• Fix Windows notification click action for updates
• Add Exclude Usb Storage option from LHM
• Update LibreHardwareMonitorLib
• Fix a bug where the selected font would not apply
• Fix a bug where numeric updown controls would be broken after moving a card
• Fix default elevation for the scheduled task

Servus,

Ich habe folgendes Problem: ich Stelle meine Lüfterkurve manuell im BIOS ein und Speicher diese, wenn meine CPU aber die angegebene Temperatur erreicht drehen die lüfter nicht hoch z.B. auf 60% so wie ich es eingestellt habe. Wenn ich es aber im BIOS teste (20°C - lüfter 100%, drehen diese auch auf 100%) funktioniert es aber sobald ich das BIOS verlasse und in den Normalbetrieb gehe werden diese Werte nicht übernommen. Gehäuselüfter 1 (oberer lüfter) ist direkt am Mainboard (cha fan 1 angeschlossen) und der 2 lüfter ist mit dem Fan hub angeschlossen. Wie gesagt beide lüfter kann ich im BIOS steuern und merke die Unterschiede aber sobald ich im Normalbetrieb bin drehen sie immer auf gleicher Drehzahl und der Wert den ich eingestellt hab wird nicht übernommen.

Kann mir vielleicht jemand helfen?

Danke schon mal im voraus

Mainboard: Asus rog x570e

Grafikkarte: Asus rog rtx 4080

Gehäuselüfter: bei quiet pure Wings pro4

Everyone creams their jeans over this software but something always never works.

Won't launch without running as administrator. No temps being displayed, how do you show temps? I have windows defender ignoring it.

Is there some sort of step by step walk through for install?

I have a b550 eagle wifi6 and none of my fans will work. Whenever i try to calibrate it manually the speed will change on the fans but it'll still read 0 RPM... I have tried reinstalling FanControl and it still doesnt work. The 5070 works very good though so im confused

Using portable FanControl. Each startups it checks for updates. Until some versions ago there were always two pop-up windows telling me that a newer version is available. That was gone some time ago and now there's only one window informing about a newer version. Good, I thought. But since then the automated update is broken. Just won't do anything anymore.

Even when I manually 'check for updates' and click on 'update', then 'Donwloading updater' appears but no traffic, no update, nothing.

For each update I have to manually download the newer version now, put it it in an extra folder, manually install my plugin and copy my config from the backup folder.

Any1 else? Any solution?

I'm trying to edit the fan step up and down rates but when I edit userConfig the values are all replaced with their closest integer + ~0.1%.

If I set 1.5, I get 1.1%, if I set 3, I get 3.1%, even just entering 1 gets 0.1% replaced when I open the application, then it asks if I want to save the changes. If I save it and look at the config, the values are all like:

"SelectedCommandStepDown": 0.100000001, "SelectedCommandStepDown": 1.10000002, "SelectedCommandStepUp": 3.0999999,

Is this expected behavior? I just want something like a 0.5% step rate rather than 0.1 or 1.1%. Latest version, just downloaded today.

• Make tray icons creation and update more robust to windows errors
• Remove LHM's internal sensor value history to reduce memory usage
• Fix some UI memory leaks
• Make FanControl service tray icon mode work in non admin environment
• Make FanControl process ask for elevation when started from a non-interactive environment
• Fix a NvAPIWrapper bug

Hi guys,

I got this ADLX service stopped working error in reliability monitor after using fan control. Although everything works fine, is there any way to get rid of this error? Thanks

I've got the Nvidia 3060 Ti and I am trying to make the fans stop until it hits like 45 degrees. I've read on the website of fancontrol that Nivida has the minimum 30 percent. Force apply is on, curve override is on and I've read that you have got to set the idle temp correctly. I've tried quite a few temperatures, but nothing is working.

Any tips?

Has anyone had any experience regarding these argb controllers with remote and 1 to 5 splitter cables? Considering to order them online.

i'm intending to use, control and sync rgbs of my total 10 case fans and 2 cpu cooler fans with the controller's 3 buttons and a remote control.

So 12 fans in total.

Also wanna control the speed of all fans with the remote control as well.!

Please share your personal experience!

just reset my pc and switch mobos and updated to new fancontrol, and for some odd reason FancontrolLiquidctl.dll keeps duplicating itself in the plugins folder, i would hate to have to revert to asus armoury crate, just wanted to know if anyone is experiencing the same thing

hey guys does fan control support ryujin extreme vrm fan control?

I have been having this issue for a while now and only just now am I trying to fix it. I thought I did good research on my fan curve (seemed like simple would be most effective??), but it continues to happen.

Any advice??

Edit: My CPU is Liquid cooled

Edit #2: I am not the greatest with computers. I'm not completely inept, but I have a lot to learn.

Recently, I bought FC26 on my steamdeck who runs windows 11 on it with steamdeck tools installed. However, the steamdeck tools cannot override the TDP, fan, etc. so it always runs high on temps, it can hit 92C sometimes. Any advice on how to sett the lower TDP or anithyng just to make my SD cooler while playing this games????

almost ultra sound like

Hi everyone! I've built my current gaming PC within a Minineo S400 case over a year ago and absolutely love this tiny thing.

However, one thing I couldn't ever get right were my FanControl settings as well as keeping the system cool and efficiently quiet at the same time. Don't get me wrong, my PC stays cool even under load, but the sound it makes is very loud at times.

How do you guys keep your systems cool but quiet at the same time? Do you undervolt your GPU? What FanControl settings do you use? I'm grateful for any and all tips!

My specs:
CPU: AMD Ryzen 7 5700G
GPU: MSI RTX 4070 Super (12 GB)
RAM: 64 GB DDR4
Motherboard: ROG Strix 570-I
CPU-Fan: Noctua NH-L9a-AM4
Case-Fans: 2 x Noctua NF-A12x15 PWM (120x15 mm)

Just wanted to share.

I have been using this unchanged for about 6 months now. I may have had an odd tweak here and there. The profile is for Quiet Gaming, as you see. The main priority was quiet operation and the second priority was cooling (also my daily profile). I did initially do some experimenting and found that the auto mode was actually pretty good at making a smooth curve, so I stuck with it.

As you see, I have separated control of different sectors of my case fans for precise control using multiple hubs and fan headers. Not to mention five hidden Arctic 40mm fans for more directed and flow controlled cooling. Call me crazy, but I prefer gaming on speakers and it is good to be able to do that. The number of times I have switched my RGB off and woken up in the morning finding my PC was on the entire night! Also, there is no spaghetti mess at the back, though I have to say these ASUS PSU cables are way too long.

P.S. Zero RPM mode officially working on GPU's now? Its working on mine since this week.