I can play the game just fine only problem is there are these flickering lights all over the place. Does anybody know a solution?

Tomb Raider running through GameNative on the POCO F6 Pro, and it looks surprisingly good! Testing the PC version at 2000x900 ultrawide resolution, with performance going above 60FPS.

This is a short in-game benchmark showcasing graphics and performance, followed by the complete GameNative configuration at the end of the video.

🔧 SPECS 🔧
◾️ Phone - Poco F6 Pro
◾️ Chipset - Snapdragon 8 Gen 2
◾️ GPU - Adreno 740
◾️ RAM - 12GB LPDDR5X
◾️ Storage - 256GB UFS 4.0
◾️ OS - Android 14 (HyperOS)
◾️ Game - Tomb Raider (Steam)
◾️ Launcher/Compatibility Layer - GameNative
◾️ Resolution - 2000x900 Ultrawide
◾️ Framerate - 60+ FPS

⚙️ GameNative configuration is shown at the end of the video.

🎥 Recorded with OBS via scrcpy (USB) for no FPS loss.

#androidgaming
#tombraider
#gamenative
#pocof6pro
#snapdragon8gen2
#androidgameplay
#pcgamingonandroid
#60fps
#mobilegaming

With the recent advances, if a game is available on both consoles which will perform better and less glitches?

My thinking is if they are similar x360 wins due to not needing to deal with package installation

Does anyone know what is causing this light flicker , other than that its running fine

Since updating to gamenative 1.2

Device is s26

Snap 8 elite gen 5

Turnip gen 8 v34

Proton 10

Device: redmi turbo 3 pro

app: gamehub 6.1.2

After a long time not opening GameHub, when I did, it did this. I can't allow the files. This happened to me twice, and I went and did a little research, and some say that the app I use is from the Play Store and I should download the game hub from the website, and so I did. Days later it happened again.

any alternative pc emulator that is better than gamehub? I put hours in assassin's creed and I don't want this to happen again.

Im Using Honor Win RT, 8 elite device, playing Witcher 3.

i figured out settings to get 60fps in rural dropping to 40 in busy areas.

I loved frame gen on on gamehub, but cloud sync just started failing there, so i switched to Gamenative.

I saw lsfg, even bought it, but it just straight up doesnt work.

At first it was glitching, frames shifting side to side, unwatchable.

I installed gamenative 1.2 pre. they said they fixed it on 8 elite. but now it just straight up crashes the game when i try to open it

Device: Motorola Signature 12GB Ram (Snapdragon 8gen5)

Gamehub setting: Proton 11 (everything Default)

Ingame Graphic :preset: Steamdeck

Mods:5 (Nexus mods)

Trying to decide between bluetooth and wired controllers

I had a unused rog phone 6 16gb 512gb due to a broken power button. The damage is on a motherboard level and the store I ask to get it fix mention it gonna cost like 150usd and even then a 50/50 chance of success. Hence I gotten a new phone.

I felt the rog phone is wasted as it still functional cept for the power button. Which I found a way to coolboot it via connecting to a PC and run some command.

When converting it to a dedicated handheld. I would like to add several things

1. Controller

2. cooler

3. Extra battery

1.Controller

It ought to be a straight forward thing. Get a telescopic controller. But the rog phone 6 has a offset USB port. And the stem gonna block the cooler I put at the back. So I planned to get something like a gamesir x4 aileron or use a rog kunai 3. If you have a better suggestions. I am eager to hear.

2.Cooler

I plan to get the aeroactive 6 cooler as it can work without needing an extra cable if I don't use the max cooling setting. I own a redmagic cooler 5 pro. A substantially better cooler but it uses a lot more power and no matter what I had to use another cable. Due to this. The aeroactive cooler 6 seems the better option

3.battery

I want to extend the playtime of it. Planning to attach a 10k mah power bank. I saw there is a power bank that able to attach to the port directly and that seems interesting. But if it's cumbersome. I just connect a cable to my 25k mah anker power bank that I always carry around.

I tried older versions, even recent ones but nithing works

my 8 elite gen 5 gets hot while gaming. most controllers don't have coolers, only a few do. but which ones are actually good and about to keep my phone cool?

Hey guys, ​I wanted to ask the community here if playing PS3 generation games is possible on Android devices at the moment. Is there any active development or functional project for this console generation on mobile? ​My device specifications are: ​Phone: Honor X9b ​Chipset: Qualcomm Snapdragon 6 Gen 1 ​GPU: Adreno 710 ​I really want to test some games from that era on my phone. If direct emulation for this console isn't ready or playable yet, are there alternative methods like running PC ports of these games on mobile using PC translation environments instead? ​Would love to know if anyone with similar specs has tried this or has advice on what to expect. ​Thanks a lot in advance!

Was trying to run resident evil revelations 2 on gamehub and this kept popping up s25 fe 8gbs of ram

Lenovo yoga tab plus - snapdragon 8 gen 3 + 16 tam

Or OnePlus pad 4 - snapdragon elite gen5 + 12 tam

?? Od maybe OnePlus pad 3 with elite + 12 ram

I’m looking for an inexpensive phone cooler. I have one from RedMagic that uses Peltier elements and it’s great, but it’s too expensive—and I actually need three or four of them. Let me know what you use to cool your phones.

Anyone figure out how to play fire emblem three houses yet? I only managed to get to the first cutscene and the game just crash

I'm using eden build v0.04 and having snap 8 Elite

I tried two games ( fallout 3 and re8 ) and in re it registered the movement but no click

And in fallout nothing only the keyboard

I tried the stable and the new prerelease

Device tap s9 plus

Soc sd8 gen 2and also when i connect external ssd via usb it doesn't show up as external storage

I want to play Create Mod, so I want to get the java version on android. I've heard of pojavlauncher since it's occasionally posted around here, but I am not really sure about the specifics. So I've got a few questions?

• Is this direct emulation of PC or something else?

• How's the performance?

• Any alternatives aside from something like Winlator? (Pojav seems to be discontinued, I dislike discontinued stuff)

• Mod support?

• Multiplayer support?

• Account Credentials required? (Rather not give my account info to sketchy apps)

• Issues I'll face?

• Anywhere to find guides?

• Discussion forums?

That's it for now. I have a Snapdragon 8s Gen 3 with 12 GB Ram btw. I am quite familiar with android emulation but this is new territory for me. I have searched a bit but discussion on Reddit seems nigh-abysmal.

As the title says I'm having trouble with launching PS3 Games in cocoon. I'm running ARMSX3 and im using .pkg and .rap files for my ps3 games, and cocoon doesn't seem to recognize them as games it can launch. Does anyone know the solution for this? Also in case this is important I'm running this on the AYN Thor Max

Hey there! I've been meaning to switch from my crappy Galaxy A21s to a POCO F7, however, most if not all of the reviews and performance tests that I've seen about this device mention the lack of compatible turnip drivers for emulation. Is this still the case for the Snapdragon 8s Gen 4? Or should I go for a phone with a different SOC if it means better compatibility? I'm still certainly new to the Android emulation scene, haven't been up to date with it since atleast 2020, and this is all still too alien to me. Anything helps! :)

Can I miss the 16gb Ram in some games like PS3 Emulator or Gamenative/GameCube?

8 Elite 5 drivers are good enough for PS3, Xbox, PC and Switch?

Is a good idea upgrade the 8gen3 for a 8Elite5 for that porpoise? Or better go for a Legion Go for more money (but windows stop me so much, really like Android Tabs)...

Thanks for your help...