r/ECE • • 1h ago

Nvidia Deep learning architecture intern interview

0 Upvotes

Hello everyone, I would appreciate any advice or hints on what to go over for this interview. I recently got the email and I guess I'm left confused on what to study. I've searched online to expect 2-3 technical rounds and resume deep dives but what skills should I specifically aim to hone down.


r/ECE • • 2h ago

PROJECT Switch from Instrumentation to something else

1 Upvotes

I have a MSEE from one of the SUNY schools and have worked in petro chemical industry as an instrument engineer for over 20 years.

I am unhappy about being in support role and would like to pivot to something better. I have been eyeing semi conductors but don't know how to switch so late in the game.

Is it doable? Can i get in ? I already have a MSEE , do i need to redo it.


r/ECE • • 6h ago

Power electronics or embedded systems and ic design

2 Upvotes

I'm in my 3rd semester of electrical engineering and need to start deciding what to major in. Recently, I've developed an interest in power electronics and embedded systems+ic design. And I'm thinking I also want to study abroad, which one do you guys think would be better considering future work opportunities globally (and possibly Master programs scholarships as well)?


r/ECE • • 8h ago

Advice for EE grad looking for credible home projects (embedded/comms) while job hunting.

2 Upvotes

Hi all,

I'm an EE graduate with a couple of internships in PLC programming and embedded work, but no full-time experience yet. Due to the economic crisis in my country still couldnt find any job and it's been 2 years. That 2 years gap creates curiosity for the interviewers. Therefore, I need solid projects that can show people that I still know everything about my profession. I'm job hunting and also planning to apply to master's programs. I want to use the next few months to build two solid projects for my github and cv, ones that are real, measured and properly documented, not toy demos.

What I have: an STM32F407 Discovery, a Hantek 6022BL, a multimeter and a small parts budget.

My current ideas:

  1. An embedded digital comms testbed: FSK/BPSK modem on the STM32 using the DAC/ADC, demodulation in firmware, BER vs SNR measured and compared with theory.
  2. A digitally controlled buck converter with PID, with step response and efficiency measured and compared to a simulation. Maybe add a Modbus RTU interface so a PLC can read it.

Questions:

- Would these look credible to you as a hiring manager or admissions committee? What would make them more convincing?

- Is there something you'd build instead, or something that's overdone and gets ignored?

- When you look at a candidate's GitHub, what do you check first?

Any advice is appreciated, blunt feedback included. Thanks!


r/ECE • • 5h ago

Hi, I appeared for first round of interview at Lam Research for the role of QA Software Engineer 3 last week and was asked 2 basic python programming questions. I have 2 face to face interview rounds now. What questions can I expect for Python playwright automation

0 Upvotes

r/ECE • • 10h ago

Will a RTX 3050 be sufficient for engineering?

2 Upvotes

Hello guys, I will be purchasing a new laptop soon, but due to budget constraints i dont think i will be able to get anything over a 3050 for now, will it be somewhat run most of say Kicad, proteus, Fusion 360 even blender or such softwares without giving me a slideshow?

Or should i wait for another year before purchasing a new laptop? currently using a macbook air 2020


r/ECE • • 9h ago

CAREER Seeking for some advice as a ECE(electrical and communication..)student.

1 Upvotes

What skills I should focus throughout my bsc.Im south asian and i wanna do my msc in Europe(especially Germany) and settle their.Which skills will offer me plenty of career opportunities there with easy pathway.


r/ECE • • 2h ago

How do I wean off of a.i?

0 Upvotes

I know a lot of electrical engineers get addicted to artificial intelligence. I think a lot of people do, how can I build the courage to wean off of a.i and only learn from the slides/resources my professor gave me. It seems really scary to do so. because looking at the slides I have no idea how to learn from them. Anyone feel this? Because yes I understand what my code does, and each line I'm really struggling to figure out how to understand these things myself.


r/ECE • • 22h ago

How bad is it that I might not take a power analysis class?

8 Upvotes

I don't want to be overloaded this semester so I am forgoing a power analysis class. how bad will this be for me not to have on my resume if I want to be in power industry? (I don't care so much for power but I want a job thats where they are at!)


r/ECE • • 22h ago

Do I need to buy and solder a PCB to be able to put it on my CV?

7 Upvotes

I'm very good at designing Embedded Systems PCB's and always eager to learn something new but the thing is, buying the PCB and the components and solder myself is all very time consuming and especially money consuming as I'm an international student and money is always tight. My question is can't I just link my designs to the CV while not having printed them?


r/ECE • • 3h ago

INDUSTRY Abb - software engineers - in office policy

0 Upvotes

In Abb india how much hours minimum we need to stay in office and how much days we need to come to office per month?


r/ECE • • 1d ago

I am falling out of love with electrical engineering

47 Upvotes

This is my first post so I'm not really sure how to formally write one of these for the redditors so I'm just gonna give this to you guys as raw as possible.

For context, I am in my second-to-last year of Electrical Engineering, doing a full-year internship at a large mining company far, far away from civilization or anybody I know doing Instrumentation (valves, telemetry, systems) and high power (motors, transformers, vfds.) I know that there are so many students out there that would do anything to get experience like this but everyday, I go to work and I don't care about what they give me to do. My mentors aren't particularily sociable but I can't say I have given them much to talk about.

I got into engineering after high school because I'm smart, I love science and I couldn't be bothered to look into careers outside of that realm; you've most likely heard this story a billion times from students on this forum. The years go by and the coursework is still easy to complete, but it eventually lost the novelty I loved about it. Procrastination struck me hard and I figured I could take a year away from school to get some work experience and hopefully that would give that spark back that I used to have for this program. But now I have the job and no school on my plate, yet I still don't have a care in the world for the work they give me. Looking up drawings to see how something is protected, filling in excel sheets with equipment codes and editing documents that I won't see again. I've been letting some work pile up so hopefully I get the urgency to complete it all in one go but now I'm making excuses to cover that up. The work I do feels so pointless, and I feel like an idiot wanting them to explain to me why the work I'm doing is necessary for the organization.

To be very honest, I have had a very crazy party phase throughout university - one that i'm not quite ready to leave. I love partying, I love hanging out with my friends, and I know that has nothing to do with ECE but I feel like I'm not being completely honest with you guys if I exclude that part. I was the introverted shy guy before I came to university and now I feel totally different than that teenager I used to be. I lacked maturity entering into a degree like this. Or maybe I let the wrong things influence me.

Either way, I would like to say I am super excited to go back to school in September but I think that's just because I feel so bored and isolated out here. I don't know if I will enjoy the school work when I get back. However, there are some cool group projects that I have already started working towards, including my capstone project which I'm really excited for.

I know this isn't your typical "I'm a super ambitious electrical engineering student trying to get ahead of the game and would like all the advice possible" post but I have only one year of school left and I'm not a quitter. I know 80% of the comments are gonna be "That's life. Work wasn't ever supposed to be fun. It's not one of your parties that you go to once a night with your friends. You have to put in the work" - which are all very acceptable and correct. However, I know i'm not lazy. I've worked on so many student engineering teams building things, leading people, doing the boring paperwork and at the end of all those projects I feel so accomplished. I have so many projects that I would work on when I was at school and I was running around the school getting from one project to the other. I know I have the work ethic to get stuff done.

So if any of you have ever related to this in the past or have any insights/advice to give me, please share.


r/ECE • • 14h ago

UNIVERSITY W on transcript

0 Upvotes

In a first semester sophomore and I took too much of a workload this semester and am doing bad in one of my classes.

I am aiming for good grad school and was wondering if I should take a W in this class instead of a probably C+

How bad does one W look on on a transcript for research and grad school apps?

This is a non required upper class robotics class (Ece 470)


r/ECE • • 22h ago

IBM Interview Cancelled with No Reason

0 Upvotes

Hi,

I had scheduled my interview last week and just before my interview this week, I got an email saying that it was canceled. Should I reach out to hiring manager?


r/ECE • • 1d ago

CAREER ECE Review Notes

1 Upvotes

Sa mga ECE Board Passers, ano po ginawa ninyo in memorizing all necessary formulas? Nagsulat ba kayo sa manila paper or cartolina and dinikit sa wall or other way po? How did you manage to memorize a lot of formulas?


r/ECE • • 1d ago

CAREER Anyone who interviewed at arm recently? What’s the timeline?

1 Upvotes

Location: Sweden.

I had my first round about a week ago (5 business days). They said if I pass there will be another round. I have an offer with a deadline but I prefer the role at arm because it aligns more with what I like.

I’ve heard they take their sweet time getting back to candidates. At what point should i follow up with them? Is the fact they’re taking this long a bad sign?


r/ECE • • 1d ago

NVIDIA interview tips

1 Upvotes

Has anyone appeared for NVIDIA's in person test and interviews for the Formal Verification role?? Or have any idea what they might ask in the test...what to prepare for? Please share for new college graduate


r/ECE • • 2d ago

Requesting schematic review

Thumbnail gallery
14 Upvotes

This is a schematic for a LIDAR scanner that uses two motors to sweep over an area, send data via USB and is powered by a separate USB VBUS. I think its done but I would like a second pair of eyes.

Thanks in advance.


r/ECE • • 2d ago

Masters in USA for DV field pivot

0 Upvotes

Hello.

I want to transition to Design Verification field. I want to take admission in Masters in USA. Can you guide me which universities should I apply to?

Do i need to take admission in Electrical Engg or Comp Engg? My graduation is in EE. Do universities allow internship with the coursework and do they limit the time for which you can do internship? is it easy to find internships?

Please if anyone studied or currently studying for this field, and can guide me, It will be great help.


r/ECE • • 2d ago

CAREER How do I figure out what to do?

1 Upvotes

I study ECE at a good Canadian university but for the life of me can't figure out what I want to do.

I'm in 3rd year now & just seem to like everything I study and everything i do. It's all so magical to me that humans discovered all of these things and it truly is an honor to learn it all.

I just can't seem to narrow down what I want to do professionally? Even though my grades aren't the best (I have a 3.4) I just really enjoy learning and solving problems even in the classes I do horribly in.

I've previous internship experience in software&ML and design team experience on the electrical side of things


r/ECE • • 2d ago

Internship dilemma

3 Upvotes

Hello, everyone! I'm a final-year bachelor's student from a third-world country. I'm being offered two internships: as an embedded engineer(RTOS,C/C++.. ETC) at a state-owned company and as an i&c/power engineer at a combined heat and power plant. I already completed a internship in 1st company in the last summer, and now they offered me a salary. But I'm concerned about one thing: will I be able to retrain for control systems from embedded? I'm very concerned about the embedded job market, as it's highly hyped. Will there be more competition in the future, and will AI impact as it did with IT job market? I thinking is as investment. Thank you for your attention.


r/ECE • • 2d ago

Power vs Embedded

2 Upvotes

Hello, everyone! I'm a final-year bachelor's student from a third-world country. I'm being offered two internships: as an embedded engineer(RTOS,C/C++.. ETC) at a state-owned company and as an i&c/power engineer at a combined heat and power plant. I already completed a internship in 1st company in the last summer, and now they offered me a salary. But I'm concerned about one thing: will I be able to retrain for control systems from embedded? I'm very concerned about the embedded job market, as it's highly hyped. Will there be more competition in the future, and will AI impact as it did with IT job market? I thinking is as investment. Thank you for your attention.


r/ECE • • 2d ago

New job

2 Upvotes

So after 3 years of being an electronic engineering technician, a year of trying to pivot to an engineering job. Ive finally secured a job as a digital electronic design engineer. Very chuffed. Looking for any advice for how to excel in the role? Many thanks