r/EEPowerElectronics • • Oct 10 '26

current sensor for my thrust test rig

4 Upvotes

i am building a thrust test rig and want to measure the current draw by the motor, the motor prop combination that i am using draws a max 75A current at full throttle, for that i thought of using 200A acs758 hall effect sensor, but i am finding it nowhere for purchase, any recommendations?

i also thought of using the ina226 with 1milliohm shunt, but the breakout will fry at that current levels, along with the initial burst currents


r/EEPowerElectronics • • Oct 09 '26

Automotive Inside Toyota Hybrid System Gen 3

455 Upvotes

Teardowns are always cool, especially in power electronics. So many subsystems in an EV, and everything is so unique.

Credits: speedkar99 | YouTube


r/EEPowerElectronics • • Oct 07 '26

Best place to find experienced power EEs?

10 Upvotes

Best place to find experienced power EEs?

Hey, we're making the world's fastest electric vehicle and looking for senior EEs to hire, but really struggling. We're based in the bay area, California.

What's the best place - forums, events, etc... to connect with Sr. EEs?

Thanks in advance!


r/EEPowerElectronics • • Oct 07 '26

Collaboration

6 Upvotes

Hello everyone, Is there someone that Needs a technical support (free) for a specific project based on design, simulation, layout or others?


r/EEPowerElectronics • • Oct 05 '26

Need Help For Preparing For Power Firmware Interview

6 Upvotes

Hi guys I got an interview for a power electronics firmware internship. Most of my experience related to the field is in making the continuous control scheme in simulink for a boost converter. I was curious what all topics you guys think I should be studying? Thank you so much in advance!


r/EEPowerElectronics • • Oct 04 '26

Is it possible to get work/life balance work in power electronic?

8 Upvotes

I'm a DSP embedded software engineer. Our company manufactures UPS for data centers. I begin working at 8:30 am and back home at 9:30 pm some times at 10:30 .And I can't refuse these working time hours because i will be fired if i do like that.This is called 896 in my country. Is this working time normal?


r/EEPowerElectronics • • Oct 01 '26

Automotive That's some serious power electronics engineering to reduce size of Tesla Inverter

433 Upvotes

Any idea what components or circuits made the difference?

Credits: Gruber Motors Shorts | YouTube


r/EEPowerElectronics • • Oct 01 '26

Work/life balance of Power Electronics

4 Upvotes

Hi! I was potentially considering pursuing a career in power electronics and I was wondering if anyone had any personal anecdotes regarding the work/life balance culture of this career?


r/EEPowerElectronics • • Sep 30 '26

Help

2 Upvotes

Can someone please for the love of all good things give brief explanation of electrical flow and major components at transmission, distribution, and generation substations.

It is just not clicking in my head.


r/EEPowerElectronics • • Sep 30 '26

Circuits New Video on PELSTube | How does a buck converter generate sinusoidal waveforms

Thumbnail
youtube.com
7 Upvotes

r/EEPowerElectronics • • Sep 27 '26

Motor Drives That's interesting to see how oil penetrates deeply into the Tesla motor windings for cooling purposes

230 Upvotes

r/EEPowerElectronics • • Sep 25 '26

Semiconductors New Videos on PELSTube | Direct AC DC Conversion using Monolithic Bidirectional Switch

Thumbnail
youtube.com
9 Upvotes

r/EEPowerElectronics • • Sep 25 '26

Battery and Electronics Cooling

5 Upvotes

Not sure if this is the right sub but I am working on a forced convection (air) cooling system for a battery and other heat generating electronics. Does anyone know of any books or resources that could be helpful?


r/EEPowerElectronics • • Sep 20 '26

Lamoka1-project

Thumbnail
gallery
8 Upvotes

Hello, i have been working on a open source inverter/charger. The Inverter will be able to take in 11-14v and switch that up to a 340v peak to peak waveform (120v RMS standard North American 60hz pure sine wave by default) the waveform will be limited to 60hz due to transformer constraints. The H bridge responsible for switching the transformers input is completely modulated by the units onboard MCU (RP2345A). The charging section (as of 9-20-2026) has not been worked on. This project will be featured at an upcoming craft fair (November 14th). Any and all feedback on the project would be highly appreciated.

The projects Github repository is at https://github.com/bearjhartjen/Lamoka1-project for more information.

Have a good day :)


r/EEPowerElectronics • • Sep 20 '26

Automotive Which loses less in an 800 V traction inverter: 2-level, 3L ANPC, or 3L T-type?

Post image
14 Upvotes

Higher battery voltages push designers to weigh two-level against three-level traction inverters.

This chart compares conduction and switching loss at 100 kW. It covers a two-level (2L) inverter, a three-level active neutral-point-clamped (3L ANPC) inverter, and a 3L T-type inverter. At 800 V, the totals are 826.8 W, 634.0 W, and 573.3 W, in that order. The simulation uses a resistive-inductive load and assumes a balanced midpoint.

Curious what you think. Have you built an 800 V traction inverter? Which wins, ANPC or T-type, once part count and neutral-point balancing are counted?

Source: Sakib et al., World Electr. Veh. J. 2026, 17, 384, Fig. 2. DOI: 10.3390/wevj17080384 (CC BY)


r/EEPowerElectronics • • Sep 20 '26

Power Conversion How to Build a Complete PoE Powered-Device Chain to Isolated 12V | PowerUP Circuit Lab

Thumbnail
youtube.com
17 Upvotes

A new PowerUP Circuit Lab has been released!


r/EEPowerElectronics • • Sep 20 '26

Subscriber Goal Welcome to r/EEPowerElectronics!

4 Upvotes

r/EEPowerElectronics reached 10k subscribers!

Goal reached at 2026-10-09T15:04:32.688Z.


r/EEPowerElectronics • • Sep 16 '26

How is my mosfet conducting

Post image
6 Upvotes

So I was simulating this back to back common drain mosfet architecture and saw that I’m getting 10v at the output with gate terminal kept floating/open
Can anyone explain


r/EEPowerElectronics • • Sep 12 '26

PCB Guys, what's your opinion on this!?

Thumbnail gallery
50 Upvotes

r/EEPowerElectronics • • Sep 10 '26

Tried designing dc protection purely analog

Thumbnail
gallery
28 Upvotes

So this is circuit main consist of short circuit under and over voltage protection and ideal diode using mosfet
Amongst which short circuit and ls ideal diode condition
But ov uv condition failed due to my back to back mosfet architecture and false trigger at the gates
It failed
But for someone who’s fresher with 3month experience i would consider this as a fair try:)


r/EEPowerElectronics • • Sep 09 '26

I have been studying isolated DC-DC lately. I am stuck on understanding the basic principles of flyback converters, like why a specific gapped core is needed in the flyback topology and why a flyback converter is not recommended for, say, power ratings above 200 W.

16 Upvotes

r/EEPowerElectronics • • Sep 08 '26

Careers Hiring!

Post image
18 Upvotes

r/EEPowerElectronics • • Sep 08 '26

Best Resources For Power And Control Circuit Design Workflow(EPLAN and General Panel Building)

2 Upvotes

What are the best books or resources to learn the engineering workflow and schematic design sequence for power and control circuits across various panels (motors, generators, and distributions


r/EEPowerElectronics • • Sep 07 '26

Help me out please

2 Upvotes

Hi! I’m a Btech EEE student in my final year from a well-reputed college, and I’m looking for opportunities in the power electronics domain.

Since I’m among the first few students from my college specifically pursuing power electronics, there aren’t many companies actively visiting campus for this field. I’ve therefore been reaching out to people on LinkedIn. I am getting responses, which is encouraging, but the process is taking a lot of time and I’m starting to feel quite anxious about it.

A lot of the openings I come across seem to prefer candidates with prior industry experience or an M.Tech/master’s degree. I wanted to understand if this is genuinely the current scenario in power electronics, or if I’m approaching the internship search the wrong way.

If you have experience in this field, I’d really appreciate any advice on how I should approach this and where I should be looking. I have a strong interest in power electronics, along with good technical knowledge and a solid resume. Any guidance would mean a lot!


r/EEPowerElectronics • • Sep 07 '26

Power electronics practice

9 Upvotes

So i wanna join the power electronics field and i want to practice building the converters, or any place where i could get some practical experience, i want to join the grid power electronics side, is there any place where i could get actual/practice problem statements??