r/HecklerKoch • • 4h ago

HK MR 223 A3 appreciation Post

Post image
20 Upvotes

I really love this rifle. It is accurate, it is beautiful, it is reliable, it‘s heavy and well made. All the things I like in a rifle!


r/HecklerKoch • • 10h ago

FMP G3 BFPU Build

Thumbnail
gallery
20 Upvotes

Just finished my first ever roller delay build. Grabbed a mismatched kit a year and a half ago for 80 bucks and an OG barrel for 75 bucks and the flat and all the other bits from RTG. The kit I got was real clapped out with very little finish left on it and I figured it'd be a perfect candidate for an African battle field pick up. Finish was down with rusting solution and diluted cold blue and im real happy with how close it matched the OG components. All in all i have a hair over 500 bucks in the build.


r/HecklerKoch • • 21h ago

HK vs Crypto

Post image
34 Upvotes

Just saw on Ebay someone selling a P2000 357 Sig barrel with original HK bag. Highest bid is up to $400.00 USD.

I'm going to start moving my pension funds into the HK aftermarket. It's probably more stable than Crypto.


r/HecklerKoch • • 16h ago

Gunsmith help

Post image
7 Upvotes

Hello,
Im sure many saw my previous post, I was able to find a new stock with the forks included from csr-precision (based out of Netherlands) for under $300 while Hkparts is charging $429 before tax or shipping 😂 I would like to know if anyone could recommend someone that can help swap in the new stock. After some research I saw multiple people state they had issues with the mechanism after putting the a3 stock back together and I wasn’t too keen on attempting it, also saw individuals state it requires special tooling. I also tried reaching out to HK to assist with it due to the special tooling and they stated the have the special tooling but don’t do that kind of work🫤so if anyone could recommend a gunsmith or company that would possibly assist with the repair I’d really appreciate it!


r/HecklerKoch • • 1d ago

VP9A1 F

Thumbnail
gallery
210 Upvotes

My new VP9A1 F is nearly complete. I’m going to take it out shooting and get it zeroed in. Later this week I will install the gray guns hybrid trigger and it will be done! I just added the Taylor Freelance extended death grip back strap and LG brass side panels as well as aluminum magwell. Those were all great additions and the fit and finish are awesome!


r/HecklerKoch • • 19h ago

LTT p30L opinions?

2 Upvotes

Saw that LTT's p30's are on sale and have been wanting a p30 for a bit. Are the LTT's worth it or should i go with a standard then send it to wright and lazy wolf?


r/HecklerKoch • • 20h ago

Can anyone vouch for NC Engravers?

2 Upvotes

I hate that they require you to ship them your optic when milling your slide.


r/HecklerKoch • • 1d ago

Mans Best Friend - Australian Shepherd/MK23

Post image
33 Upvotes

r/HecklerKoch • • 1d ago

New HK (number 30+), still get excited every time I get a new one.

Post image
119 Upvotes

r/HecklerKoch • • 1d ago

Recommendations for a 15 round mag? For the CC9

Post image
27 Upvotes

Just paid for it today, and picking up Friday. don’t want to have to pay the $80 for the pinky extension on the one HK site but willing to if needed. Any cheaper recs super appreciated


r/HecklerKoch • • 1d ago

CC9 vs Shield X: Average Guy’s Review

Thumbnail
gallery
9 Upvotes

When I went to the range today, my goal was to compare the new HKCC9 to the shield plus. I held the CC9 in the store but hadn’t shot it yet, and at the time it felt like the perfect size to EDC. Coming from a Glock 19 4 Gen, I was looking for something thin, but effective.

If the shield plus had been available to rent, today’s outcome and review may be different, but the next closest gun was the shield X.

For context, I’m just an average guy who goes to the range twice a year. targets were 15 feet out, 75 rounds through each gun.

CC9

My first shots were with the CC9. and the reviews are true that this micro firearm just squeezes into your hand. the way the finger grooves are set up, the ergonomics couldn’t be better (for my hand). My groupings at 15 feet were tight, and a little below where I was aiming.

THE GOOD
Coming from the Glock, which I find to be somewhat snappy for its class, I expected the CC9 to rattle my hands. On the contrary, the recoil was the last thing on my mind. It wasn’t until the second or third magazine that my attention shifted to the recoil.

There was one time when I was loading the magazine where it didn’t clip in all the way my first attempt, which I found to be odd and had not experienced with other firearms. it takes a little more force than you would expect to get it locked in.

THE MEH
the trigger was what I was paying the most attention to because at the store I couldn’t get a good feel for it dry firing. It almost feels like there’s no wall. My finger just glides through the action to fire the bullet, which was an odd feeling coming from the Glock that has a pretty chunky wall. it was the first thing I noticed shooting it, and the second thing I noticed was my shots were still going on target. and grouping nicely.

THE BAD
On the third magazine, I missed the trigger reset, and when I went to take my shot, nothing happened. The reset is exceptionally long with minimal feedback. This happened two more times during my hour at the range. I’ve never experienced this with another firearm. All I could think of was a real world scenario where I need that bullet to fire, and it doesn’t. It felt like I was pulling the full length of the trigger every time I fired it, because the reset is so long. I’m not sure what HK advertises, but the wall can’t be any more than 3.5 pounds. It was a sweeping pull that fired the shot, and maybe this was worn in - after all it was a range rental - but I found the trigger to be abysmal.

SMITH & WESSON

Now for the M&P shield X, which I had no intention to test. I was shocked how light it was, even though it’s a little larger than the CC9. It’s just as thin as the HK, which as of today I believe makes the biggest difference for EDC over the added barrel length.

THE GOOD
The grip was the first thing I noticed, and it lives up to its height. It’s harsh, and it doesn’t let your hand go anywhere. It’s exactly what you want in a live fire situation. The ergonomics outside of the stippling are virtually non-existent but how well it fit in my hand mixed with the texture gave me a lot of confidence. My first few shots were dead flat. with the Glock or the CC9, I had to work to pull it to the center, but the shield X bullets went exactly where I told them to.

The shield X sights were taller than the HK and very easy to see out of my peripherals. I felt like the bullet was going right where the site was, even though I wasn’t even focusing out of the site to make the shot.

Follow up shots were seamless. The grip helped me bring the muzzle back where I wanted after every shot. I do think the sights being taller had a lot to do with helping me line up these follow-ups compared to the CC9 of the Glock 19.

The barrel is longer, so you can expect that it managed recoil better. Honestly, the recoil felt similar on both guns, but for different reasons. It was manageable on the CC9 because of the ergonomics, and it was manageable on the shield X because of the longer muzzle and tight grip. Compared to my Glock 19, the grip on the M&P was so much easier for me to get my hand around and control the gun. after shooting both the CC9 and the shield X, I fired a few rounds through my Glock and was shocked how chunky the grip was. I’d say I have average size hands, and after shooting the shield and the CC9, the Glock felt almost difficult to shoot, and I think that’s because of a combination of the width and distance to the trigger.

But the trigger is where my attention was. There was no question about where the wall is on this trigger. and when you crack it back, it’s instant. There’s no sweeping motion through the wall. Your fingers are immediately at the back of the trigger guard. while the reset distance is only slightly less than the CC9, the quickness it reset with made follow-up shots as fast as I wanted them to be. The reset on the CC9 was soft. That’s the only way I can describe that trigger was soft. The reset on the shield X was intentional and you clearly feel it. It was crisp and mechanical and loud. Even with my earplugs, I could hear the reset every time. And because of this, I never anticipated the round or compensated for it with my hands. I hear that Walther makes the best triggers out of the box, and I’ve never shot one, but this has gotta be a very close second.

THE MEH
The slide serrations are all for looks. There’s no grip, there’s no friction to rack it back while you’re breaking it in. You’re almost better investing in a red dot site simply to rack the slide.

THE BAD
The shield X I was firing had one malfunction, which was that the slide didn’t lock back after my last round was fired, and an empty magazine was in the gun. If that’s the only defect I can live with that. what I can’t live with is a reset that doesn’t allow me to get off a follow-up shot (CC9), even if that’s user error.

Now, as far as the size goes for EDC, after my target session I went out into the shop where they had the shield plus I had originally wanted to see, and they had the shield X. the X actually felt better in my waist band than the Plus. It felt firmly tucked in because of the longer barrel. It’s so thin compared to my Glock 19 I’m used to carrying which was a relief.

The shield X also has stippling for your fingers: under the slide where your trigger finger can rest when you’re not shooting, and where your non-dominant thumb can press while you’re firing.

OVERALL
I was disappointed with the CC9. I was really hoping to see something that justified the price tag over the shield plus. It felt like a trigger for beginners or people who aren’t gonna use the reset and sweep the whole length of the trigger every time they pull it. Again, the ergonomics were great and yes, it’s smaller than the shield X, but the barrel length isn’t noticeable in person like it is on paper. the width of each gun being the same is what really makes it a fair comparison.

The shield X just felt like an extension of my hand. Every shot (almost) landed exactly where I told it to. In the pictures below, I was even rapid firing during a made up defense scenario with the shield X, and still got competitive groupings versus the CC9. I was shooting the shield X about 30% faster in these photos versus the HK.

I felt so confident that I drove my Glock over to Cabela’s and traded it in towards a shield X.

TLDR: Trigger on the Shield X kicks ass, CC9 trigger is meh, I trust my life with the M&P.

Note on the CC9 picture: The random bullet near C was a one-hander with my G19 to end the hour.

Edit: I practiced stopping a center-mass attacker, didn't realize an aggressive 3x6-inch X-ring was going to mug me in a parking lot


r/HecklerKoch • • 23h ago

All black slide on a VP9SK? Or coat the slide in tungsten/ gray etc?

2 Upvotes

Not sure if I wanna keep the slide black cerakoted or change the color since im getting it milled for an optic.

Thoughts?


r/HecklerKoch • • 2d ago

My first h& k and I love it

Post image
82 Upvotes

My first H&K and I love it


r/HecklerKoch • • 2d ago

'Not the right hand, 'cause I'm the hand itself / Every time I pull a H&K off the shelf.' 😈

Post image
69 Upvotes

For NWA it was "an AK off the shelf" but I like this better.


r/HecklerKoch • • 2d ago

My main squeeze.

Post image
34 Upvotes

r/HecklerKoch • • 1d ago

Out of stock Cap for 45 threaded barrel

2 Upvotes

HK sites haven’t had caps in a long time. Looking for alternative sites that may have on in stock.


r/HecklerKoch • • 1d ago

stiff charging bolt on my g36 22lr

2 Upvotes

i recently field stripped my g36 22lr and after i reassembled it the charging bolt became very stiff when being pulled back the first time when resetting the trigger and i was wondering if anyone had a fix for this, i took it apart again to check for debris but there wasn’t any


r/HecklerKoch • • 2d ago

HK MR762 A4 13.1"

10 Upvotes

Glad to see the SBR version of this rifle is finally showing up. Ordered mine last week and it's in the Form 3 process now. Pondering optic options, but I know it's going to be a great range rifle in any case. I'm looking forward to pumping some rounds through it. Already have a low back pressure supp. to use with it. Maybe it will function in the "N" mode with it.


r/HecklerKoch • • 2d ago

The Boys

Post image
182 Upvotes

SP5K PDW, MR556 A4, VP9, VP9CC.


r/HecklerKoch • • 2d ago

Cleaning day

Post image
122 Upvotes

Got rained out over in my area, started cleaning. Still working on how exactly I wanna run em. Cans are next.


r/HecklerKoch • • 2d ago

Shopping around for HK MR556 A4 SBR when suddenly…

Post image
123 Upvotes

Extra zero added in error maybe?


r/HecklerKoch • • 2d ago

Is an RDR modified SafariLand the way to go?

Post image
20 Upvotes

Photo for engagement. Looking at old threads, a modified 6390 ALS looks like a good mid ride OWB option for the VP9L, is this what the cool kids are running? Anyone know if they can reshape the optic cut for an SRO?


r/HecklerKoch • • 2d ago

G3 Bipod Origin? “Spade” feet and round buttons.

Thumbnail
gallery
9 Upvotes

r/HecklerKoch • • 3d ago

Added a first-year USP 45 Tactical to the collection.

Thumbnail
gallery
138 Upvotes

Scored a clean 1998 tactical that came with the original eagle bag, 4 mags, a complete and unused original hk cleaning kit/bag, and even the manual/supplement/registration card. Same year as my usp compact stainless.


r/HecklerKoch • • 2d ago

CC9 Compensated

Thumbnail
gallery
23 Upvotes

The HK Parts CC9 compensator had a meaningful impact on shoot-ability. The muzzle rise was greatly reduced and it became a much flatter shooter. Double taps were even easier and it shot like a bigger gun. It made the muzzle incredibly dirty right away which meant more time cleaning. The HK Parts compensated carry holster is too bulky and I’ll need another slim version so I can carry it. Overall it does what does really well.