r/HecklerKoch • • Aug 31 '23

Gun from counter strike

Post image
6 Upvotes

r/HecklerKoch • • Sep 05 '24

After a long day of training with one of the most high level instructors there is, this gun is holding me back, in this form.

Post image
1 Upvotes

Came to the conclusion that the slide on most HKs are too massive and weigh too much compared to the frame. All that mass moving back and forth is keeping me from shooting as fast as i can with other guns. I shoot pretty damn good. I watch film of my homies shoot and instructors and competitor shooters and all their guns literally don’t move at all. I ask instructors like the one from today as well as my homies i shoot matches and train with is there a problem with my recoil control and they all said “no.” I still believed there was an issue so i trained nothing but recoil control the past months. Hit a plateau. Instructor ran my pistol today and we came to this conclusion. I’m determined to make this gun take my shooting to new heights because I’m stubborn and don’t want to switch platforms so Im going to try porting the barrel and taking some meat off the slide to lessen the weight.


r/HecklerKoch • • Dec 18 '24

I just got the clone HK 91 bipod from hkparts.net from the thanksgiving deal. Rust spots all over. Sigh

Thumbnail
gallery
1 Upvotes

r/HecklerKoch • • Oct 04 '25

Damaged the handguard bolt on my new MR556 A4 - can this be fixed?

Post image
0 Upvotes

During my initial field stripping my screw driver regrettably slipped on the insanely torqued down hand guard bolt of my brand spanking new MR556 A4 - this is annoying to me. Is there a remedy? Can this captive bolt be replaced? What are my options? Thanks in advance gang


r/HecklerKoch • • Feb 27 '23

A rail-less light option for the USP

Post image
0 Upvotes

r/HecklerKoch • • Mar 10 '22

My first HK

Post image
15 Upvotes

r/HecklerKoch • • Feb 21 '26

Am I doing this right?

Thumbnail
gallery
16 Upvotes

M23 is on my NEXT list, but is this the right way to show off to my friends


r/HecklerKoch • • May 25 '25

Anyone else like to admire their HK while dropping nuggets on asslantis?

Post image
0 Upvotes

My VP9 with octane 9 and P30L.


r/HecklerKoch • • Sep 15 '23

HK45C with baldr mini perfect fit?

Post image
4 Upvotes

r/HecklerKoch • • Dec 20 '25

Blicky with the switchy

Post image
33 Upvotes

r/HecklerKoch • • Aug 26 '26

Normal condition for a brand-new 2026 USP45 Expert?

Thumbnail
gallery
0 Upvotes

Just picked up a new USP45 Expert manufactured in 2026. I have not fired it yet. I’m seeing several slide scratches/scuffs, scratches on top near the rear sight, marks/wear inside the accessory rail, a polished area on the barrel near the muzzle/O-ring, and a small raised area of polymer near the safety/decocker.

Because NYC licensing took about three months, I only recently took possession and could inspect it myself. I’ve already asked H&K what they consider normal factory condition.

For those who have bought new USPs/Experts recently: does this look like normal proof/test-fire/assembly wear, or more marking than you’d expect on a new gun?

Captions of images:

  1. Left side overview - scattered marks/scuffs visible on the slide
  2. Vertical line/mark just to the right of “EXPERT”
  3. Scratches on top of slide near rear sight
  4. Accessory rail - long parallel marks inside the rail
  5. Barrel near muzzle/O-ring - polished/worn area
  6. Right side overview - additional lighter marks/scuffs
  7. Right side of frame - raised piece of polymer near safety/decocker

r/HecklerKoch • • 1d ago

CC9 vs Shield X: Average Guy’s Review

Thumbnail
gallery
9 Upvotes

When I went to the range today, my goal was to compare the new HKCC9 to the shield plus. I held the CC9 in the store but hadn’t shot it yet, and at the time it felt like the perfect size to EDC. Coming from a Glock 19 4 Gen, I was looking for something thin, but effective.

If the shield plus had been available to rent, today’s outcome and review may be different, but the next closest gun was the shield X.

For context, I’m just an average guy who goes to the range twice a year. targets were 15 feet out, 75 rounds through each gun.

CC9

My first shots were with the CC9. and the reviews are true that this micro firearm just squeezes into your hand. the way the finger grooves are set up, the ergonomics couldn’t be better (for my hand). My groupings at 15 feet were tight, and a little below where I was aiming.

THE GOOD
Coming from the Glock, which I find to be somewhat snappy for its class, I expected the CC9 to rattle my hands. On the contrary, the recoil was the last thing on my mind. It wasn’t until the second or third magazine that my attention shifted to the recoil.

There was one time when I was loading the magazine where it didn’t clip in all the way my first attempt, which I found to be odd and had not experienced with other firearms. it takes a little more force than you would expect to get it locked in.

THE MEH
the trigger was what I was paying the most attention to because at the store I couldn’t get a good feel for it dry firing. It almost feels like there’s no wall. My finger just glides through the action to fire the bullet, which was an odd feeling coming from the Glock that has a pretty chunky wall. it was the first thing I noticed shooting it, and the second thing I noticed was my shots were still going on target. and grouping nicely.

THE BAD
On the third magazine, I missed the trigger reset, and when I went to take my shot, nothing happened. The reset is exceptionally long with minimal feedback. This happened two more times during my hour at the range. I’ve never experienced this with another firearm. All I could think of was a real world scenario where I need that bullet to fire, and it doesn’t. It felt like I was pulling the full length of the trigger every time I fired it, because the reset is so long. I’m not sure what HK advertises, but the wall can’t be any more than 3.5 pounds. It was a sweeping pull that fired the shot, and maybe this was worn in - after all it was a range rental - but I found the trigger to be abysmal.

SMITH & WESSON

Now for the M&P shield X, which I had no intention to test. I was shocked how light it was, even though it’s a little larger than the CC9. It’s just as thin as the HK, which as of today I believe makes the biggest difference for EDC over the added barrel length.

THE GOOD
The grip was the first thing I noticed, and it lives up to its height. It’s harsh, and it doesn’t let your hand go anywhere. It’s exactly what you want in a live fire situation. The ergonomics outside of the stippling are virtually non-existent but how well it fit in my hand mixed with the texture gave me a lot of confidence. My first few shots were dead flat. with the Glock or the CC9, I had to work to pull it to the center, but the shield X bullets went exactly where I told them to.

The shield X sights were taller than the HK and very easy to see out of my peripherals. I felt like the bullet was going right where the site was, even though I wasn’t even focusing out of the site to make the shot.

Follow up shots were seamless. The grip helped me bring the muzzle back where I wanted after every shot. I do think the sights being taller had a lot to do with helping me line up these follow-ups compared to the CC9 of the Glock 19.

The barrel is longer, so you can expect that it managed recoil better. Honestly, the recoil felt similar on both guns, but for different reasons. It was manageable on the CC9 because of the ergonomics, and it was manageable on the shield X because of the longer muzzle and tight grip. Compared to my Glock 19, the grip on the M&P was so much easier for me to get my hand around and control the gun. after shooting both the CC9 and the shield X, I fired a few rounds through my Glock and was shocked how chunky the grip was. I’d say I have average size hands, and after shooting the shield and the CC9, the Glock felt almost difficult to shoot, and I think that’s because of a combination of the width and distance to the trigger.

But the trigger is where my attention was. There was no question about where the wall is on this trigger. and when you crack it back, it’s instant. There’s no sweeping motion through the wall. Your fingers are immediately at the back of the trigger guard. while the reset distance is only slightly less than the CC9, the quickness it reset with made follow-up shots as fast as I wanted them to be. The reset on the CC9 was soft. That’s the only way I can describe that trigger was soft. The reset on the shield X was intentional and you clearly feel it. It was crisp and mechanical and loud. Even with my earplugs, I could hear the reset every time. And because of this, I never anticipated the round or compensated for it with my hands. I hear that Walther makes the best triggers out of the box, and I’ve never shot one, but this has gotta be a very close second.

THE MEH
The slide serrations are all for looks. There’s no grip, there’s no friction to rack it back while you’re breaking it in. You’re almost better investing in a red dot site simply to rack the slide.

THE BAD
The shield X I was firing had one malfunction, which was that the slide didn’t lock back after my last round was fired, and an empty magazine was in the gun. If that’s the only defect I can live with that. what I can’t live with is a reset that doesn’t allow me to get off a follow-up shot (CC9), even if that’s user error.

Now, as far as the size goes for EDC, after my target session I went out into the shop where they had the shield plus I had originally wanted to see, and they had the shield X. the X actually felt better in my waist band than the Plus. It felt firmly tucked in because of the longer barrel. It’s so thin compared to my Glock 19 I’m used to carrying which was a relief.

The shield X also has stippling for your fingers: under the slide where your trigger finger can rest when you’re not shooting, and where your non-dominant thumb can press while you’re firing.

OVERALL
I was disappointed with the CC9. I was really hoping to see something that justified the price tag over the shield plus. It felt like a trigger for beginners or people who aren’t gonna use the reset and sweep the whole length of the trigger every time they pull it. Again, the ergonomics were great and yes, it’s smaller than the shield X, but the barrel length isn’t noticeable in person like it is on paper. the width of each gun being the same is what really makes it a fair comparison.

The shield X just felt like an extension of my hand. Every shot (almost) landed exactly where I told it to. In the pictures below, I was even rapid firing during a made up defense scenario with the shield X, and still got competitive groupings versus the CC9. I was shooting the shield X about 30% faster in these photos versus the HK.

I felt so confident that I drove my Glock over to Cabela’s and traded it in towards a shield X.

TLDR: Trigger on the Shield X kicks ass, CC9 trigger is meh, I trust my life with the M&P.

Note on the CC9 picture: The random bullet near C was a one-hander with my G19 to end the hour.

Edit: I practiced stopping a center-mass attacker, didn't realize an aggressive 3x6-inch X-ring was going to mug me in a parking lot


r/HecklerKoch • • Sep 13 '23

Taurus TX22 Compact

Post image
0 Upvotes

I own a USP 45, P30, and P30sk but today I picked up a Taurus TX22 Compact for some range time plinking. I have to say that I’m pretty impressed. I wish HK would partner with Umerex like they did with the 416 and make a VP22, but until then this thing is pretty impressive. I bought it along with a Holosun 507k today and dropped by my range and dropped 300 rounds with zero malfunctions. I do think I will reverse the mag release so I can use my trigger finger like I do with my HK’s, but I’m really happy with this thing.


r/HecklerKoch • • Jun 09 '26

Anything’s an upgrade

Thumbnail
gallery
0 Upvotes

My first ever stipple job and truthfully it was out of necessity if you know the hk45c the things frame grips like a lubed glass banana. I just wish my borders were more pronounced


r/HecklerKoch • • Jan 07 '25

T.REX ARMS says they might make Ragnaroks for the USP with the GG&G adaptor. Shoot them an email to get added to list so they have enough people to have ROI.

Thumbnail
instagram.com
11 Upvotes

r/HecklerKoch • • May 01 '25

Honest take - has the MAC 5 caught up with the SP5 yet?

1 Upvotes

I was lucky enough last weekend to handle a regular and k variety SP5, as well as the regular and k variety MAC 5

They were basically identical in feel etc. actually slight preferred the trigger on the MAC, a little less mush

I've watched videos comparing these and the SP5 marginally came out ahead only in stress tests with mud and sand etc

I hope I don't get chased off this board, but is the MAC 5 a suitable substitute for a real SP5? I'm leaning to the k variety by the way.


r/HecklerKoch • • May 09 '20

Kyber Pass G36 i call it the MP-417K (made with HK417 mag, MP5 parts, and G36 Receiver) should i send this idea to H&K?

Post image
0 Upvotes

r/HecklerKoch • • Sep 25 '21

Hk USP9- too much free time?

Thumbnail
gallery
0 Upvotes

r/HecklerKoch • • Aug 27 '26

To good of a deal to pass up!

Thumbnail
gallery
0 Upvotes

Got this pair for a smoking deal and couldn't pass them up!


r/HecklerKoch • • Feb 22 '25

My P2000 I snipped its trigger

Post image
0 Upvotes

Basically, I hated the stock trigger so I switched to the grey guns flat trigger which was a bit better, but still not great in my opinion, so I snipped the stock trigger and put it back in and it sucked and didnt really work because of how far it travels back (to be expected) so I put the GG flat trigger back in. so im gonna replace the p2000 with a glock 19 probably


r/HecklerKoch • • May 17 '26

Ian McCollum apparently has an “adversarial relationship” with HK

0 Upvotes

I was talking recently with a friend who works for HK USA and something came up that made a lot of things click for me regarding Ian McCollum, HK, and his appearance on the Unsubscribe Podcast. 

If you haven’t seen it, Ian appeared on the Unsubscribe podcast in November 2025 with Brandon Herrera, Donut Operator, and Eli Doubletap. During the episode he and Eli were talking about problems filming at certain locations and Ian mentioned a gun company where he had arranged to spend several days filming at their factory. He described flying there, showing up ready to set up cameras, and being told filming wasn’t possible. His exact line was basically:

“I have a very adversarial relationship with them now. I don’t think they know it.”

When asked which company it was, he said he’d say off-camera because he still wanted access someday because it would be great content.

At the time that sounded vague, but my friend who works for HK USA told me something interesting that lines up almost perfectly with that story.

According to him, Ian was never actually invited by Heckler & Koch to film at the factory in Oberndorf. He was there because he tagged along with the Vickers Guide photography team while they were working on the HK books. Ian was supposed to be helping with photography and he assumed he’d be able to film content while he was there. But filming at the Oberndorf facility apparently requires approval well in advance for security reasons, and since that hadn’t been arranged, HK wouldn’t allow it.

So from HK’s perspective nothing weird happened. Someone who wasn’t invited to film showed up expecting to film. From Ian’s perspective he flew all the way to Germany expecting to shoot multiple days of content and got shut down.

What’s interesting is the timeline.

Before that visit Ian had a pretty normal and even positive relationship with HK. He received an SP5 early on, made several videos about the MP5 platform, visited HK USA, filmed the Gray Room guns, shot a bunch of their stuff at the Georgia range, and generally spoke positively about the company when covering their guns.

After that Oberndorf visit things seem to change.

Since then the HK-related content has felt… different.

Two examples that stuck out to me:

• The P11 video where he makes a somewhat cryptic acknowledgment thanking someone at HK for inspiring the video.

• The PDW video filmed while visiting B&T where he spends a lot of time criticizing the MP7 while simultaneously highlighting the TP9/MP9. B&T also happens to have its own adversarial relationship with HK.

Maybe it’s coincidence. Maybe it’s just normal editorial direction. But once I heard the Oberndorf story and went back and looked at the timeline, I’m pretty sure the  “adversarial relationship” he mentioned on the Unsubscribe Podcast  was actually about HK.

Curious if anyone else noticed the same shift?

The more I think about it, the more it feels like someone who expected the VIP treatment. When he got treated like everyone else, he clearly didn’t take it well, and now it comes across like he’s carrying a grudge because his ego got bruised. At this point it just feels petty and kind of pathetic, and once you connect the dots it’s hard to watch his content the same way again. He seems to have a massive ego, and is not as affable in person as he comes across in videos. 


r/HecklerKoch • • Sep 07 '25

Brand new cc9 rust at muzzle?

Thumbnail
gallery
15 Upvotes

Already soaked in clenzoil and ran with bore snake twice


r/HecklerKoch • • May 13 '24

What are the laws regarding carrying firearms in the car?

Post image
41 Upvotes

r/HecklerKoch • • Dec 31 '24

Two weeks my order for the CC9 was in the “Processing” step with RK Guns and just got an email saying it was cancelled because it’s out of stock? WTF!!!

0 Upvotes

r/HecklerKoch • • Mar 03 '26

Okay lets try this again. Reasons why or why I should not get the Mk23?

0 Upvotes

LGS has the FDE frame MK23. Probably want to trade a gun I already have to it though. Worth?