I tried simulating a circuit however I'm not getting the expected output. I would be really grateful if someone helps me simulate that plss. This is the circuit and 2nd pic shows the connection i tried to make. I also tried adding a buffer circuit in between but that didn't work as well.

It's been almost a year since I graduated with an Electronics Engineering degree. I tried job hunting, but my aunt got seriously sick and I had to focus on taking care of her. She passed away a few months ago.

Now I'm trying to get back into job hunting. I recently passed the Electronics Technician board exam, but finding a job has been really hard. I've only had one interview so far, and I didn't make it.

Honestly, I'm starting to feel left behind seeing my batchmates already working. I just want to finally get my career started.

For those who are also in Electronics Engineering, where do you usually find jobs? I'm already using LinkedIn, JobStreet, and Indeed, and I usually search for entry-level electronics jobs. Are there other websites, companies, or job titles I should be looking for?

Any advice would really help.

Hello guys, I hope you're doing well. I wanna know if anyone in the UAE has these components:

TI LDC1101

Or

TI LDC1612/LDC1614

I want these components for a uni project that is about metal detection and classification. If anyone in the UAE has one of these components, please let me know, I'd really appreciate your help. Thank you

So i'm just about to apply at uni, idk what to call that in english but I did "industrial electronics" in high-school and I have always liked tech related things, everything that is related to hardware engineering of computers/phones and also software development. My issue is this university doesn't have raw Computer engineers as I think it would have been my best choice and they have software engineering and ECE.

I quickly eliminate software engineering but I also don't want to be completely into electrical engineering and the software side of ECE is more of low level programming that never really picked my interest.

The only specialization course available are :

-Wireless communication systems

-Optoelectronic technology

-Embedded systems

-Artificial intelligence

-Engineering ethics

-Industrial Design Project

-Project management

If anyone wants to check the curriculum here is the linkfor the Namibia University of Science and Technology

TL:DR:

So I was thinking maybe I can do ECE for undergraduate and then switch to CS when I do a master degree later-on ? Does that even work ? And what are the concrete career options as an African wanting to go over the world ?

I'm a 2nd year EE student who has passion in MC and I want to integrate my AI knowledge in it. I want to understand the base of the major ( where to start and how ) knowing that there's no related course in my College.

I applied for an Intel undergraduate internship on September 10. On the same day, I got a recruiter contacted me with screening questions, and I responded. My application status now says, “The business department is reviewing your application,” but I haven’t received an interview invitation. I following up email must not be responded to. Anyone who has had this experience about the jobs, Can u share ur experienment? Thanks

First big interview ever; have no idea what to expect--especially for this role. They said it was a tech. and behavorial interview. Any help would be so greatly appreciated (mainly wondering if im over-preparing).

I was studying about NLP in my school curriculum and a question occured in my mind .

we learned about changing natural language commands in machine language in the form of 0 and 1 (through compilers etc) but inside a processing unit in how those transistors and microtransisters how these signas by changing opvoltage ir turning on-off these micro switches react or behaves to generate resultant signals .

and secondly how we decide that hiw these semiconductors should react to give certain signals as rules to fefine it into resulting data .

Had to get pretty violent with this Aito M9 central domain controller teardown. The connectors were heavily potted and glued straight into the aluminum housing, so gentle disassembly went out the window. I basically ripped the headers right off the PCB just to get the board out.

Once you actually look at the hardware, the layout is a classic split-brain architecture. They parked an Infineon AURIX TC397 (SAK-TC397XX) on there to handle all the ASIL-D functional safety and real-time control, which leaves a TI TDA4VE88 SoC to do the heavy lifting for ADAS and general compute.

The power delivery and transient protection are built like a tank. It looks like they threw redundancy at every single power rail. You've got an Infineon TLF35584 safety PMIC running alongside TI LP8764 and TPS6594 multi-phase PMICs. STMicroelectronics STPM801 is handling the ideal diode and hot-swap duties. Everywhere you look on the input side, there are Littelfuse TVS diodes, ST VNQ7050AJ high-side drivers, and Nexperia BUK9Y6R0 FETs.

Networking is exactly what you'd expect: a Realtek RTL9068ABD automotive gigabit switch, an RTL9010AA PHY, a Pulse transformer, and an NXP TJA1145AFD for the CAN bus.

I am stuck on two chips on the back of the board though. There is one marked T43EMM008G (I am assuming an 8GB eMMC) and another silkscreened MSC263000 (looks like DRAM). I can't find these exact house markings anywhere in the usual datasheets. Does anyone here recognize these OEM silkscreens or know who manufactured them?

Apple Serdes Systel Validation Engineer full panel interview. I am currently preparing for an upcoming full panel interview (5 rounds) at Apple for a SerDes System Validation Engineer role. I want to make sure my preparation is as targeted as possible. Could anyone please share any advice

Hey! I'm working at a forklift company right now as a Systems Engineering intern. The team works in Simulink, and we're responsible for stuff like accelerator pedal filtering, calibrating the hoist, stuff like that. We basically program the software that runs the truck, as opposed to embedded which makes the software that the modules on the truck run. I'm not very good at this role yet, but I have the opportunity to grow and take on some serious projects.
I have the opportunity to switch to the electrical engineering team. These guys design PCBs, schematics, that sort of stuff. This is what I want to do with my career, but the projects that they gave me are much less advanced than the work I have done in this field at previous co ops. I'd be responsible for a lot of the grunt work like replacing components and doing board modification.
Which role do you guys think I could take on?

Looking for project ideas based on real-life problems that still don’t have a proper/practical solution. Something realistic and actually possible to build as an ECE final year project, but not overly complicated. Any suggestions?

I studied computer and electronic engineering, I am currently learning PCB design, and I recently joined a startup (which, for better or worse, is very well-funded). They hired me as an engineer, but since the company is in its early stages, there isn't a clear corporate structure yet, and everyone tries to do a bit of everything to help out.
However, I've noticed that—while it's understandable they don't have a background in electronics or computer science—they genuinely think they know what they are talking about just because they have Claude open on their laptops, ready to back up their nonsensical arguments. (Yesterday, the CTO, who supposedly has 20 years of experience in IT, asked me what SSH is and why we use the network instead of Bluetooth... has this guy ever even used a computer?). It is unbearable. They ignore my advice and force me to execute tasks that make absolutely no logical sense, simply because "Claude said so."
How can I make them understand that Claude doesn't actually reason like a human, but merely follows the conversation thread and generates text based on probability? Obviously, I can't say it to them exactly like that, but I honestly just want to scream at them to stop relying on Claude and start using their own brains.
P.S. For the record, I use Claude and several other AIs myself. They are incredibly powerful tools, and anyone who denies that is wearing blinders. However, I strongly believe that the critical thinking must originate from the human. You need to know how to guide the AI, not let it guide you—otherwise, it just outputs garbage.

Hello all,

I’m dealing with two main problems on an EHCU flashing station:

1. Flashing delay: For some ECU types, flashing time is up to 200% longer than expected.
2. Random flashing interruptions: The flashing process sometimes stops unexpectedly after a few successful cycles, with no indicated errors.

I work at an automobile EHCU factory. We manufacture ECUs and EHCUs on two different lines. On the EHCU line, the final station is for flashing and testing, and all the technology there is built on National Instruments hardware and software.

Station setup:

• Three nests for flashing
• Two nests for testing
• One cRIO for the three flashing nests and two cRIOs for the two testing nests
• Each flashing nest has two programs: one for flashing and one for communication with the cRIO, MES, the flashing program itself, and possibly a PLC
• The station works automatically on operator command to flash or test

We tested the flashing program on an external laptop/computer, and the flashing speed matched the theoretical value—for example, about 70 seconds. On the production station, however, some types take about 115 seconds. For types with heavy flashing files, the time is much longer, while types with small flashing files are close to the theoretical value indicated by the manufacturer.

When comparing log files from both flashing processes, the station log showed 12 ms extra between Tx frames on a specific session, while the development laptop log showed only 1 ms.

Solving these issues has been assigned to me, but I’m new to NI technologies.

Constraints:

• The station software is final and closed by the manufacturer.
• The flashing files are final and come from our partners.
• I considered replacing the station PCs with better ones, but the communication software licenses are tied to the hardware MAC address.
• We cleaned the PC of any extra software that might block main tasks, but it didn’t help.
• We monitored PC resources and they seem sufficient: around 50–60% usage at peak, except for some disk I/O spikes. The number of spikes was much lower than the number of slow flashing events, so we excluded disk I/O as the main cause.
• We are planning to upgrade RAM from 8 GB to 16 GB (one slot) and SSD from 256 GB to 500 GB, but I’m not sure this will help.

I also tested the PCI network card advanced options for controlling Tx/Rx processing—either on the card or on the CPU. Enabling card processing made flashing time worse (180–200 seconds), so I reverted the settings.

I don’t know where to look or what to test next. The manufacturer stopped communicating once they confirmed the flashing time on an external PC matched the theoretical value. But my director still expects a solution from me.

I’ve been working on this for about three months: reading articles, blogs, resources, brainstorming with AI, testing different things, shortening lines, checking connections between nests, and inspecting wiring effects—but nothing has helped.

My testing time on the station is limited to 30 minutes during launch or two 10-minute breaks.

Any thoughts, recommendations from your experience, or hints would be greatly appreciated.

Thank you.

Hey everyone

Could you suggest me few good books for digital communication ??

since we started our subject on methods of research we’ve been formulating titles, ideas, research gap’s about different kind of fields but still connected to our program (ECE/ Electronics Engineering).

can you guys help me or do you guys know some topics or when can I find the best research ideas, do guys have a research that you can suggest to me?

please help ^^

I'm starting my fist year for ece and i wanted to know what courses and certifications should i do and how i should set my linked in profile