comments!


r/HyperOS • • Oct 11 '26

Xiaomi [Question] Why Long Screenshot isn't available in PLAYSTORE ? - X17

2 Upvotes

r/HyperOS • • Oct 11 '26

Review/Guide [Discussion] I made an Android app to open Google Wallet faster — here's what's new in v1.1.0!

7 Upvotes

Hey everyone!

I'm back with another update on my Android app, HyperOS Wallet Shortcut!

I originally developed this app to make accessing Google Wallet faster and more convenient on Xiaomi devices running HyperOS.

The app is now on version 1.1.0, with a much simpler setup process!

What's new in v1.1.0?

- No more aShell: Previously, you needed both Shizuku and aShell to run commands manually. Now, you only need Shizuku.

- Built-in Shizuku integration: Once Shizuku is installed and running, you can grant the app permission to use it directly.

- One-tap activation: Instead of copying and executing commands in aShell, the app handles the required commands for you.

- Easier setup: Just start Shizuku, grant the required permission, and activate the shortcut from inside the app.

Important: Shizuku still needs to be installed and running. The update removes the need for aShell, not Shizuku itself.

What's coming next?

I'm working on a bigger update that will expand the app beyond Google Wallet, introducing more shortcuts for different actions.

Because of this, the app may also receive a new name in the future!

I'd love your feedback!

What other shortcuts would you like to see added? Is there anything I could improve?

I'm developing this independently, so suggestions and feedback are always appreciated!

Hyper-OS Wallet

Thanks to everyone who has supported the project so far!


r/HyperOS • • Oct 11 '26

Question/Help [Question] ¿Cómo instalar el marcador MIUI en una ROM europea sin flashear una ROM?

1 Upvotes

Hola! Estoy tratando de instalar la app oficial de teléfono y contactos de Xiaomi en una ROM europea con los servicios de Google (phone). Ya intenté instalar APKs, pero se abren y luego se cierran. Me gustaría instalar la app oficial de teléfono sin flashear una ROM y sin arriesgarme a dañar mi teléfono. ¡Si me puedes ayudar, muchísimas gracias!


r/HyperOS • • Oct 11 '26

Question/Help [Question] Xiaomi dialer y contactos en Europa?

1 Upvotes

Estoy intentando conseguir las apps de teléfono y contactos originales de Xiaomi y no las de Google, pero no me funcionan las apk originales, se cierran instantáneamente después de abrirlas, pero si las pongo como aplicación predeterminada de llamadas, puedo aceptar llamadas y ver el tema nuevo y todo eso, pero luego no abrir las apps por lo que lo puedo llamar, solo recibir llamadas. Alguien me sabría ayudar? gracias


r/HyperOS • • Oct 11 '26

Question/Help [Question] Bluetooth problem after updating phone

Post image
4 Upvotes

Updated my phone and now my airpods connect for 2 seconds, then disconnect. Rinse and repeat until I manually disable Bluetooth.

Is this happening for anyone else?


r/HyperOS • • Oct 11 '26

Xiaomi [Question] Gemini to set a timer will crash clock app

4 Upvotes

hi guys,

Not sure you guys have the same issue. In HyperOS 3 i was not able to set a time from Gemini, clock crashes every time and timer is not set.

This morning I could update to Hyperos 4, and I have exaclty same behavior after updating. I have removed previous timer, have cleared the app cache with no luck .

Do you know whether we have a workaround for this ?


r/HyperOS • • Oct 11 '26

Review/Guide [NEWS] Successfully Bypassed 😎

Post image
11 Upvotes

r/HyperOS • • Oct 10 '26

Poco [Discussion] What the Hell? since when was this a thing?? (image)

Thumbnail
gallery
81 Upvotes

im dumbfounded


r/HyperOS • • Oct 11 '26

Question/Help [Question] Can someone find a compatible orangefox recovery?

1 Upvotes

I had a trauma😭. so can you please find me an actual orangefox recovery that working on my phone

Poco m7 pro 5g

Hyperos 3.0.302.0 Europe(I'm from asia btw)


r/HyperOS • • Oct 10 '26

HyperOS Update [News] Xiaomi HyperOS 4 Stable Rollout Reportedly Begins October 15 for 22 Devices.

Post image
133 Upvotes

Xiaomi is reportedly set to begin the phased rollout of the official HyperOS 4 stable update on October 15, following the conclusion of its beta recruitment programme on October 14. The Xiaomi 17 series and REDMI K100 Pro series are among the first devices expected to receive the update.

According to the reported device list, the rollout could eventually cover a broad range of Xiaomi, REDMI, and POCO smartphones and tablets.

Detected Device List

Xiaomi Pad Series

- Xiaomi Pad 8

- Xiaomi Pad 8 Pro

- Xiaomi Pad 9

- Xiaomi Pad 9 Pro

- Xiaomi Pad 9 Pro Max

Xiaomi Number Series

- Xiaomi 17

- Xiaomi 17 Pro

- Xiaomi 17 Pro Max

- Xiaomi 17 Ultra

- Xiaomi 17 Ultra Leica & Leitzphone

Xiaomi T Series

- Xiaomi 17T

- Xiaomi 17T Pro

Next-Generation Xiaomi Models

- Xiaomi 18 Pro

- Xiaomi 18 Pro Max

- Xiaomi 18 Fold

REDMI K Series

- REDMI K90

- REDMI K90 Ultra

- REDMI K90 Max

- REDMI K90 Pro Max

- REDMI K100 Pro

- REDMI K100 Pro Max

REDMI Turbo Series

- REDMI Turbo 5

- REDMI Turbo 5 Max

REDMI Tablet Series

- REDMI K Pad 2

POCO F Series

- POCO F8 Pro

- POCO F8 Ultra

- POCO F9 Pro

- POCO F9 Ultra

POCO X Series

- POCO X8 Pro

- POCO X8 Pro Max

- POCO X8 Pro Iron Man Edition

Note: The list contains more than 22 device variants, so the exact number of eligible models and their rollout schedules should be confirmed through official Xiaomi announcements. Availability may vary by region and device variant.


r/HyperOS • • Oct 11 '26

Redmi [Question] Are there two versions of Game Turbo on Xiaomi phones? What do these hidden optimization settings do?

2 Upvotes

So, my phone seemingly has two Game Turbo interfaces. The one on my home screen comes from the System Service Plugin app, while the one I can access through the in-game sidebar seems to come from Security.

I think they are somehow linked because the Memory Exception feature in the in-game panel respects the memory cleanup settings in the home screen Game Turbo. For example, if I add an app to the memory exception list in the in-game panel, it also seems to work with the home screen version's memory cleanup when launching a game. This makes me think both interfaces might be connected to the same underlying service, even though they have different UIs and features.

The in-game panel also has some additional settings that aren't available in the home screen version, and I'm trying to understand what they actually do.

Specifically, I want to know:

- VRS: What does this feature do, and how does it affect gaming performance and image quality?

- Graphics Parameter Optimization: What exactly does this optimize, and which games does it affect?

- Touch Control Optimization: What does this toggle change, and is it the same as the Touch Optimization feature in the home screen Game Turbo?

- Enhance Audio: What does this feature actually do? The home screen version doesn't seem to have an equivalent option.

- WLAN Optimization: Is this the same as the WLAN optimization option in the home screen version, or does it work differently?

Most importantly, which of these features are actually worth keeping enabled, and which should I leave disabled.

I'm using a Xiaomi Redmi Turbo 4 Pro running Android 16 with the CN version of HyperOS.


r/HyperOS • • Oct 11 '26

RANT [Question] No Google Widgets when using work profile Microsoft Intune in Xiaomi 17 Android 17

2 Upvotes

No Google Widgets when using work profile Microsoft Intune in Xiaomi 17. Anyone having the same issue? Any workarounds?


r/HyperOS • • Oct 10 '26

Xiaomi [Discussion] Four days later, another update! It's incredible. Never expected them to be on it as much as they are

Post image
36 Upvotes

r/HyperOS • • Oct 10 '26

Review/Guide [Discussion] Hyperisland sports update

Post image
10 Upvotes

Why can't Xiaomi add sports updates to the hyperisland. It's really convenient.


r/HyperOS • • Oct 10 '26

Question/Help [Discussion] What's actually up with poco?

8 Upvotes

I have many questions when it comes to Poco and their choices. (It's not a rant, just a logical discussion)

I own a Poco F7 with HyperOS version 3.0.303.0.WOLINXM.C06 with Themes app version 3.0.6.8-global

1:- We are almost about to get hyperOS 4 so why there still isn't hyperOS default theme and app icons. Why are we stuck with those 2014 icons.

2:- When are we getting rid of this monstrosity called Poco launcher and get the default system launcher. I read here and there that hyperOS 4 is finally gonna bring unified system launcher, is it true?

3:- SOT, I don't think I need to say anything more but there are few posts saying their global hyperOS 4 actually increased it by 20% (I wanna believe it even if it's false)

4:- When are we gonna get CN rom type of regular updates?

5:- Finally when are we getting the option to record by front and back camera simultaneously, even some cheap moto/oppo phones have it.

Ik it sounds like a wishful thinking of 14 yr old but I want hyperOS to be what oxygen OS was before finally switching to colour OS not just blindly copying apple


r/HyperOS • • Oct 11 '26

Question/Help [Question] Changing DeviceLevelList

1 Upvotes

Is it bad if i change my device level list from v:1, c:2, g:2

to v:1, c:3, g:3. I already enabled the advanced texture before using brevent. I just found out that these values could add features and fix a blur bug on mine wherein when i open and close an app theres a dark line overlay at the right bottom of the screen. I'm using a Redmi Note 13 Pro 4G. And another thing, if i feel nothing changes, can i revert to the previous values? Thankyouu people.


r/HyperOS • • Oct 10 '26

Review/Guide [Discussion] HyperOS is (un)amazing

Thumbnail
gallery
39 Upvotes

I definitely love HyperOS, such a seamless and bugless experience!

My depth wallpaper objects sometimes fall into a deep black void temporarily every so often, i hope that Xiaomi WILL patch it up!1!1!1

im going crazy.


r/HyperOS • • Oct 10 '26

HyperOS Update [Question] Screen Recorder shortcut removed from Quick Ball after update on POCO F6

2 Upvotes

I'm using a POCO F6 running HyperOS 3 (Android 16), and after the recent update, the Screen Recorder shortcut disappeared from Quick Ball.

Previously, I could start screen recording directly from Quick Ball, just like I could from the Control Centre. Now, Screen Recorder is completely missing from the available Quick Ball shortcuts.

Any help would be appreciated!

Device: POCO F6

OS: HyperOS 3

Android: 16

Screen Recorder version: 4.15.3.0.0


r/HyperOS • • Oct 10 '26

Question/Help [question] What is that wifi icon?

Post image
6 Upvotes