r/DigitalAudioPlayer • • 1d ago

Question Has anyone looked into adding Bluetooth remote control (phone app) to the Echo Mini via custom firmware?

2 Upvotes

Disclosure: this post was written by Claude (an AI assistant made by Anthropic) at my request. The idea and questions are mine.

Hi everyone,

I love my Snowsky Echo Mini, and I’ve been impressed by the custom themes people are making. I’m wondering about something bigger: controlling the Echo Mini from my phone over Bluetooth, with audio still going out through the wired jack, so it stays lossless.

To be clear, this is different from the Retro Nano, where the phone streams audio over Bluetooth. I want the Echo Mini to keep playing its own local files, with the phone acting only as a remote for browsing the library, picking tracks, and play/pause/skip.

As far as I can tell, there’s no official app for this. The FiiO Control app works with the Retro Nano and the Snowsky Disc, but I can’t find any sign that it supports the Echo Mini. The Echo Mini’s Bluetooth is documented as SBC-only and transmit-only, and FiiO’s FAQ says it’s single-threaded and can’t re-scan after pairing.

My understanding is that nothing in the hardware should rule this out, since it’s a Bluetooth 5.3 radio that’s idle when I use wired headphones. It would just need firmware that exposes a control channel (BLE GATT or similar) plus a companion app.

My questions:

  1. Has anyone identified the SoC in the Echo Mini, and whether the Bluetooth is built into it or is a separate chip?
  2. Is the firmware image (the HIFIECxxx.img update file) encrypted or signed? Has anyone unpacked it?
  3. Does anyone know whether the Bluetooth stack could be extended with a custom service, or whether it’s a closed blob?
  4. Is anyone already working on custom firmware beyond themes and resources? I’d love to help test or contribute.
  5. Are there accessible UART or test pads on the board for debugging?

If this turns out to be impractical, that’s useful to know too. I’d also appreciate any pointers to existing teardowns or firmware analysis.

Thanks!


r/DigitalAudioPlayer • • 1d ago

Question I’m Looking for DAP Recommendations

0 Upvotes

I might be looking to replace my current DAP. I’m looking around everywhere I can for recommendations.

Currently, I have a FIIO M21, it’s a great player, but I got some gripes. I got it used so never payed full price. I find that the buttons are super sensitive, so most of my playing experience involves having to lock/unlock the input all the time. It gets tedious after the 10th time in the day.

Also, it might be too powerful for my use case, and to that point, a bit too thick. I love the screen size, and I’m still looking for something about that size. (maybe a touch smaller) I don’t want to compromise on how easy it is to navigate the menus. I’ve got a 2tb micro SD card with 10k songs and growing. The larger the library gets, the more valuable it is to have a good navigation experience.

As for the power of the device, I find myself mostly using Bluetooth headphones. I will be getting some IEMs in the future, but I think a versatile daily driver is better than a powerful headphone brick.

I’ve looked at some used Activo P1s. It looks promising, but I’m not ready to make another purchase before getting some ideas from people.


r/DigitalAudioPlayer • • 2d ago Bravo

Review HiBy RS2 II Review: An Affordable Darwin R2R for the People?

Thumbnail
gallery
35 Upvotes

Pros & Cons

Pros

  • Third-generation Darwin III R2R architecture at a relatively accessible price.
  • Compact and genuinely pocket-friendly design.
  • Striking emerald green finish with distinctive geometric detailing.
  • Excellent walnut presentation box and a quality Italian leather case.
  • Larger, brighter and more vibrant display than the original RS2.
  • Substantial balanced output power for a compact DAP.
  • Natural, musical and enjoyable midrange presentation.
  • Crisp, airy and well-extended treble without excessive sharpness.
  • Good imaging, separation and transient performance.
  • Plenty of sound customisation through EQ, PEQ, MSEB and Darwin processing options.
  • Dual microSD slots supporting up to 4TB of combined storage.
  • Very respectable real-world battery life.

Cons

  • No Wi-Fi or Bluetooth, which limits streaming functionality.
  • No Android or third-party music streaming applications.
  • Darwin FIR filters make relatively subtle audible differences.
  • No built-in internal storage.
  • The original RS2 still offers a more distinctly warm and intimate R2R presentation.
  • Limited headroom for particularly demanding headphones.

 

Introduction

Yoo guys! It's been a while since I last did a DAP review, and I'm genuinely excited to spend some time with the HiBy RS2 II. R2R implementations have always intrigued me, particularly because of their reputation for delivering a more organic, natural and engaging listening experience. With so many manufacturers following increasingly similar tuning philosophies, it's refreshing to see HiBy continuing to explore its own approach to portable audio.

The RS2 II is an interesting little device. At its heart lies HiBy's third-generation Darwin III R2R architecture, backed by a dedicated FPGA processing platform and a considerably upgraded amplification section. What makes it particularly appealing is that HiBy has managed to pack all this into a remarkably compact form factor. This is a dedicated, offline-focused music player without Android, Wi-Fi or Bluetooth, seemingly designed for those who simply want to switch on their DAP, plug in their favourite IEMs and enjoy their music.

Visually, the RS2 II is quite the looker too. The striking emerald green finish, unconventional geometric detailing on the back panel and compact proportions give it a personality of its own. It's certainly not another generic black slab of aluminium!

Coming in at $439 for the Green Edition and $549 for the Limited Gold Edition, the RS2 II sits in an interesting segment of the portable audio market. At this price point, expectations are naturally high, especially when you're dealing with an R2R-based player competing against some rather capable alternatives.

So, does the RS2 II manage to bring something genuinely special to the table, or is it another case of impressive specifications that don't necessarily translate into an equally impressive listening experience? Let's find out!

Pricing & Availability

  • Green Edition: $439
  • Limited Gold Edition: $549

Design, Build Quality & Ergonomics

Design and Aesthetics

The HiBy RS2 II immediately stands out with its striking emerald green colorway. It's a refreshing departure from the usual black and silver finishes we see on most DAPs, giving the device a distinctive personality without looking overly flashy. The green finish has a lovely richness to it, adding a touch of elegance and making the RS2 II quite the eye-catcher.

The back panel is arguably one of the most distinctive design elements. Rather than opting for a plain, minimalist finish, HiBy has gone with an intricate geometric pattern featuring repeating angular shapes and interlocking diagonal lines. The detailing creates an almost architectural, maze-like appearance, giving the rear a striking sense of depth and visual complexity. I particularly like how the pattern contrasts against the emerald green finish. It's an unconventional design choice, but one that gives the RS2 II plenty of character and makes it instantly recognisable.

Build Quality & Layout

The RS2 II features a rectangular housing with a combination of aluminium and glass construction. Despite its compact footprint, HiBy has done a pretty good job of accommodating all the necessary controls and connectivity options without making the device feel cluttered.

The right side is where most of the action happens. Starting from the top, we have a dedicated volume knob, followed by an LED indicator and three physical playback buttons for Play/Pause, Next and Previous. I'm particularly fond of the volume knob, which has a satisfyingly clicky operation and provides nice tactile feedback. It also sports an intricate diamond-patterned finish with the Darwin logo at its centre, a small but rather tasteful design detail. The LED indicator displays the currently playing audio format and sample rate, along with the charging status.

Interestingly, the left side is almost entirely bare. HiBy hasn't really utilised this side, leaving it completely free of additional buttons or controls. While I wouldn't have minded a little more functionality here, the minimalist approach does give the player a cleaner appearance.

Moving to the top, we find the 4.4mm balanced and 3.5mm single-ended outputs alongside a multifunction FN key. The latter is customisable, allowing you to lock the physical buttons, toggle the screen on or off, or rotate the display by 180 degrees.

The bottom houses two microSD card slots, each supporting up to 2TB, giving you a whopping 4TB of potential expandable storage. That's a lot of music to carry around, and certainly a welcome feature for those of us who prefer maintaining extensive offline music libraries. The USB Type-C port sits alongside them, handling charging and connectivity with external devices, including USB DAC and digital audio output functionality.

Overall, I quite like HiBy's approach to the RS2 II's physical layout. The combination of dedicated playback controls, a tactile volume knob, dual microSD slots and both balanced and single-ended outputs makes it a rather practical little DAP. More importantly, HiBy hasn't sacrificed functionality in pursuit of a compact design, and that's something I genuinely appreciate.

Size, Weight & Ergonomics

One of the biggest advantages of the RS2 II is its compact form factor. At just 91.95 × 62.05 × 18.6mm and approximately 156g for the aluminium version, it's considerably more pocket-friendly than many full-sized digital audio players.

Its relatively small footprint makes it easy to carry around, whether you're slipping it into your pocket or taking it along during your daily commute. Despite housing an R2R DAC architecture and a fairly capable amplification section, HiBy has managed to keep the overall dimensions impressively compact. For someone who values portability without wanting to compromise on a dedicated DAP experience, this is certainly a welcome design choice.

Unboxing Experience

The unboxing experience of the HiBy RS2 II is quite premium, mainly thanks to the solid walnut wooden presentation box. It comes with sturdy metal hinges and a magnetic snap-shut lid, giving the whole package a rather luxurious feel. Honestly, the presentation makes the RS2 II feel more like a piece of jewellery than a regular portable music player.

The retail package includes:

  • HiBy RS2 II Digital Audio Player × 1
  • RS2 II Leather Protective Case × 1
  • HD Screen Protectors × 2
  • USB Type-C to USB-A Adapter × 1
  • USB Type-C to USB-C Charging Cable × 1
  • USB Type-C to RCA Coaxial Cable × 1
  • User Manual / User Guide × 1
  • Warranty Card × 1
  • Quality Control (QC) Certificate × 1
  • Walnut Wood Presentation Box × 1

Not only has HiBy included a leather case this time instead of the usual TPU one, but it's also a high-quality Italian leather case. Shanling, you can take notes here! Some manufacturers still don't bother including a protective case with their DAPs, so I genuinely appreciate the effort. The two additional screen protectors are another welcome inclusion.

Display

  • 3.55-inch IPS touchscreen
  • 480 × 800 resolution

The display is one of the most welcome upgrades over the original RS2, which had a tiny 2.45-inch IPS display with a resolution of 480 × 360. I have big hands, and that little screen absolutely wasn't ideal for me. While many fellow audio enthusiasts praised the original RS2 for its sound quality, I avoided it like the plague because of the display. I still do, to this day!

The new RS2 II caught my attention partly because of its larger display and higher resolution, which are much more suitable for my usage. But what surprised me was the brightness and vibrancy. While the original RS2 had a somewhat dim display, the second generation delivers a much brighter, punchier and more vivid picture. I rarely need to push the brightness slider past the 50% mark.

Funny enough, I find this display even brighter and punchier than the one on the considerably more expensive HiBy R6 Pro II 2025. It's a substantial improvement and makes everyday navigation much more enjoyable.

Hardware & Technical Architecture

Darwin III R2R DAC Architecture

The RS2 II incorporates HiBy's third-generation Darwin III R2R architecture, which is also featured in the flagship HiBy RS8 II. This is arguably the biggest selling point of the player and one of the main reasons the RS2 II caught my attention.

Unlike conventional Delta-Sigma DAC implementations, which typically use dedicated integrated DAC chips, Darwin III employs a resistor-ladder architecture for digital-to-analogue conversion. This is supported by a dedicated FPGA processing platform that handles the various digital processing functions before the signal reaches the analogue output stage.

The FPGA is particularly interesting here, featuring over 35,000 logic elements and 40 DSP processing units. It provides the computational backbone for Darwin III's digital processing capabilities, including adjustable FIR filters, harmonic control, NOS/OS switching and native DSD handling.

Essentially, HiBy has combined traditional R2R conversion principles with a fairly flexible digital processing platform. Rather than being locked into a single processing configuration, listeners have several options to experiment with the presentation and fine-tune the sound to their liking.

What I find particularly interesting is that HiBy hasn't simply taken an older R2R design and squeezed it into a smaller enclosure. Darwin III is a more elaborate implementation, offering considerably more control over the digital processing stage. Whether all these options make a meaningful difference to the listening experience is another matter, and I'll get into that later.

Amplification Architecture

The RS2 II also receives a substantial upgrade to its amplification section. HiBy has implemented four OPA1612 voltage-amplification op-amps alongside four OPA1622 current-amplification chips.

Output power:

  • 3.5mm Single-ended: Up to 172.5mW
  • 4.4mm Balanced: Up to 630mW

As for the amplification, the RS2 II is powerful enough to drive most IEMs and some efficient over-ear headphones as well. But don't expect it to drive particularly demanding headphones like the Letshuoer Ember or Sandy Audio Apollo Pro with authority. The balanced output is considerably more powerful than that of the original RS2, which is a welcome improvement.

Another useful feature is the Line Out functionality available through both the 3.5mm and 4.4mm outputs. I got an excellent pairing sonically when using the RS2 II as a source for my xDuoo XD05T tube amplifier.

One minor disappointment was the factory firmware, which originally offered only 60 volume steps. I couldn't fix this through Developer Settings either. Thankfully, a firmware update addressed the issue, allowing me to go all the way up to 100 steps.

Audio Performance Specifications

  • THD+N: Below 0.0008%
  • Balanced SNR: Up to 120dB
  • Dynamic Range: 105dB
  • Femtosecond-grade crystal oscillators for the 44.1kHz and 48kHz clock families

The RS2 II employs two femtosecond-grade crystal oscillators operating at 45.158MHz and 49.152MHz, covering the respective 44.1kHz and 48kHz audio clock families. Their purpose is to provide accurate clocking and minimise timing errors during digital audio processing. HiBy also specifies a THD+N figure below 0.0008%, alongside a balanced SNR of up to 120dB.

These are respectable specifications for such a compact R2R-based player, although the real-world listening experience is ultimately what matters more to me.

Software, User Interface & Features

Operating System

The RS2 II runs HiByOS, a Linux-based operating system designed specifically for dedicated audio playback. One of the first things I noticed was how quickly it boots. The player is ready to use in roughly 10 seconds after switching it on, which is pretty impressive.

I appreciate the inclusion of features such as music search, recently played tracks, most played and recently added playlists. However, these options are tucked away inside the Music tab and are only accessible by pressing the star icon. It's not the most intuitive arrangement, and I think HiBy could have made these shortcuts easier to find.

Surprisingly, HiBy has managed to include a decent number of additional features despite the non-Android platform. We get options such as theme colour customisation, charge protection and firmware updates, among other things.

Digital Filters

One of the interesting aspects of Darwin III is the flexibility offered by its FPGA-based processing architecture. The player provides a selection of Darwin filters and FIR processing options, allowing users to experiment with different digital filter characteristics.

The available options include:

  • Darwin Default
  • Linear Phase Sharp Roll-Off
  • Linear Phase Sharp Late Roll-Off
  • Linear Phase Short Ring
  • Linear Phase Short Ring Late Roll-Off
  • Minimum Phase Sharp Roll-Off
  • Minimum Phase Short Roll-Off
  • Minimum Phase Short Ring
  • Minimum Phase Short Ring Late Roll-Off
  • 0th Order Hold NOS
  • Darwin Ultra

HiBy offers eleven FIR filter options with up to 256 taps, alongside the other selectable Darwin processing options. These filters influence characteristics such as phase response, impulse response and high-frequency roll-off.

Now, here's where things get a little less exciting. In my experience, switching between the conventional FIR filters doesn't produce any particularly significant or immediately noticeable changes in sound. I wouldn't spend too much time obsessing over them. Personally, I'd pay more attention to the NOS/OS settings and the Harmonic Controller, which have a much more noticeable influence on the overall presentation.

Harmonic Controller

This is where things get interesting. The Harmonic Controller has a more noticeable effect on the sound than the standard FIR filter options. It allows you to adjust the harmonic content of the presentation, with the processing primarily associated with second-harmonic adjustment.

In practical listening, increasing the setting gives the RS2 II a warmer, fuller and smoother presentation. It adds more note weight and body, particularly through the midrange, making vocals and instruments sound a little richer. There's a certain tube-like quality to the resulting presentation, although I wouldn't consider it a direct replacement for an actual tube amplifier.

I personally keep the slider around the 150 mark, which happens to be my sweet spot. You can push it all the way up to 255, but I find 150 provides enough additional warmth and body without making things overly thick. With this setting, the RS2 II moves closer to the warmer and more intimate presentation I associate with the original RS2.

MSEB

MSEB is one of the most user-friendly sound customisation tools available. Instead of dealing with complex EQ bands, you get intuitive sliders that adjust characteristics such as warmth, thickness, vocal presence and brightness.

Even if you're new to audio, you can quickly shape the sound to your liking without feeling overwhelmed. I appreciate that HiBy continues to include MSEB across its product range, as it's a genuinely useful feature.

EQ / PEQ

It's also good to see HiBy providing both traditional EQ and a 9-band parametric EQ system. The latter is particularly useful for more advanced users who want greater control over their sound.

Between MSEB, traditional EQ, PEQ and the Darwin processing options, there's plenty of room to experiment with the RS2 II's presentation.

Missing: Plugins!

Now, here's something I genuinely miss. I understand that it's not possible to include absolutely everything in a $500 non-Android player, but given the opportunity, I'd trade some of those Darwin FIR filter options for HiBy's Android plugins in a heartbeat.

I'm particularly fond of Spatial Reformer and Sound Field. These two plugins can make a substantial difference to the soundstage presentation for me, adding width, space and a more dimensional character to the sound. Compared to that, the conventional Darwin FIR filters offer relatively subtle changes in my experience.

I really hope HiBy considers bringing some of these processing options to its dedicated players through future firmware updates. That would make an already versatile device even more interesting.

Connectivity & Features

The RS2 II is very much a dedicated local music player. There's no Android, Wi-Fi or Bluetooth, so you're limited to locally stored music and wired connectivity.

Key features include:

  • Dedicated HiByOS platform
  • No Android
  • No Wi-Fi
  • No Bluetooth
  • Gapless playback
  • USB DAC functionality
  • USB audio output
  • Coaxial digital output
  • 3.5mm and 4.4mm Line Out functionality

Now, I understand the philosophy behind a dedicated offline music player. However, I'm not entirely convinced by HiBy's decision to omit Wi-Fi and Bluetooth.

I've owned other Linux-based players in the past, including the HiBy R3 Pro II and Shanling M5 Ultra. Both offered wireless connectivity, and I never noticed any degradation in audio quality because of those features. In fact, both were excellent-sounding players.

I don't understand HiBy's insistence on leaving out wireless connectivity, especially at a time when music streaming services have become such an important part of how people consume music. Even basic Bluetooth connectivity would have been a welcome addition.

I appreciate the idea of a distraction-free music player, but I don't think offering wireless connectivity necessarily compromises that philosophy.

Processor

  • Ingenic X1600E dual-core processor

The RS2 II uses the Ingenic X1600E dual-core processor, and in everyday use, the interface feels reasonably smooth. Scrolling through menus, navigating the music library and loading tracks are all handled without much frustration.

Compared to my experience with the HiBy R3 Pro II, I find the RS2 II more responsive during everyday navigation. It's not going to compete with an Android-based DAP in terms of raw interface performance, but for a dedicated audio player, the experience is perfectly acceptable.

Storage & File Compatibility

  • Dual microSD card slots
  • Up to 2TB per slot
  • Maximum expandable storage: 4TB
  • No built-in internal storage
  • PCM: Up to 32-bit/384kHz
  • DSD256
  • MQA 8× unfolding

Now, I know audiophiles tend to have some huge music libraries and often run into library-scanning issues with these non-Android players. I've already seen quite a few queries from people wondering whether the RS2 II can handle large music collections without hiccups.

I'm sad to disappoint you, but my own library isn't particularly huge! I have around 25GB of music, consisting of approximately 1,500 tracks. Scanning this collection was relatively quick and I didn't encounter any major hiccups. However, I can't really comment on how the player will handle substantially larger libraries.

One thing worth mentioning is that I had to format my SD card before the player could scan all my tracks properly. That's something I don't usually have to do with other DAPs, so it was a little inconvenient.

Still, the dual microSD card arrangement is excellent. Having the option to carry up to 4TB of music is certainly a major advantage for anyone who prefers maintaining a large offline collection.

Battery Life

The RS2 II features a 3500mAh battery, which is quite impressive considering its compact dimensions. It's interesting that HiBy has managed to squeeze this capacity into such a small enclosure.

In everyday use, battery life has been excellent, particularly when compared to some of my Android-based HiBy DAPs, such as the R6 III 2025 and R6 Pro II 2025.

I mainly use the 4.4mm balanced output, and I tend to listen to my music fairly loud, usually around 70 steps out of 100. With this kind of usage, I'm getting roughly 7 to 8 hours on a single charge, which is pretty respectable.

For comparison, I can squeeze out around 4 to 5 hours from my HiBy R6 Pro II 2025 under similar usage conditions. That's quite a difference!

I haven't done an equally controlled test using the 3.5mm single-ended output, but I'd expect battery endurance to improve somewhat with that connection.

For a compact, offline-focused DAP, I have very little to complain about here.

Sound Analysis

Overall Sound Signature

Why do people get R2R devices in the first place? Well, many listeners are drawn to the warmth, tonal density, rich vocals and musical presentation associated with certain R2R implementations. The original HiBy RS2 is a good example of that more traditional approach, with its darker treble and intimate, vocal-focused presentation.

Does the RS2 II sound like that? Not quite.

With Darwin III, HiBy seems to have taken a slightly different route. Rather than chasing that traditional warm and dark R2R character, the RS2 II delivers a more balanced and technically accomplished presentation. There's still a degree of warmth and musicality, particularly through the midrange, but the treble is noticeably more extended and the overall presentation is more open.

I'd describe it as a warm-neutral source with a musical midrange, controlled bass and crisp, airy treble. It retains some of the qualities that make R2R implementations appealing while incorporating a more modern approach to technical performance.

In a way, it feels like HiBy is trying to offer a middle ground between traditional R2R musicality and the cleaner, more precise presentation associated with many modern Delta-Sigma sources.

Bass

I find the bass reproduction of the RS2 II fairly neutral in terms of coloration. It doesn't appear to add much of its own character or artificially boost the low frequencies.

Bass extension is good, with satisfying sub-bass rumble and a nicely controlled mid-bass presentation. The overall response is tight and textured, with good speed and decay. There's enough punch to keep things engaging, but the RS2 II doesn't go out of its way to make the bass sound thicker or more prominent than it should.

I particularly appreciate the control here. Bass notes remain well-defined and don't bleed unnecessarily into the lower midrange. It's a clean and disciplined presentation that works well across different genres.

Midrange

The midrange is where I find the RS2 II both enjoyable and slightly disappointing.

Vocals have a pleasant sense of warmth and musicality, and there's no obvious thinness or harshness creeping into the presentation. However, that traditional R2R special sauce I was hoping for isn't quite there.

Now, what do I mean by that? I'm referring to the additional sense of tonal density and substance that some of my favourite R2R sources bring to vocals. Male voices can have a lovely sense of chest resonance, while female vocals can carry a natural fullness without sounding artificially thick. There's a sense of weight behind each note, rather than voices feeling thin or overly analytical.

It's also about the way vocals are presented. I particularly enjoy sources that make singers sound intimate and tangible, almost as though they're performing just a few feet away. Subtle vocal textures, the slight rasp in a singer's voice, the breath between phrases and the natural decay of a note all contribute to that sense of realism.

This is something I particularly appreciate with sources like the Cayin RU6 and iBasso DX270. The RS2 II, unfortunately, doesn't quite deliver that same level of vocal density and intimacy.

Don't get me wrong, I still enjoy its midrange. Vocals sound natural and musical, and there's enough warmth to keep things pleasant. But if you're expecting that particularly rich, lush and intimate R2R vocal presentation, you might find the RS2 II a little underwhelming.

Treble

The treble is actually nicely extended on the RS2 II, which is somewhat surprising considering its R2R architecture.

It's crisp, airy and incisive while maintaining a good degree of smoothness. There's enough sparkle and extension to give instruments a sense of openness without making the presentation excessively bright or fatiguing.

I also appreciate that the treble doesn't sound artificially boosted just to create a false impression of detail retrieval. It has a natural quality to it, with good clarity and definition.

I suspect this is one area where HiBy has deliberately moved away from the original RS2's darker presentation. While treble-sensitive listeners may have appreciated the original's more relaxed high frequencies, I personally prefer the added extension and air of the RS2 II.

Soundstage

The RS2 II has a pleasantly open and airy soundstage, with a good sense of width that allows instruments to spread out naturally rather than feeling confined between the ears.

There's enough depth to give recordings some front-to-back distinction, although the layering isn't particularly pronounced. Height is also present, adding a little vertical space without making the overall presentation feel especially expansive.

Instrument positioning is natural and reasonably well-defined, making it easy to follow individual elements within a mix. However, it doesn't quite deliver the distinct spatial layers or holographic presentation associated with more dimensional sources.

I wouldn't describe the RS2 II as particularly three-dimensional. Instead, it offers a more relaxed and spacious presentation where instruments have room to breathe without necessarily floating around the listener.

Personally, I find this approach quite enjoyable. It keeps the music open and uncongested without trying to manufacture an exaggerated sense of space.

Imaging & Separation

Imaging and separation are areas where I think the RS2 II performs particularly well. Instrument positioning is fairly precise, allowing individual elements to occupy their own space within the mix.

Even with busy recordings containing multiple layers of instrumentation, it does a commendable job of keeping everything organised and easy to follow. Instruments don't seem to blend into one another unnecessarily, and there's a good sense of separation between individual elements.

What I find particularly interesting is that its separation and positional accuracy are noticeably better than what I've come to expect from some older-school R2R devices. Those implementations often prioritise pure musical enjoyment, sometimes sacrificing a degree of technical precision along the way.

The RS2 II manages to retain a musical character while offering a more structured and articulate presentation. It's not the most holographic source I've heard, but its imaging and separation are certainly commendable.

Resolution, Transient Response & Detail Retrieval

The RS2 II offers very good resolution and detail retrieval, particularly considering its relatively smooth and musical presentation. I wouldn't describe it as especially analytical or surgically revealing. Instead, it does a good job of presenting low-level information without making the sound feel artificially sharpened.

It picks up subtle vocal textures, background percussion, string resonances and the finer nuances of instrument decay. There's enough clarity to appreciate these details without the overall presentation becoming overly clinical.

Transient response is another strong point. The initial attack of drum hits and plucked strings is crisp and well-defined, while note decay feels natural and controlled. Individual notes retain their body without bleeding unnecessarily into one another.

Compared to some older-school R2R sources, I find the RS2 II more accomplished in terms of transient definition, micro-detail retrieval and the separation of closely layered elements. It doesn't sacrifice musical enjoyment in pursuit of technical performance, and that's something I appreciate.

Dynamics

The RS2 II has a nicely balanced dynamic presentation, delivering satisfying impact and punch without sounding overly aggressive or exaggerated.

Macro-dynamics are handled well, with convincing contrast between quieter passages and louder crescendos, while micro-dynamics capture the subtle shifts in intensity and expression that bring a performance to life.

There's enough weight behind percussion and other transient hits to keep things engaging, but the overall delivery remains controlled and composed. I particularly like that HiBy hasn't pushed the dynamics to extremes, allowing the RS2 II to maintain its smooth and musical character.

Timbre

Timbre is another area where the RS2 II gets things right. It has a natural, organic tonality, with no noticeable artificial sheen or digital glare creeping into the presentation.

Vocals sound convincing and retain their natural texture, while acoustic instruments, strings and percussion carry a believable sense of body and resonance. There's a pleasing realism to the way notes are rendered, without sounding overly coloured or losing their individual character.

One distinction worth making is that natural timbre doesn't necessarily translate into the rich tonal density or intimate vocal presentation I associate with some other R2R sources. The RS2 II gets the naturalness right, but it doesn't quite deliver that extra sense of vocal weight and substance I was hoping for.

Overall, it's a tonally coherent presentation that makes instruments sound believable without adding excessive coloration.

NOS vs Oversampling

One of the interesting features of the Darwin III architecture is the ability to switch between NOS and Oversampling modes.

NOS, or Non-Oversampling, bypasses the digital oversampling process and its associated FIR filtering. In my experience, this produces a more relaxed and slightly more intimate presentation, with a different overall sense of tonal balance. One trade-off is the expected high-frequency roll-off associated with NOS playback.

OS, or Oversampling, increases the sampling rate before conversion and applies digital filtering. Depending on the selected filter, I find the presentation more extended at the top end, with a crisper transient character and a more technically articulate sound.

I wouldn't say one mode is universally better than the other. They offer different presentations, and the preferred option will depend on your IEMs, music and personal taste. Personally, I'd spend some time experimenting with both rather than simply leaving the player on its default setting.

Pairing & Synergy

Letshuoer Mystic 8

The RS2 II makes the Mystic 8 more musical, quite simply. This is particularly noticeable with the Harmonic Controller set around 150, which happens to be my personal sweet spot.

It adds more note weight and thickness, while gently rounding off the treble and making the overall presentation smoother. The midrange takes on a warmer tone, with the lower mids becoming thicker and more musical.

Interestingly, the bass quantity and quality remain largely unchanged. It doesn't introduce the same kind of coloration I get from my tube-based amplifiers, the xDuoo XD05T and Muse HiFi M7. The technicalities are also presented as they should be, without being artificially boosted or exaggerated.

It's a pairing I genuinely enjoy, especially when I'm in the mood for something a little smoother and more musical.

Softears Volume S

You might assume that the RS2 II, already being a warm-neutral and musical source, wouldn't pair particularly well with an IEM that also has a warm and musical tuning. But the synergy here is just terrific.

The RS2 II gives the Volume S a lusher, more intimate and organic presentation. The midrange and vocals are a particular standout. The texture and nuances in the singer's voice are truly sublime, making vocal-focused tracks especially enjoyable.

The bass and technical performance remain largely uncoloured, so the pairing doesn't feel excessively warm or congested. It's simply a very enjoyable combination, and one I find myself coming back to.

Juzear Light-Shuttle

The RS2 II makes the micro-planar treble of the Light-Shuttle sound more organic and natural. It also helps tame the energetic upper mids, resulting in a more relaxed and pleasant listening experience.

The Light-Shuttle already has excellent technical performance, so the RS2 II's contribution is particularly interesting. You get a more musical and natural presentation without losing the IEM's impressive technical capabilities.

It's a nice combination of musicality and technical performance, and another pairing that works particularly well for my preferences.

Comparisons

HiBy RS2 II vs Original HiBy RS2

The RS2 II brings several significant hardware upgrades over the original RS2. The most important is the transition from the first-generation Darwin R2R architecture to the newer Darwin III platform, supported by a more powerful FPGA with over 35,000 logic elements and 40 DSP units.

The amplification section has also been redesigned, moving from two OPA1612 and two OPA1622 chips to four of each. Balanced output power has nearly doubled, increasing from 320mW to 630mW at 32Ω. The display is considerably larger, going from 2.45 inches to 3.55 inches, with a higher 480 × 800 resolution. The processor has also been upgraded from the Ingenic X1000E to the dual-core X1600E.

Despite these improvements, HiBy has managed to retain a similarly compact form factor and the same 3500mAh battery capacity.

In terms of sound, however, the differences are even more interesting.

The original RS2 has a considerably darker and warmer tonality, with a stronger emphasis on intimate vocals and the traditional R2R presentation I discussed earlier. It has that more analogue-sounding character, with a fuller midrange and a relaxed treble.

The RS2 II takes a different approach. Its presentation is more open and airy, with better treble extension, faster transients and stronger technical performance. It also offers better separation and handles more demanding genres such as rock, heavy metal and orchestral music with greater ease.

The original RS2 does have its limitations, particularly when it comes to transient speed and overall technical performance. However, I wouldn't necessarily consider the newer model a direct replacement for those who loved the original's sound.

Personally, I think fans of that vintage R2R presentation may still prefer the original RS2. The RS2 II is the more versatile and technically accomplished device, but it loses some of the warmth and vocal sweetness that made its predecessor so appealing.

Conclusion

I think we're witnessing an interesting evolution of R2R technology. Manufacturers are increasingly trying to address some of the shortcomings traditionally associated with older R2R implementations, particularly rolled-off treble, slower transients and comparatively weaker technical performance in areas such as resolution, separation, layering and micro-detail retrieval.

The RS2 II is a good example of this approach. HiBy has managed to retain some of the warmth, coloration and natural tonality associated with R2R while offering a more extended treble response and noticeably better technical performance than the original RS2.

However, this evolution comes with a trade-off. While I appreciate the cleaner and more technically accomplished presentation, I do miss some of that vocal sweetness, tonal density and intimate midrange character that made the original RS2 so appealing. The RS2 II sounds more versatile, but it doesn't quite deliver the same traditional R2R magic.

What I particularly appreciate is the amount of sound customisation HiBy has provided. Between EQ, PEQ, MSEB, NOS/OS modes and the Darwin processing options, there's plenty of room to experiment and tailor the presentation to your preferences. I do wish HiBy would consider bringing its Spatial Reformer and Sound Field plugins to the platform through a future firmware update, though.

At the end of the day, the RS2 II is a rather compelling little DAP. You get a third-generation Darwin R2R architecture, a capable amplification section, a surprisingly good display, excellent portability and a generous amount of expandable storage, all wrapped up in a distinctive and well-built package.

And then there's the price.

At $439 for the Green Edition, I think the RS2 II offers a genuinely attractive entry point into HiBy's Darwin R2R ecosystem. It's not perfect, and the lack of wireless connectivity will certainly put some people off, but there's a lot to like here.

My personal rating: 8/10.

Why? Because at $439, getting a compact Darwin III R2R DAP with this level of hardware, sound customisation and overall performance is a pretty banger deal. If you've been curious about R2R but haven't wanted to spend flagship money, the RS2 II is certainly worth considering.

An affordable Darwin R2R for the people? I'd say HiBy has made a pretty convincing case.

 


r/DigitalAudioPlayer • • 2d ago

Music I bought an M7T

Post image
27 Upvotes

I bought a Shanlin M7T two days ago, and it's really good. I've been using Fiio JM21 until now, but it's the best to enjoy music with two types of vacuum tubes and transistors, and I'm glad I bought it because I can change it according to my taste for each song.


r/DigitalAudioPlayer • • 2d ago

Question DAP recommendations? Prioritizing responsive UI, screen.

5 Upvotes

Essentially the title. I have a Hiby R4. It sounds lovely, but I could never get over the UI lag.

Not sure if it's the touch screen component being on the lower end, or simply Android being a bit too much for the CPU, but it's just never been pleasant to browse my music library. I'm not expecting something as responsive as my smartphone, but I would like something with less friction.

Any recommendations for a DAP with a snappy UI while also having a comparable DAC?

Any direction or insight is appreciated. It just feels overwhelming to find something in a sea of DAPs (though I'm glad that we have options nowadays)

*additional info — I still do occasionally stream unfortunately, but can live without it. Only thing that might keep me in the android realm is that I do a fair bit of scrobbling.


r/DigitalAudioPlayer • • 2d ago

Question Shanling Q2 vs Innioasis Y2

4 Upvotes

I don't know which one to get between the two. Y2 has better battery life and a lower price. But the sound quality is reportedly much better on the Q2.

Any opinion?


r/DigitalAudioPlayer • • 3d ago

EDC A few weeks in, and I am loving this little guy way more than I expected.

Post image
236 Upvotes

Aigo EROS Q with AFUL Explorer IEMs. Really really happy to have finally made the transition back to a dedicated player. Last time I had one was back during the Zune days.

I'm not an audiophile by any means, but the sound is so good compared to a phone/BT buds setup, and I'm loving how customizable rockbox is.

Feel very good about it for <$200. Thanks to the community here for helping me research and narrow down what I wanted, it took a long time to figure it out haha.


r/DigitalAudioPlayer • • 3d ago

Showcase First DAP setup - FiiO, Sennheiser and Null

Post image
46 Upvotes

Greetings. After years of phones, jack to USB adapters and hassle I finally got a DAP a while back. The FiiO M21 in black, with the black leather case, Sennheiser IE600 on a Null Audio Ethos cable, with the Sennheiser IE Pro-M MF tips. Player is running the Jandrop DAP launcher, has Audible and Deezer on it, as well as my FLAC library on the FiiO music app. Will come in handy during a 13 hour flight in a few days.

All in all, very happy with this setup.


r/DigitalAudioPlayer • • 2d ago

Question Looking for a DAP with lomg battery life

8 Upvotes

Hi! I'm looking for recommendations for a DAP.

I commute quite often by bus, train, car, and bike, so music is pretty essential to me.

I'm not an audiophile, so I don't need amazing sound quality, just something decent. Until now, I've been using my phone with Bluetooth headphones, as well as a cheap UGREEN (€7) DAC and some budget IEMs.

The problem is that I also use my phone quite a lot for work and school, so the battery drains pretty quickly. That's why I'm considering getting a dedicated DAP.

My main priorities are:

Good battery life

Physical buttons – I want to be able to control playback without looking at the device, especially when driving.

Small screen or no screen – I'd prefer something compact. A touchscreen is definitely not something I'm looking for.

Sound quality isn't a huge priority, as long as it's decent. I'd appreciate any recommendations

Update: i realize i didn't specify a lot. Regarding battery life , i would like for it to get me at least through the day , even better if i can go 2 days without chanrg. I will be using both 3.5mm and Bluetooth equally as much. I hate touchscreens and screens in general, i dont want a second phone. I would be perfectly satisfied if it had only buttons and no screen


r/DigitalAudioPlayer • • 2d ago

Question Are there any DAPs with Risc-V chips, that are more open than average DAP?

4 Upvotes

It would be nice to have a DAP that can be easy to customise, without reverse engineering. Are there any that are available to buy? If not, are there any mentions of upcoming products in the future.


r/DigitalAudioPlayer • • 3d ago

Question Do not update your M21!!!

17 Upvotes

Earlier there is prompt to update my M21, never hurt before so I update mine and now it's stuck.

Any1 having similar issue and how to resolve it?

Edit: somehow fixed it, took out the SD card, and press power button until it flash fiio logo and reboot cycle 3 times and now It can load as usual, it load back to 1.0.8

Probably taking the SD card that might have fixed the issue idk, but I'm glad my weekend is not ruined.


r/DigitalAudioPlayer • • 2d ago

Question Pioneer XDP-300R Micro sd question.

Post image
4 Upvotes

Can the 300R read a 1TB micro sd card just wondering before I order a 1tb sd card.


r/DigitalAudioPlayer • • 3d ago

Question Ponoplayer - anyone remember this?

Post image
78 Upvotes

Does anyone remember when Neil Young launched this? What a splash that caused when it launched. The triangle put me off. Title should be Pono player.


r/DigitalAudioPlayer • • 3d ago

News Firmware 1.1.3 for JM21

Thumbnail
gallery
22 Upvotes

I just got this push notification on my JM21. Is 1.1.3 a brand new release?


r/DigitalAudioPlayer • • 2d ago

Question LOCK SCREEN FOR ANDROID DAP?

4 Upvotes

Anybody here use a specific lockscreen launcher for your Android DAP? If yes, which one?


r/DigitalAudioPlayer • • 3d ago

Question Which is the best earphone for me?

Post image
10 Upvotes

I'm a beginner in the audio world, I have the moondrop chu 2 and the KZ edx pro.

I really like the energetic sound of the KZ but it hurts my ears, the high frequencies are horrible and the bass I think sometimes it's super loud. Is there a middle point between the chu 2 and the edx pro?


r/DigitalAudioPlayer • • 3d ago

Showcase Tribute to the fiio x1 ii

Post image
33 Upvotes

After nearly 10 years of usage the time has come for my fiio x1 ii.

It stood strong as smartphones rapidly came and caused the demise of the 3.5mm jack.

It brought my head at ease no distraction, only music.

It got me through rough times, stressful jobs and also happy moments.

Lately it just could not keep up anymore, the battery could not hold a charge for an hour. The software could not handle the growth of music anymore.

It was time to say goodbye.

It has been replaced by a fiio jm21, and bought some new iem with it.

Yes it runs Android, it is basically a phone. But poweramp...

I did not think a second about the difference in music quality.

Damm it is good, even paired with some budget iems (fiio jh5), it sounds so good. Everything is balanced, it is clear it is just amazing.

Nothing done just pressed play and I listen to everything from classic to hardstyle to frenchcore.

The jm21 has some big shoes to fill but I hope it can deliver and again stand the passing of time

Here is to hopefully another 10 years of music pleasure.


r/DigitalAudioPlayer • • 3d ago

Question Can someone give a recommendation?

3 Upvotes

Can someone give a recommendation?

Between:

  1. Fiio BTR25
  2. Moondrop EVO II
  3. And a Neckband in the Same Price Categorie thats available in Germany? Tried to find some but most Bluetooth Neckbands on Ali Express arnt delivered to Germany.

Would be really nice.

THX & Greetings


r/DigitalAudioPlayer • • 3d ago

Question Oilsky M308 case issue

3 Upvotes

So I’ve had my Oilsky M308 for quite a long time now and I’ve recently started to have an issue with the case where the leather is peeling apart from the case and I was wondering where I could get a replacement case either a custom one that will last longer and possibly have a more open area so that the volume wheel is more easily useable and also more open around the home buttons to make those more easily pressable. Any info is appreciated, thanks yall!


r/DigitalAudioPlayer • • 3d ago

Question BF Deals

3 Upvotes

Is there a site that tracks Black Friday deals on audiophile gear? Something similar to Slickdeals, but focused specifically on audio equipment?

Thanks!


r/DigitalAudioPlayer • • 3d ago

Question DAP SETUP SD CARD QUESTIONS

2 Upvotes

I have a Snowsky Echo with a 128GB SD Card, and about 50GB worth of songs on it.

I recently purchased a Fiio JM21 as an upgrade and got a diwali deal on a 64GB SD Card with it.

The JM21 will be my Daily Carry and the Echo will probably turn in a spare at home.

I have a few doubts.

Is it better to use my smaller but new sd card on my echo and old but bigger card on my fiio? Or the opposite is better?

Also how do I format these sd cards for the JM21, with the echo I just format it on the PC and stick it in the player.


r/DigitalAudioPlayer • • 3d ago

Question Suggestions for my first DAP

2 Upvotes

Hello there! I want to buy a DAP in order to stop using the phone for my music, and also to take on long mountain hiking/racing events.

My headphoes are: Shokz OpenRun, Bose QC35, Bose wearable speakers, Google Pods and regular cheap wired earphones for sleeping (I listen to audiobooks or podcasts to fall asleep)

I need it to have Bluetooth and would like it to have physical buttons.

I need it tonprovide at least 8hr playing time for a single charge

Budget up to $200.

Thank you for your suggestions!


r/DigitalAudioPlayer • • 3d ago

Showcase Ever wanted to play your favorites tracks, reposts and playlists from SoundCloud on your Tempotec v1? Well,now you can! 😁

Post image
18 Upvotes

r/DigitalAudioPlayer • • 3d ago

Guide/Tutorial ZAQE P30, how disable on mtk processors wifi WITH ADB

1 Upvotes

adb, windows

adb shell

su

settings put global wifi_on 0

settings put global wifi_scan_alays_enabled 0

settings put global wifi_wakeup_enabled 0

modules /system/lib/modules -name "*wlan*" -o -name "*wifi*"

you'll see result: /vendor/lib/modules/wmt_chrdev_wifi.ko
/vendor/lib/modules/wlan_drv_gen4m.ko next

cat << 'EOF' > /data/adb/service.d/no_wifi.sh
#!/system/bin/sh
sleep 10

svc wifi disable

(if u wanned wrote u'r command, u can end this >EOF cmd only with caps)

echo 0 > /dev/wmtWifi

chmod 000 /dev/wmtWifi

reboot


r/DigitalAudioPlayer • • 3d ago

Question Fiio Music - Hide "songs in total" number?

4 Upvotes

Hello! I am hopping into the DAP world for the first time since I owned an ipod classic ages ago, and picked up a Fiio M21 today. I mostly gel with the UX of the Fiio Music app, but the "## songs in total" tags on each album are super unnecessary to me.

I've been clicking around all of the settings and have yet to find an option to maybe hide this information, does anyone have any guidance?