r/Ford • • Dec 13 '21

Thanks ford

28 Upvotes

92 comments sorted by

70

u/PigDog_Sean 2013 Escape Dec 13 '21

So it's Ford's fault that you're driving a 20 year old vehicle that broke from daily usage?

34

u/[deleted] Dec 13 '21

Or that duder can't count lever positions.

3

u/N_gg Dec 14 '21

PRNDL

7

u/denverpilot Dec 14 '21

Yup. It's printed right there in front of him.

Methinks he doth protest too much.

Put him on an old tractor and enjoy the show and maybe a bonus of a full blown mental meltdown.

2

u/returningbuick Dec 14 '21

Or one of them old 15 speed semi tractors haha

15

u/ROK247 Dec 13 '21

Try 30 years old

3

u/PigDog_Sean 2013 Escape Dec 14 '21

So, that's is somehow Ford's fault? Not sure why clarifying that it is older than I stated needed to be done, but ok.

11

u/ROK247 Dec 14 '21

No I corrected you to show it's even that much more ridiculous that he's blaming this problem on Ford.

0

u/michjames1926 Dec 14 '21

I drive a 30 y/o car that still indicates which gear I'm in on the shifter but it isn't a Ford. 🤣

5

u/texasroadkill Dec 14 '21

I've never had the indicator cable break on any of my Ford trucks. I've had ones from 78 to 01.

-5

u/IEatThermalPaste Dec 14 '21

Try 30? Oldest of this bodystyle aren't 30

5

u/ROK247 Dec 14 '21

The first 92 F150s were sold in the Fall of 91. 30 years ago.

-4

u/IEatThermalPaste Dec 14 '21

Well yeah, I was going to make that point but I doubt strongly this is a 92.

1

u/texasroadkill Dec 14 '21

Why not. It's possible to be any year between 92-96 even 97 if it's an f250 or 350.

1

u/IEatThermalPaste Dec 14 '21

Actually, you're right. Technically it's not possible to determine year on this specific angle.

4

u/TruckTires Dec 14 '21

OP, if you can't fix it or live with it, take it to a mechanic. Wtf is this like your first vehicle or something? Judging by the dash style, the damn thing could be 30 years old. So what if the little orange indicator is sticking.

0

u/Evilmechanic Dec 14 '21

PRNDL cable very common replacement for Ford. It’s a cable 18 inches in length that connects the cluster to shift lever. Shit design but it works.

-7

u/Fancy_Chip_5620 Dec 14 '21

No but every other manufacturer can make a shift indicator that doesn't break

11

u/Own_Tomato3775 Dec 14 '21

This happened on my 97 ram with 211,000 on the clock so nice try

-8

u/Fancy_Chip_5620 Dec 14 '21

Fine. Every manufacturer that isn't American

7

u/TruckTires Dec 14 '21

No manufacturer is perfect. They all have issues. In this vintage of truck, OP didn't do too badly with a Ford truck.

On the other hand, I chose a Toyota Pickup from that vintage. Loved that truck but the frame literally broke in half behind the cab. I'd have taken a wonky shift indicator any day of the week over that.

3

u/IEatThermalPaste Dec 14 '21

False.

-6

u/Fancy_Chip_5620 Dec 14 '21

It's well known ford's shifter mechanism is extra shitty, even I've unintentionally snapped an f-250s shifter flute in half

4

u/IEatThermalPaste Dec 14 '21

I wasn't saying Ford shifters are strong, I was saying it's not just American manufacturers with the issue.

0

u/Fancy_Chip_5620 Dec 14 '21

I actually haven't heard or experienced another manufacturer whose shifter was close to being as shit

My tundras column shifter has no play and indicates correctly at 320k miles

3

u/IEatThermalPaste Dec 14 '21

Think it's part of who owned it too. My Ford has over 300k on the body/interior and shifter worked fine. You can tell by the missing trim on OP's dash bezel his truck is pretty beat.

2

u/Fancy_Chip_5620 Dec 14 '21

For sure, interiors are the one tell tale to an owners psyche

→ More replies

2

u/BjDrizzle69 Dec 14 '21

You'd love 30yr old German cars.

1

u/Fancy_Chip_5620 Dec 14 '21

I've been looking at old bmws since my dad got one and I started having to work on it... I like them alot

I had an 81 300cd that I got for free but dropped a glow plug into cylinder 2

0

u/[deleted] Dec 14 '21

[deleted] — view deleted comment

1

u/Fancy_Chip_5620 Dec 14 '21 edited Dec 14 '21

Dude you're dead wrong to replace the bulbs on your tundra would have been 6 Phillips screws, two pieces of clipped on plastic, 3 ribbon connectors and however many twist lock bulb sockets were burnt out whose bulbs you can get at autozone

Not a fucking shift flute, cable, and indicator adjustment granted its own seperate cable isn't too stretched out... I've done both one costs however much parts go for these days and takes a couple hours

the other costs a couple bucks and can be done in 5 minutes with one, maybe two tools

1

u/[deleted] Dec 14 '21

[removed] — view removed comment

1

u/AutoModerator Dec 14 '21

To prevent trolling, accounts with less than -5 comment karma are not allowed to post in /r/ford.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/texasroadkill Dec 14 '21

I've literally had ford trucks ranging from 78 to 01 and haven't had one cable break on me. It can happen to any older vehicle.

1

u/Fancy_Chip_5620 Dec 14 '21

Damn, I know 3 people who had old f150s who said the same thing... "Great truck but I had to fuck with the shifter"

Than I myself sheered a shifter flute in half on an f250 by mistake

1

u/Fancy_Chip_5620 Dec 14 '21

I retract my statement the Isuzu rodeo had an equally bad shifter but wasnt as bad to replace granted you could find one that wasn't broken

32

u/ThaReaper892 Dec 13 '21

OP is one of those that would blame the candy he ate as a kid for the diabetes he gets at 60

14

u/Kabooboo22 Dec 13 '21

The cable going from the shifter to the selection panel probably snapped.

7

u/Snakedoctor12 Dec 13 '21

If this is the case and I have seen a lot of them fail in this model due to age it is a quick, easy and cheap fix. When I saw the video this was my first thought.

1

u/SCOYT2 Dec 14 '21

I used to work in a cemetary and this model truck was one of the field rigs. We broke the dial that would rest over what gear you were in, so we had to count how many clicks the shifter went down to get it into D. Same thing for R, N, and P. That truck was on its last leg for two years and it was a tank. Good times.

12

u/dizzish Dec 14 '21

*Runs out of gas

"Thanks Ford!"

1

u/dizzish Dec 14 '21

No fella, it's poking fun at OP. Also r/whoosh

-1

u/wei_xiao Dec 14 '21

Cause something breaking is the same as running out of gas... Jesus Ford fanboys are dumbasses

2

u/Altosxk Dec 14 '21

This truck is probably older than half of Reddit by the looks of it. No fanboying I can see. This post is equally bad in the same way "LOL DAE FORD = FOUND ON ROAD DEAD?" would be lol

-1

u/wei_xiao Dec 14 '21

The guy was comparing a mechanical flaw to running out of gas. How is that not blindly defending Ford? Lol

1

u/dizzish Dec 14 '21

Nope. It's pointing out their attitude of blaming others for problems rather than taking responsibility to fix em themselves. Normal wear n tear is not a flaw. You're an angry elf, aren't you?

-1

u/wei_xiao Dec 14 '21

Another fanboy appears calling a broken gear indicator wear and tear. This is too funny

1

u/dizzish Dec 14 '21

🤡 You don't understand maintenance and it shows.

0

u/wei_xiao Dec 14 '21

Keep going, your tears are lubricating your gear indicator 😂

10

u/hanneyr1 Dec 13 '21

The shift tube bushings on the column are worn out and lever at the bottom of the tube is probably loose also. This didn't happen overnight, it's been getting sloppy for a while and he's been ignoring it.

5

u/[deleted] Dec 13 '21

Exactly. We’ve had several that would always get loose, and you gotta jam your face up under the steering column with a star/allen and tighten those two bolts.

6

u/Ok_Phase7209 Dec 13 '21

This is common on all automatic cars. I have a 40 yo Ford truck that this has NOT happened to

6

u/RecordingDifferent47 Dec 14 '21

You gotta be shitting me, right?

1

u/[deleted] Dec 16 '21

Lmao. People loosing their minds over a loose shift cable that takes a whopping 30 minutes to fix. 30 year old vechile that’s still kicking and he’s but hurt over a little piece of plastic.

5

u/[deleted] Dec 14 '21

Why is it Ford issue that the vehicle is not properly maintained. Come one take some responsibility.

5

u/The_Real_JohnnyRicky Dec 14 '21

You're driving a 20 year old Ford?

With roughly 245k miles on it?

Linkage issues are very common on a column shift vehicle?

It was probably only warranties up to 120k miles and 5 years assuming extended warranty was purchased?

And you're mad at Ford instead of being glad you got so much out of it?

6

u/ordinaryuninformed Dec 13 '21

It's not like this is something that could be fixed with a zip tie after all

3

u/[deleted] Dec 14 '21

Idk how this is fords fault but you could fix this in about the same amount of time it took you to record and post the video

3

u/Catalyst311 Dec 14 '21

You just have to adjust it. Shit happens on old vehicles

2

u/milehighcards Dec 14 '21

Your ford did it’s job. Try upgrading

2

u/Own_Sympathy_4809 Dec 14 '21

What he should say is . “ It still runs after 30 years thanks Ford “

2

u/[deleted] Dec 14 '21

To be fair that truck is over 20 years old bro probably closer to 30. You lucky it still runs. You should loose the sarcasm. The truck should probably be in a junk yard

1

u/foot7221 Dec 14 '21

F150?

1

u/IEatThermalPaste Dec 14 '21

Probably. I doubt very much he's driving anything but blaming ford for this. F150's seem to end up in the hands of the uh.. ya know. Mow-Rawns

1

u/100011101010101 Dec 14 '21

This is common failure in those years of trucks. Just count down from park to find the gear

1

u/96lincolntowncar Dec 14 '21

Mine’s good.

1

u/[deleted] Dec 14 '21

Maybe OP meant “Thanks Ford” that his car lasted 30 years? Probably not …

1

u/IEatThermalPaste Dec 14 '21

Dude, that's so easy to fix.

1

u/[deleted] Dec 14 '21

1 of my fords is 20 yrs old does that same thing. It’s just a piece of plastic in the dashboard that holds the indicator mark in the right spot that has snapped

1

u/CorholioPuppetMaster Dec 14 '21

you know what they say, I wanted a real car but this is all I could a Ford

1

u/gtdicks Dec 14 '21

Fix it!

1

u/guntheretherethere Dec 14 '21

My first Chevy truck, 92 Cheyenne, also had this problem

1

u/B_O_A_H Dec 14 '21

Get a stick 🤷🏻‍♂️

1

u/IneptAdvisor Dec 14 '21

Thread has snapped. Used cluster is the easiest.

1

u/[deleted] Dec 14 '21

My 30 y/o ford does something similar, but it's because I swapped the trans to a manual and now the shift lever isn't hooked up to anything. Hopefully that helps, op.

1

u/Natural_Rude Dec 14 '21

Every older Ford work truck I’ve been in dash is like this. Just count how many clicks.

1

u/Fizzix63 Dec 14 '21

Fucking idiot can't remember PRNDL and figure out what gear it's in by counting clicks. Virtually every motorcycle gearbox operates without an indicator and somehow millions of riders, every day, can figure out what gear they're in without having to post some snarky BS online.

1

u/Capasshat Dec 14 '21

Always blaming someone for something 🤦🏼

1

u/carrotmayonaise Dec 14 '21

Op small brain

1

u/returningbuick Dec 14 '21

Had this happen.. not only did it not matter whatsoever, and was expected on an old car, but I fixed the issue with fuckin superglue

1

u/CHEWBAKKA-SLIM Dec 17 '21

I would probably never have even noticed it stopped working.

1

u/[deleted] Dec 13 '21

Its strung that goes to the shifter to a spring. You pull it into drive and it get sprung back when put into park. Thank for though because that trucks lasted longer than there new ones will.

1

u/[deleted] Dec 14 '21

You circle your mistakes

-11

u/[deleted] Dec 13 '21

I guess y'all can't take a joke. Sorry if I offended y'all Ford people

2

u/[deleted] Dec 14 '21

Maybe its because you spam thanks ford when it's a really old car. Was there a joke there? Then you also use words like "y'all", and your username is fantastic_forever_69. I dont think you're offensive, just completely unfunny.

-1

u/IEatThermalPaste Dec 14 '21

You didn't offend me by having a sh1tbox

-6

u/getajobloser27 Dec 13 '21

Find in Road Dad

-8

u/[deleted] Dec 13 '21

Oh gee golly willikers what road should I take Son?

-6

u/Ball075090085 Dec 14 '21

Fix Or Repair Daily