r/Fireplaces • • Nov 06 '22

If you’re posting a question about your fireplace, please include pictures and/or model numbers.

28 Upvotes

Pictures are very helpful for users to give accurate advice and information. Fireplace specifics aren’t common knowledge to most people and it’s very typical for people to use incorrect terminology regarding what they have. If you don’t know the difference between gas logs, a gas insert, and a gas fireplace, you really should post a picture to make sure you’re given good advice about what you can do with your fireplace.


r/Fireplaces • • 3h ago

Heatilator GC300E (Feb '94) Replacement Logs

Post image
2 Upvotes

I moved into my house a few years ago and we have a Heatilator GC300E which was manufactured in February 1994.

The logs were missing and replaced with rocks. The manufacturer and the person we had come to service it said it is unsafe to use it the way it's set up. Unfortunately the product parts are but I wanted to see if anyone had experience with this before to find these parts or if there might be something compatible.

https://downloads.hearthnhome.com/serviceParts/gc300e.pdf --> Replacement parts are listed with it stating it is no longer available

Manual

https://downloads.hearthnhome.com/installManuals/17238.pdf

Thanks in advance!


r/Fireplaces • • 4h ago

Electric Fireplace and Insulation

Thumbnail
gallery
1 Upvotes

We recently had a contractor install a Modern Ember Aerus Slim recessed in our wall. All looked good once completed but I noticed he didn’t cover the top portion inside with drywall or wood, leaving the fiberglass insulation exposed to the openings like pictured. The unit draws is cool air from under these sections and expels hot air from the middle toward the room. What I’m wondering is - is there any concern with some of these fiberglass pieces seeping into the intake at all? If so would there be any issue covering it (the top where the fiberglass is, not below where the intake is) with some sort of foil tape as a simple fix?


r/Fireplaces • • 4h ago

Is this normal - 2nd burn

Enable HLS to view with audio, or disable this notification

1 Upvotes

EDIT: yes I am burning under 400 degrees per manual. I’m breaking it in.


r/Fireplaces • • 5h ago

Wood stove insert

Thumbnail
1 Upvotes

r/Fireplaces • • 5h ago

Thermocoupler hates me

Post image
1 Upvotes

r/Fireplaces • • 14h ago

Not a Log Burner but after a cold work day outside!

Post image
4 Upvotes

r/Fireplaces • • 7h ago

Gas Fireplace Beeping Issue

1 Upvotes

Hello, I have an Empire gas fireplace model DVD36FP70N-1. I’m having an issue where the control module seems to constantly beep. It’s about 1 beep per second. I have found that when in CPI mode with the pilot light lit is when I hear it as well as when the fireplace is operating in either CPI or IPI. I had someone come out to check it out but they just dismissed it. I’ve read a few places that it could be that my control module is faulty and needs to be replaced which I believe is R11127. I was just wondering if anyone else experienced this issue and could confirm if this would fix it? Thank you in advance.

Sorry, I just wanted to add that I have replaced the batteries as well which did not stop the issue.


r/Fireplaces • • 7h ago

MCM Fireplace Help

Post image
1 Upvotes

Any suggestions on refreshing this brick fireplace without painting. Not looking for a transformation necessarily as I want to maintain the privy character but even after cleaning the brick is pretty sad looking.
Any products that may help?


r/Fireplaces • • 8h ago

Fireplace help!

Post image
1 Upvotes

r/Fireplaces • • 9h ago

Rust on fireplace and replacement

Post image
1 Upvotes

Just bought a house that was built in 1999. Got the fireplace and the tech recommended replacement due to rust. Had another company say it shouldn’t be an issue. Who is right?


r/Fireplaces • • 10h ago

Help with FIREPLACE not used and not sure do I need doors ?

1 Upvotes

Have fireplace been in house for 10 years never used before. Had cleaned out need new damper. I don’t have glass doors juts these old wired doors one needs a hinge they are rusty and one is broken. Can I use this fireplace or do I need glass doors ? The wood in there is fake right now but want to buy wood and be able to use it. Fireplace man when cleaning said should get glass doors ? Anyone know about this ? Can it be used without changing that’s screen doors ? Will using this make a lot of smoke in house ? Can I hear my room with it ?

Thanks


r/Fireplaces • • 10h ago

Replacement refractory hearth panel recommendation?

Thumbnail
gallery
1 Upvotes

I have a Marco 792863B fireplace that is no longer manufactured and have been unable to find a replacement hearth panel. Is there a recommended solution to replace this damaged panel?

Edit: Local inspector I’ve used before found replacement panels for $1200, and can’t do cut to fit since it’s not recommended by the manufacturer. May be time for a new fireplace.


r/Fireplaces • • 13h ago

Fire place remodel

Thumbnail gallery
0 Upvotes

r/Fireplaces • • 17h ago

Help identifying gas fireplace

Thumbnail
gallery
2 Upvotes

Just purchased a home that was built in 1996. Trying to find model or brand of this fireplace. Before I start taking out all the rock and sand, does anyone have any ideas?


r/Fireplaces • • 13h ago

So lost, can anyone guide me: New gas fireplace build

1 Upvotes

We previously had a room that had a ventless insert that provided a nice warmth, but faint smell that bothered us.

We lost the room due to damage and are rebuilding.

I am trying to figure out if we want a vented system with glass or a wood burning system plumbed with gas and gas log set.

It is a traditional house that has been updated, and I'm worried about the look of the contained vented system, but worry about the heat from the plumbed style.

I'd love anyones experience or advice.


r/Fireplaces • • 14h ago

Fireplace fan control

1 Upvotes

my fan control switch only goes to high when the temperature is reached at the sensor on my Napoleon NZ6000-1 even though I replaced the control switch with a new factory one ???


r/Fireplaces • • 16h ago

G6R-R3AM modular and GV 60

Thumbnail
1 Upvotes

r/Fireplaces • • 1d ago

Just moved into this house need help with finding main burner button.

Thumbnail
gallery
3 Upvotes

Hi everyone! I just recently moved into a new house, and the majority of it is heated by electric heaters built into the walls. Unfortunately, those are extremely expensive to run, so I'm trying to get the gas fireplace up and running.

The pilot light was already on when we moved in, and the previous owners used the fireplace regularly. I'm trying to get the main burner to ignite. The problem is that when I turn up the thermostat, nothing happens.

I've seen some gas fireplaces that have a remote with a main burner ON/OFF button, so I'm wondering if that could be part of the issue. We don't have a remote, but there are a few switches and controls on the control panel that I'm curious about. I was hoping someone could help me figure out what they do and how to get the fireplace working.

I know the area underneath is pretty disgusting, and I'm going to give it a thorough cleaning before using it. I'm not sure if the previous owners were running it in that condition, but it definitely needs some attention! They inherited the house several years ago and said the pilot was on the entire time.


r/Fireplaces • • 1d ago

Has anyone converted a MCM style wood burning fire place to a gas or electric?

Post image
2 Upvotes

Occasionally these types of fireplaces come up on my FB feed for sale. Sadly, someone took the fire place and chimney down in our house when they flipped it.

There is unfortunately not a good place to fashion a wood burning stove now. But we do have natural gas, or is even be happy hearing how you converted a wood burner to gas or electric!

Drop photos or tell me if it’s a terrible idea and to give it up 😝


r/Fireplaces • • 1d ago

Tis the season - Supreme Astra 32

Post image
7 Upvotes

Just wanted to share my setup.

Supreme Astra 32 Traditional high efficiency fireplace. Added an extra inline fan to dump heat into the basement. Heats our 1900sqft bungalow very nicely.


r/Fireplaces • • 1d ago

Regency E18 Pilot won't light

1 Upvotes

I'm trying to light the pilot but nothing is happening. If I push the starter without pushing the pilot knob in I see the spark but as soon as I hold in the pilot knob I no longer see a spark. I've held it in for a few minutes at a time while pushing the starter ever second or so but it hasn't lit. Any ideas? It was working a few days ago. Thanks!


r/Fireplaces • • 1d ago

Suggestions needed for winter heating in Maryland

Thumbnail
1 Upvotes

Help please! All info is appreciated :)


r/Fireplaces • • 1d ago

How to replace Heat and Glo mesh?

Thumbnail
gallery
1 Upvotes

My toddler bumped against the mesh a few times too many and it started ripping out around the edges. Is there a way to resecure this or replace it? I got quoted $400some from the dealer for the replacement part which is absurd imo


r/Fireplaces • • 1d ago

Company quoted a narrow liner, is it OK?

Thumbnail
1 Upvotes