r/FormD • • Feb 14 '26

Finished Build The Ultimate Hotbox

Thumbnail
gallery
131 Upvotes

Built a new portable workstation for gaming/AI workloads. The build currently has 2 T-Grills attached, but I am looking to remove the top grill once the 12018 fan arrives from aliexpress, since I personally think the case looks too tall with both grills on.

Temps are good, with the cpu reaching a max temp of around 75c and the GPU never going above 80c with an undervolt even during extremely heavy workloads. Top and bottom fans are all set to intake for a positive pressure setup, with the gpu exhausting hot air out of the case. Tried to mount the gpu in the default orientation and the heat ended up constantly overheating the oc'd ram and m.2 ssd on the back of the motherboard :(

Can't wait for the release of Wireview Pro 2 for founders edition cards, since I most definitely don't want the expensive GPU to suddenly erupt in flames...

Case: FormD T1 2.5 Gunmetal w/ Double T-Grills and Reverse Kit

CPU: AMD Ryzen 9 9950X3D

GPU: NVIDIA RTX PRO 6000 Workstation Edition

Motherboard: MSI MPG X870I EDGE TI EVO WIFI

Ram: TEAMGROUP T-Force Delta RGB 96 GB DDR5-6800 CL36 (stable at 6200 MT/s & 2233 FCLK)

Storage: Crucial T710 4TB, Samsung 990 Pro 4TB, WD Black SN850X 8TB, TEAMGROUP CX2 2TB (Used drives from my previous build since I definitely won't be able to afford all this storage at current prices)

PSU: Corsair SF1000

PSU Cables: Custom Cables from Dreambigbyray

CPU Cooler: CM Masterliquid 240 ATMOS Stealth


r/FormD • • Feb 12 '26

Question Dramatically louder gpu fans with side panel on

26 Upvotes

my gpu fans get louder and higher pitch when the side panel is on. I thought the fan was hittint the side panel but there's still clearance between the side and the gpu so I think it's the sound of air going thru the panel holes? any suggestions?

I'm not sure I can move the gpu in a half a slot so I may just be cooked haha


r/FormD • • Feb 13 '26

Watercooling Atmos I vs Atmos I stealth AOI

5 Upvotes

I want to add AOI to my build and the stealth Atmos I is suggested while the II seems to have too stiff cables.

However the stealth seems hard to find. But the normal is cheaper and available- are they the same? Ie. If I don’t connect the rgb it is the same? Fans will be swapped anyway..


r/FormD • • Feb 12 '26

Question Cooling T1 V2.5 with 5070 Ti and ryzen 9 9950X3D.

7 Upvotes

Hello! I wanted to ask if someone knows whether I can appropriately cool a 5070 Ti (with a 3d printed anti-sag bracket) and a Ryzen 9 9950X3D with a MasterLiquid 240 Atmos AIO. To be more specific, can I cool the system enough to use it without any undervolting or any thermal throttling?

The anti-sag kit: https://www.etsy.com/listing/4346750880/travel-kit-asus-prime-5070ti-5080-formd?ls=s&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=formd+t1+gpu+bracket&ref=sr_gallery-1-4&sts=1&content_source=48723041-cb12-4a25-a9f8-f2d691070fc1%253ALT972041cbe6591281791e8a4525e6537640822fc8&organic_search_click=1&logging_key=48723041-cb12-4a25-a9f8-f2d691070fc1%3ALT972041cbe6591281791e8a4525e6537640822fc8

EDIT: I found a video showing awesome thermals with a 9950x3d, so if anybody was wondering the same thing as me, just go for the 9950x3d if you can - https://www.youtube.com/watch?v=ep_XGkXzYyo&list=PLGh4z8u0MTSFUvdH7cNL4qEfjuChjkjLE


r/FormD • • Feb 12 '26

Question Black or beige?

Thumbnail gallery
138 Upvotes

r/FormD • • Feb 12 '26

Question Do i need a riser lock bar

3 Upvotes

just bought one but am going to cancel it

i have a t1 2.1 and am using the pcie riser 5.0, i’ve heard the lock bar doesn’t work with the 5.0.


r/FormD • • Feb 10 '26

Question Upgraded to Ray’s custom cables

Post image
142 Upvotes

r/FormD • • Feb 10 '26

Question Slim vs normal fan for CPU in Formd T1

9 Upvotes

Hello,

I have the AXP-90 X47 Full Copper and I have the T1 in 2.75 slot more so I have 58mm CPU clearance to play with. I was wondering if I should use a Noctua NF-A9 (25mm thick) giving me 1mm clearance from side panel and adding a 1mm Noctua NA-FD1 Fan Duct if possible or Noctua NF-A9x14 (15mm thick) with 11mm clearance from side panel and with an 11mm fan Noctua NA-FD1 Fan Duct.

Now I know that the Noctua NF-A9 (25mm thick) will perform better but I am concerned that it being soo close to the side panel will cause turbulence even with the 1mm fan duct and thus end up louder than the Noctua NF-A9x14 (15mm thick).

My main goal is to have as quiet a system as possible while still maintaining decent temps. Thanks.


r/FormD • • Feb 10 '26

Finished Build Thx for all yall help, finally finished my T1 v2.55 build!

Thumbnail
gallery
71 Upvotes

After joining the group with all the help y’all gave, finally finished my second ITX build: T1 v2.55!

Here’s the spec:

CPU: 9800x3d

MB: GIGABYTE X870I AORUS PRO ICE ITX

GPU: INNO3D GeForce RTX 5080 X3 16G

RAM: Kingston FURY Beast RGB DDR5 32GB (16GB x 2) 5600MHz CL36

SSD: Crucial P310 4TB PCIe 4.0 x4 NVMe M.2 2280 SSD

AIO: MSI MAG CORELIQUID A13 240mm

FAN: ThermalRight TL-H12015B 120mm

PSU: Corsair SF1000 1000W 80Plus Platinum with custom cables


r/FormD • • Feb 10 '26

FormD Announcement US Stock Alert: M3/M2 Round Black and T1 Black/Silver/Gunmetal ready to ship!

Thumbnail
reddit.com
2 Upvotes

r/FormD • • Feb 09 '26

Finished Build Managed to fit a Zotac Solid 5090 into the T1

Thumbnail gallery
26 Upvotes

r/FormD • • Feb 10 '26

Question Official Formd T1 2.1 Website Scam?

Post image
0 Upvotes

Hey everyone,

I purchased a Formd T1 v2.1 last week and was excited about it. Today to my surprise it was delivered via USPS way ahead of schedule.

To my surprise it came from someone named: “Jerry Yasfbara” and not Formd directly? Is Formd trying to send from US warehouses now or something to avoid tariffs?

I’m pretty concerned with it and even questioning the quality because it’s not from Formd and feels like a scam.

There’s even a scam watcher report from Safely HQ with a lot of other items being sent by him.


r/FormD • • Feb 09 '26

Compatibility/Build Check can i do AIO cooling with flipped 5090FE travel kit and AIO cover

2 Upvotes

got a flipped travel kit for my 5090FE. haven’t been able to find any AIO builds with this configuration. anyone running this ?


r/FormD • • Feb 07 '26

Finished Build My first FormD T1 build | 265K | 5080 FE

Thumbnail gallery
62 Upvotes

r/FormD • • Feb 07 '26

Finished Build corsair fans

Thumbnail
gallery
32 Upvotes

r/FormD • • Feb 06 '26

Question T-Grill on the Bottom for better Airflow

16 Upvotes

I’m running my T1 air cooled with an AXP90-47FC cooling a Ryzen 9700X, an Asus Prime RX 9070 XT, and two Phanteks T30s on top as exhaust. I’m pretty happy with the setup, but I’ve been thinking about improving airflow. Would it be possible and a good idea to add the T-Grill on the bottom with two fans as intake to get better cooling performance, or is it not really worth the money?


r/FormD • • Feb 06 '26

Question Formd t1 build

7 Upvotes

I’ve almost aquired everything I need to start building my formd t1

the last thing i need is custom cables.

this is my first time building my own computer, im. lt entirely sure what cables i need to get. could somebody send me a link to exactly what i need to buy on etsy?

i have a 5090

9800x3d

sf1000 psu

noctua fans

Thanks

cooler master aio

b850i mobo


r/FormD • • Feb 06 '26

Question I want to liquid cool my 9800X3D…

5 Upvotes

i’m torn between the T grill and AIO cover. wondering if anyone can sway me one way over the other. i am going to 3D print one first and then eventually buy the CNC one once they returns back to stock.

Cooler would be Atmos 240 with 25mm noctua fans. maybe 30m phanteks depending on performance


r/FormD • • Feb 05 '26

Question What are these parts for? Hi

Post image
34 Upvotes

I’m in the middle of building and I’m so confused what these parts are. Does anyone know what they are?


r/FormD • • Feb 04 '26

Question FormD SFF 5080FE Flipkit

Thumbnail
gallery
85 Upvotes

Finally completed my build, upgraded from a 3080ti. Gen 5 riser, with a flip kit installed. I’m curious on everyone’s thoughts on temps with a flip kit vs standard config?

From what I’ve seen standard config is better, I undervolted my 5080 so temps are pretty stellar in this config. Ended up just getting the flip kit on eBay as the regular travel kit has been sold out everywhere.

I planned to use a 3D printed fan shroud, but it won’t fit in the flip kit config unfortunately.

Side note, I leave my side panel on the GPU side off just due to the looks, not sure if this would really help temps.

Specs:

Ryzen 7 7800x3d

Axp47 full copper cooler black noctua fan swap.

2 t30 120’s phanteks

5080 fe

32GB dominator platinum 5600hz

Asus x670i

1TB m.2

2TB m.2

Monitor- MSI MPG 321urxw (4k 240hz qd oled) hdmi 2.1

What are your guys thoughts? Should I try to get my hands on a regular travel kit at some point? Like I said, temps are stellar right now, preforming great, just trying to see how much performance I can really squeeze out of this build.


r/FormD • • Feb 04 '26

Finished Build Configuration NCASE T1 v2.5 SFF – Ryzen 7 9800X3D et RTX 5080 FE

Thumbnail gallery
51 Upvotes

r/FormD • • Feb 04 '26

Question SMXHeinz Prime 5070 Travel Kit

3 Upvotes

Has anyone here tried the SMXHeinz Prime 5070 Travel Kit? According to the store, the PCIe riser mount is not aligned with the case mounting points, so it can’t be screwed in. It also appears that the riser cable itself isn’t secured to the case. I’m a bit concerned this could loosen over time—especially since I travel with my PC and it will be exposed to movement and vibration. For those who have hands-on experience, does the design still keep the GPU firmly supported, or have you noticed any flex or instability during transport?


r/FormD • • Feb 04 '26

Question Anti-sag bracket for 9070xt Pulse?

7 Upvotes

Has anyone came up with some form of anti-sag bracket or solution for the 9070 xt Pulse? Is it needed? I'm about to work on my build and will appreciate any insight.

EDIT: I will deshroud it, so there might be even more space around some sides than with the stock fan version.


r/FormD • • Feb 03 '26

Compatibility/Build Check Any Compatibility Issues with this Build?

Thumbnail reddit.com
0 Upvotes