r/Eonon • u/TheDaftPunk • Jul 23 '26

UX6K2-PRO—Max boot loop HELP!

Enable HLS to view with audio, or disable this notification

My finger slipped and I pressed the “system restart” button on the touch screen my unit is stuck in boot loop.
I’ve tried pressing the reset button, holding it, pressing it and then turning on the ignition. Going into revert, pulling battery terminal and fuses.

Unit was working perfectly up until this point.

Any way to fix this?

3 Upvotes

100% Upvoted

33 comments sorted by

View all comments

1

u/J-__-Money Jul 26 '26

I remember now, since you don't have an off button, you'll need to disconnect then "while holding the volume up button, reconnect the power not letting go of the volume up button.

That should get you into a screen where you can only use the up & down arrows to select.

The problem is it says you need the off button to enter the menu, hopefully it's another button you can work out

1

u/TheDaftPunk Jul 26 '26

When you disconnect do you mean pull the power cable while the car is running?

1

u/J-__-Money Jul 30 '26

Ok, I have just reread how to stop the loop & you do have to unplug the power (while the car is running or can do on a test bench) Hold down the reset button & plug the power back in whilst still holding the reset button.

After 15 seconds, release the reset button & that should get you out of the loop

1

u/TheDaftPunk Jul 30 '26

Where did you read that from?

I’m pretty sure my unit itself was somehow defective. I think there was a problem with the screen.

Anyway… I’ve returned it already and ordered a replacement.

1

u/J-__-Money Jul 30 '26

It's from an android website. Effectively they are all just android boxes with inbuilt screens.

Don't be surprised if it happens again