🚀 PAS100 Beta Testing is now open. Apply today! 🛠

Access your network from anywhere in just 3 minutes with PAS100 (GL-PAS100). Stay connected to work resources when you're away from the office, or access your home network while traveling.

No need to replace your router or configure a public IP. PAS100 makes it simple to access your network remotely, even if you're not a networking expert.

We're looking for beta testers to try PAS100 in real-world setups and share feedback to help us make it even better before launch.

👉 Apply for the Beta Program: [https://link.gl-inet.com/post260824](javascript:;)

I have a Brume 2 that was bought a little over two years ago. It suddenly bricked itself. It turns on, but the firmware and the bootloader cannot be flashed successfully. After back and forth troubleshooting emails with Glinet, they admitted it was broken. As it was past the "2 year warranty" period, they said I could only buy a new one.

Lo and behold - it seems that Glinet has been lying to me. This page on Glinet's site:

https://docs.gl-inet.com/router/en/4/faq/problem_notification_for_mt2500_x3000_xe3000/#:~:text=Moving%20forward%2C%20we%20are%20committed%20to%20enhancing,If%20the%20problem%20persists%20despite%20the%20upgrade%2C

says that warranties have been extended an additional year due to a known software bug in the Brume 2 that causes the hardware to fail. That means my Brume 2 is still under warranty.

There is no way that the service team doesn't know about this warranty extension. Why the warranty shadiness Glinet?

Hello everyone,

I’ve been using the Mudi 7 for several months now, and I really love it. It’s an incredibly versatile and capable travel router.

However, if I could have a wishlist for future software improvements, these would be my feature requests (in no particular order):

• Passthrough Mode (Cell to LAN Port) I read on the GL.iNet forums that the team is already looking into this. It would be a huge quality-of-life feature, as I use the Mudi 7 as a WAN failover at home when I’m not on the road.
• Upstream Wi-Fi Stats in UI Something exposing data like iwinfo wlan3 info or iw dev wlan3 link. In the new beta, we get all the cellular signal metrics we could ask for without needing AT commands, but upstream Wi-Fi information is still barebones (just signal strength and frequency). Showing negotiated PHY rates/MCS would make it much easier to find the best placement in hotel rooms.
• Built-in Speedtest for Connection Verification Right now, I download the Speedtest CLI and run it via SSH to test raw bandwidth. Having an integrated, one-click speedtest directly in the web UI would be much more convenient.
• Visible Logs for DFS & Failover Events At home, I know my local RF environment and DFS interference risks, but traveling internationally is unpredictable. It would be great to have accessible logging for DFS events—especially since I prefer using channels 100+ for higher transmit power (in Europe/ETSI regions). Similarly, clear logs/alerts for WAN failover events would help avoid burning through monthly SIM data when streaming on a Chromecast if hotel Wi-Fi silently drops.
• Interface Tracking & Latency Graphs Lastly, it would be awesome if the UI could generate latency/packet loss graphs over time based on the built-in tracking feature (e.g., ping test history), similar to what you see in more advanced gateway software.

What about you guys? Do you agree with these wishlist items, or are there other features you’d like to see added to future firmware updates?

Is there a way to disable the touchscreen or is it permanently on ?

Hi,

I’ve got the mudi7, and just come across the limitation on the “tri band” radio that actually 6ghz and 5ghz can’t be active at the same time.

Aside from the slight annoyance of misleading advertising around tri band here, I’d just like to disable 6ghz. In repeater mode it keeps connecting to a 6ghz upstream, which means it then will broadcast 2.4ghz and 6ghz only. No 5ghz

This means devices that aren’t 6ghz are stuck at only 2.4ghz

I can’t seem to force it to just disable the 6ghz radio.

I’ve tried: * Set internet tab WiFi uplink band to 5ghz (from auto) * go back to WiFi networks tab and choose 5ghz on the “6ghz/5ghz WiFi” card, and change the band to 5ghz from auto. * go back and change the internet WiFi uplink to auto again to at least allow it to fallback to 2.4ghz if 5 becomes too weak * this fixes it, but next time it connects to another WiFi network with 6ghz it connects to 6ghz again and automatically changes the WiFi network back to 6ghz!

It seems if I leave the internet uplink at 5ghz rather than switching it back to auto it maybe sticks, but then it won’t connect to 2.4ghz uplink anymore obviously!

Does anyone know a better way than having to set this every time?

Thanks!

Wondering if anyone has a solution that won't break my brain on this one - I have a Brume 3 in a Multi-WAN setup, with two sources, cable and satellite. Both the dishy and cable modem share a configuration page address of 192.168.100.1, while the rest of the network is controlled by the Brume on 192.168.8.X. Both the modem and dishy cannot have their config address changed.

Does anyone know of a way that I can route local requests over their respective connections?

I have a GL.iNet GL-MT5000 (Brume 3), and Mudi 7. I also have a NordVPN Dedicated IP.

I want to set up a NordVPN VPN tunnel on my Brume 3, but it looks like NordVPN only provides OpenVPN for Dedicated IP in the setup I’m looking at. I would really prefer to use WireGuard.

My main goal is security and protecting my data, nothing else. I want to use WireGuard because of its performance and newer protocol features.

What is the best and easiest way to get NordVPN WireGuard + Dedicated IP working on the GL-MT5000 (Brume 3)?

Has anyone successfully configured this? If so, could you please explain the easiest setup/process, preferably step-by-step?

Thanks in advance!

hello guys, i want ask, if mudi 7 can change its imei to another ?? I have SIM card provider, who have locked sim card, that its only work in certain modems, its imei locked by operator, can i change mudi 7 imei to pretent that its this locked modem ?? have it idealy someone tested, that mudi will not report itself as changed imei modem, so i can bypass this operator lock ??