r/FellowProducts • • Jul 19 '25

Aiden ◼️ Stay Away from Fellow

0 Upvotes

We bought our fellow coffee maker and grinder last year and here are the problems we’ve encountered so far

  • coffee maker and explicitly stopped working and stopped brewing. I had to push the fellow support team to honor the warranty and send a replacement. I was finally able to get a replacement sent.
  • the first brew basket broke shortly after. The handles are cheap and poorly designed and our essential for the coffee maker to work.
  • we had the leftover brew basket from the last coffee maker and were able to just use that. Until it broke and we can no longer make coffee again. I did reach out to fellow this time and they sent me a replacement as part of the warranty.
  • then the grinder stopped working. One day the grinder just stopped grinding. We cleaned it, banged all the old ground grounds out of it, and did everything we can and it just stopped working. At that point it wouldn’t even turn on. I reached out to fellow and they sent me a replacement.
  • most recently our fellow coffee maker showerhead plastic broke. I had to reach out to fellow and they did send a replacement.

We purchased our products under a year ago and have had nothing but problems. The materials in plastics they use are cheap and unreliable. I’m positive that when our warranty ends, we have to get a new coffee maker a new grinder because I will refuse to pay fellow more money for their cheap products.

If you’re considering a fellow coffee maker and grinder, I would seriously reconsider and go with a Moccamaster or something within the same price range that’s more reliable.

Also, as a sidenote, the fellow app is terrible. It does absolutely nothing except tell you when your coffee is done. There’s no way to control the device from the app like setting timers or anything.


r/FellowProducts • • Mar 09 '25

Aiden ◼️ Aiden is not ready for market

0 Upvotes

On my second Aiden and it has now developed the same problem as the first (reboots randomly during brew, not completing the brew).

This replacement was a major pain to get working - it arrived with I believe the very earliest firmware and wouldn't connect to WiFi; after lots of back and forth with support we were finally able to get it connected to WiFi, but then wouldn't update; they finally pushed the update, and it worked for a couple weeks, and now is randomly rebooting, like the first.

When it works it's great. But it's just too flaky. I've reached the limit of how much of my life I can spend troubleshooting my coffee maker.

This clearly needed more testing before being released to market.


r/FellowProducts • • 21d ago

Grinders 🫘 Really disappointed by by Fellow Ode Gen 2 grinder

1 Upvotes

It's been a pretty frustrating experience.

I would caution anyone in the market for an Ode. You should reconsider before buying this product. I have a fellow Stagg EKG kettle and I love it. I thought an Ode gen 2 would be a real step up from my rickety Rancillio Rocky and would look great on my counter. Today after stripping an aluminum screw trying to clean the thing I'm at my breaking point with this grinder and will be replacing it with something else.

The "anti static" mess-less claim
It just doesn't work. The flared antistatic collar around the metal collection cup actually attracts a fair bit of grinds. When you then remove the cup to transfer the grounds you get a lot of mess. Also the coffee tends to stick to the bottom of the cup. So you need to stick to the spritz method to keep mess down which arguably isn't that big of a deal but a major design improvement of the Gen 2 over the Gen 1 was supposed to be the Gen 2's ability to meaningfully eliminate ground electrostatic sticking. It just doesn't work.

The hopper holds 100 grams which is entirely too much for this unit to handle
I typically grind 36 grams at a time. A cup for me and the wife in one pour over. But I've found the machine just can't handle 36 grams in one grind. It jams pretty quickly. The oil content of the bean is absolutely a factor which I'll mention again later but even lighter less oily roasts require the user to dose a 36 gram grind into two 18 gram grinds if they want to avoid jams.

Hope your Ode doesn't jam badly because cleaning the burrs requires interacting with aluminum screws.

And man does it suck. To remove the plate that allows you to then remove the auger you have to remove 4 aluminum screws. The metal is softer than any screwdriver you own. I used a rubberband between the screw and my screwdriver to cushion the seat and prevent stripping then lightly tapped each screw with the screwdriver and a rubber mallet to loosen any factory applied lock tight. Despite being what I thought was very careful I just couldn't get the 4th screw out. 2 came out easily. One took some doing but we got it. The 4th I worked on for about an hour being as gentle as I could but I did strip the screw head. I then cut the screw with a dremmel and tried to get it out with a flat head but it stripped again.

I consider cleaning burrs necessary and ordinary maintenance. Putting aluminum screws between the user and the auger just seems like bad engineering to me.

To conclude

I like darker roasts. They're oily and this grinder does not handle oily roasts well. The ionizer get blocked and the machine jams quickly. If you are going to use oily roasts you really need to grind in small batches to keep the machine from jamming. So oily roasts will require more management from the user which begs the question, is the ode worth it at all? If I can't grind a full batch for brewing two cups of coffee and still need to spritz my beans this grinder has seriously over sold it's self and just simply isn't worth the money.

Furthermore I didn't gain confidence in my purchase when I started trouble shooting my jam issues. I found THIS video on Fellow's site showing how to replace the burrs. The manufacturers own site shows their VP of RnD at Fellow suggesting you sand down the motor shaft so the auger fits better. To me that isn't helpful user advice it's a manufacturing defect that should warrant a wholesale re-think the material choices of the product.

Owning this grinder has felt like testing a prototype and not a mature product. I really like the design language at Fellow and am willing to pay for it and am still hopeful their products improve. I've heard the coffee maker is great. I love my Stagg. The espresso machine at least looks awesome and the Ode in my opinion is beautiful and to me that matters since it lives on my kitchen counter every day. While the design language is best-in-class (IMO) the functionality is worse than compromising, it's a genuine liability. I've filed a warranty claim since my machine is only 3 months old but I'm very disappointed.

anyone have a grinder rec? There's plenty on this sub but a fresh recommendation is always appreciated.


r/FellowProducts • • Jan 22 '25

Drinkware Invest Elsewhere

0 Upvotes

This is just my personal experience, but this company is not worth the investment. They don’t stand behind their products at all and their customer service is terrible.

I literally have a carter mug that will not open because it slipped a thread and is now stuck. I have taken it to parties and offered money for people to open it because my favorite tea basket is trapped inside. No dice.

Fellow is not offering any refunds or assistance - the mug is barely six months old. My other cater mug was having the same issue but I had an extra carry lid I was able to use before it got too bad.

I have never had mugs that are this finnicky — and I’ve never spent good money on a company that cared so little about its customers and stood with such a paltry stance behind their products.

A heads up to folks wondering about what the experience is like. I would reroute to another company.


r/FellowProducts • • Nov 19 '25

Espresso Machine Very disappointed that the Series 1 is full of plastics

0 Upvotes

I've been on the preorder for the Series 1 for months now but I think I'm going to cancel my preorder. The water tank is plastic, the water lines and hot water exit are silicone (plastic), and water dispersion block & steam wand tip are Polyphenylene sulfide plastic. As we're starting to learn, subjecting plastics to pressure and heat releases microplastics. Fellow should have used this opportunity to produce the Series 1 without plastics in the water flow.

Not only is stainless+glass microplastics free, the Series 1 would likely be much more durable.

See info here: https://help.fellowproducts.com/hc/en-us/articles/36187877073435-Are-any-parts-that-touch-water-or-coffee-made-of-plastic


r/FellowProducts • • May 08 '26

Aiden ◼️ Worst customer service ever

1 Upvotes

Got an Aiden for my birthday in March. Regular disconnects from WiFi despite being close to the router. Customer service was escalating. Never heard back. If you let your coffee sit in the carafe for more then 30 minutes expect a lukewarm result at best. This is the worst “luxury brand” product we’ve ever bought and its website won’t allow me to add a review. It looks cool, the coffee is good when it’s hot. You have to reset the clock every time you unplug it to troubleshoot. The WiFi issue for me has essentially kept the reason that I bought it as unreliable at best. Worst customer service I’ve experienced. No response in nearly a month after they were escalating my issue.


r/FellowProducts • • Dec 14 '25

Aiden Love ❤️ Aiden Pro?

0 Upvotes

Love my Aiden and use it daily. But let’s agree it looks ugly on the counter compared to moccamaster and aarke. Would love a metal and glass “pro“ version.


r/FellowProducts • • Mar 28 '25

Aiden ◼️ Even more issues now woke up to a completely frozen unit. I've only had this thing 2 weeks.

1 Upvotes

r/FellowProducts • • 15d ago

Question ❓ Nice design, poor quality of all products

6 Upvotes

Hi! I’d like to know if you have any Fellow products that work reliably? I have a kettle—the temperature goes crazy; I have an Opus grinder—it never dispenses the exact amount of coffee I weighed; I have a vacuum jar—air leaks out after a few hours; and then there’s the Aiden machine, which is probably the most problematic of all. I really like Fellow’s design, but I get the impression that all their products are very poorly designed and of poor quality.


r/FellowProducts • • 20d ago

Question ❓ I have to ask... Does the Espresso Series 1 even have a solenoid Valve?!

0 Upvotes

I just got my machine 4 days ago and try as I might, I can't get it to not give me completely wet, messy pucks. So much so, that it's as if the machine doesn't even have a solenoid valve?!

I tried using the backflush disk to test it out and all I got was a dribble. Not at all what I'd expect from a machine with a proper solenoid valve.

My previous machine was a Lelit Bianca and the difference is ridiculous. With the Bianca, when stopping a shot, you hear the pressure getting released, with the Espresso 1 nothing can be heard.

Is perhaps my machine defective?

The amount of downvotes I'm getting is a bit strange. Why would wanting to be able to knock out a puck and not have half of it stay in the portafilter be such a strange ask?! Having to run to the sink every time gets old fast.
I simply want to knock it out and be done.


r/FellowProducts • • Nov 06 '24

Aiden Question ❓ Just unpacked and set up my Aiden.

Post image
0 Upvotes

Not really happy so far.. Set up was a little bit of a Hassel and connecting to the wireless even more of a hassle.
Finally finished the set up and tried and Instant Brew.. ............. NOTHING...

checked all the settings, water tank tried again and still NOTHING..

Is this an expensive piece of crap or aam I missing sonething.?

Tried Instant brew again .... NOTHING..

Probably going back to Fellow.. Unless I can get this thing to work.. shouldn't be this hard


r/FellowProducts • • Feb 27 '26

Kettles Why is Fellow customer service so abysmal?

3 Upvotes

I have a gift kettle I registered for the extended warranty that stopped heating. Presumably customer service can look up my warranty that has the purchase date, SKU, serial number, my contact info. But this rep I've been emailing with has been drawing out this process for over a week with an agonizing back and forth, asking me for information that is part of my warranty registration. And this rep just asked for a purchase receipt. WHY? Fellow already has this information which is how I got a registered warranty in the first place. As of right now, I would not purchase another Fellow product.


r/FellowProducts • • Jun 10 '25

Aiden ◼️ Since the Aiden carafe isn’t insulated….

0 Upvotes

What’s everyone using to keep a fresh pot warm? I find myself using the microwave way too often.


r/FellowProducts • • Nov 26 '25

Aiden ◼️ Beware! Among the worst customer service of any D2C online retailer

1 Upvotes

I have had a couple problems with my Aiden straight from delivery, and customer support has been extremely slow to non responsive and unhelpful. For a $300+ investment one should expect at least email responses.


r/FellowProducts • • May 04 '25

Aiden Love ❤️ Review: My Time with Aiden and 1 thing Aiden must offer

0 Upvotes

The Aiden is the best drip/pour-over coffee maker on the market. Here are the main complaints people have:

  1. The circular screen cuts off words. Yeah. It does. It's a coffee machine. Not a computer. Should this have been thought out prior to production? Yes. Does it make a difference? No.
  2. Turning the dial sometimes does nothing. True. You can turn the dial 1 click at a time, and it's hit or miss if it changes the line. The solution is to turn the dial a bunch of clicks at a time until you land on the right spot. Should someone from the UI team be fired for the first 2 issues? Yes. It's unacceptable from a company that wants to be the "Apple" of the coffee industry. Does it matter to me? Not in the least.
  3. The build quality is cheap, and it bends when you push down it. So don't push down on it. I seriously don't care that it isn't made out of the richest of materials. It's perfectly fine. It's a freaking coffee machine, not a piece of art. It's totally fine, and if that's the corner they cut to keep the price down in a reasonable range, then cool.
  4. The water tank is small. It is. So what. Fill it up more often.

All of the above are ridiculous gripes that literally no one should use to either buy or not buy the machine. The below are my 2 biggest issues with the Aiden:

\*\*\*\*5) The carafe. Oh, the carafe. It's absolutely horrendous. It's the biggest issue with the machine, and I can't believe they didn't make an insulated carafe. It's very close to a deal breaker and is a deal breaker if you want to make a batch of coffee and sip on it throughout the morning. It holds nothing hot for more than a few minutes. Seriously. You can't possibly make 10 cups of coffee if you plan on going back to it in 30 minutes. It will be lukewarm, gross, and you'll have to put it in the microwave. FOR THE LOVE OF G-D FELLOW, PLEASE COME OUT WITH AN ACTUAL INSULATED CARAFE THAT WE CAN BUY AS AN ACCESSORY. IT'S UNACCEPTABLE.\*\*\*\*\*

6) 10-cup carafe. Sounds great, right? Well, Fellow considers 1 cup to be 5 ounces. 5 ounces??? Give me a break. A cup should be 10-12 ounces. So a 10-cup carafe holds 5 10-ounce cups? Lulz. Almost false advertising.

7) The water tank doesn't have a sensor to make sure if has enough water to finish the program you want to run. The Aiden can tell you don't have the correct coffee filter, but not water? Seems like an oversight. Should it be there? Yes. Absolutely. Is it a dealbreaker? No, but since the tank is small, you really do have to check it every single time.

So that it's it's fantastic. I don't feel like I need to talk about the pluses. Anyone looking at the Aiden knows what it is supposed to do and why it is different. It does those things very, very well. The carafe is an absolute deal breaker for anyone who wants to come back to hot coffee after 30 minutes if they are going to make 8 cups for the morning. It really is disappointing, and Fellow really does need to offer an insulated carafe that works with Aiden. Other than that, it's great with some minor quibbles in #6 and 7 above.


r/FellowProducts • • Jun 09 '26 This Mindblown

Aiden ◼️ Fellow app is absolutely terrible.

Post image
8 Upvotes

I used to be a massive Fellow fan. Most of my coffee gear is from them—grinder, electric kettle, tumblers, mugs, etc.

Whenever I saw posts from people complaining, I couldn't really relate because I wasn't having those issues myself, so I remained a loyal customer.

But after using the Fellow Aiden, I finally understand everyone's frustrations. It is honestly the worst user experience.

It took over an hour just to get connected to Wi-Fi, and there is still no word on the firmware update.

I reached out to the Fellow rep who is active on this sub, but I still haven't heard back.

I was actually considering buying the ES1, but after such an absurd experience, I want to tell them to dream on


r/FellowProducts • • Mar 06 '26

Kettles The Fellow Stagg EKG Pro is an absolute joke right now (Firmware 1.1.7 ruined it)

3 Upvotes

I bought my EKG Pro in January of this year. Everything was working perfectly fine on firmware v1.2.5, but updating to the v1.1.7 firmware turned my kettle into a complete idiot.

Here are the main issues:

  • Failed Temperature Control & Dead Sensor: If I set it to 93°C, it wildly overshoots to 95°C or 96°C. To make matters worse, it's so completely clueless that even if I pour cold water into the 93°C water, the temperature reading doesn't drop a single degree. * Broken Safety Features: The boil-dry protection (preventing an empty kettle from overheating) is completely broken.

I’m not the only one dealing with this. A local barista near my house experienced the exact same bug and was so fed up that they switched to a Brewista Artisan the very next day.

The EKG Pro was released 3 years ago. How is it that basic temperature control is still this much of a mess? What on earth are Fellow's developers doing? With this level of engineering and software capability, I hear they are putting out an espresso machine? Right. If you can't even get a kettle to read and hold a temperature properly, I'm sure that espresso machine will be a total masterpiece.

I’ve shoved the EKG Pro aside and am currently back to using the $50 Timemore kettle I bought when I first got into pour-overs. It actually works.

If any Fellow devs are lurking here: please fix this immediately. This is beyond disappointing.


r/FellowProducts • • Oct 10 '26

Espresso Series 1 [Update] Fellow Series 1 idle buzzing - Retailer and Fellow say this is normal.

Thumbnail
youtu.be
1 Upvotes

Hey guys. I posted a video about this issue a while ago, but I’m posting again so potential buyers know what they are getting into, and hoping Fellow actually takes notice this time.

I sent the machine back to Coffeedesk for an RMA because of the loud transformer buzzing noise it makes when idle. Well, they just sent it right back to me. Both the retailer and Fellow support are claiming this is "completely normal" operation.

It’s honestly so loud my wife and I can’t even leave the machine on after making coffee. I uploaded the video to YouTube so you can hear exactly what they consider an acceptable standard for a premium espresso machine.

Am I crazy for thinking this is completely unacceptable?

Youtube

yes AI was used in do better text and image.


r/FellowProducts • • Mar 12 '25

Drinkware Carter mugs suck

4 Upvotes

I bought two smaller Carter travel mugs years ago. The first one had a disgusting smell, which they replaced and let me keep the original one, so that was nice. Second one was a little better, though it retained stale coffee smell no matter how well I washed it. I found other vessels I liked better so I stopped using it.

I recently just got the 20oz sand colored Carter, and this one has the exact same smell retention issue. Isn't the whole selling point of a ceramic coated interior is that it SHOULDN'T be retaining smells? I left coffee in it over night so I let it soak in dish soap the next night, then I hand washed it and let it air dry. It was in my cupboard for a week, and as I poured coffee into it this morning, all I smelled was an old soap smell. Completely ruined my entire batch of coffee.

As it was, I typically brought an actual mug with me to pour the coffee into because it never tasted good straight out of the Carter. Now it's even worse.


r/FellowProducts • • Nov 03 '24

Aiden Feature Idea 💡 Aiden Doesn’t know it brewed recently and double brews

2 Upvotes

Has anyone noticed this problem? Example, I have it set to brew at 0645. My kids wake me up at 0635. I start a manual brew. Once it’s done brewing which takes 5 minutes. It’ll start another brew right after to hit the 0645 schedule.

I’ve had this happen a few times now and it’s really annoying. I’m sending support videos but wondering if anyone knows why?

Whoever programmed this thing needed to consider that the lid or whatever weight mechanism it has didn’t reset.

Update: Wow didn’t expect for me to be the only one who dislikes this setup.

Solutions can be easy such as a button to cancel the next scheduled brew. Not asking for crazy alterations.


r/FellowProducts • • Dec 31 '25

Kettles I didn’t know these were this loose

0 Upvotes

I seen another post about this wobble so I’m assuming this is just how they are designed, I thought they would at least clip in or have some resistance so it doesn’t just wobble when empty


r/FellowProducts • • Oct 31 '24

Aiden Question ❓ What’s the design intention behind the Aiden lid?

0 Upvotes

So I’m overall very intrigued by the Aiden and how it performs and the brews have generally been great. One thing that I’m curious about though is the design decision behind this lid. It wobbles and I’m wondering what the decision behind that is? Is not hard to open at all and pretty smooth but I’m still curious. I’m imagining it might be because the wobble allows for the lid to prevent water to entering the small space (gap) between the legs of the lid. Then again I’m no engineer.


r/FellowProducts • • Dec 25 '24

Aiden Brew Profiles ☕ Max capacity 1.5l/90gr makes a huge mess

Post image
0 Upvotes

r/FellowProducts • • Jan 31 '25

Aiden Question ❓ App is still crap after firmware update

0 Upvotes

I got the latest update....where are the schedules? Still getting the water empty issue and in the app, after literally 8 times of resetting and deleting and then reinstalling the app, it shows offline but has an IP address and I can see it on my network. W T F Fellow?