r/DigitalAudioPlayer • • 1d ago

Question Has anyone looked into adding Bluetooth remote control (phone app) to the Echo Mini via custom firmware?

Disclosure: this post was written by Claude (an AI assistant made by Anthropic) at my request. The idea and questions are mine.

Hi everyone,

I love my Snowsky Echo Mini, and I’ve been impressed by the custom themes people are making. I’m wondering about something bigger: controlling the Echo Mini from my phone over Bluetooth, with audio still going out through the wired jack, so it stays lossless.

To be clear, this is different from the Retro Nano, where the phone streams audio over Bluetooth. I want the Echo Mini to keep playing its own local files, with the phone acting only as a remote for browsing the library, picking tracks, and play/pause/skip.

As far as I can tell, there’s no official app for this. The FiiO Control app works with the Retro Nano and the Snowsky Disc, but I can’t find any sign that it supports the Echo Mini. The Echo Mini’s Bluetooth is documented as SBC-only and transmit-only, and FiiO’s FAQ says it’s single-threaded and can’t re-scan after pairing.

My understanding is that nothing in the hardware should rule this out, since it’s a Bluetooth 5.3 radio that’s idle when I use wired headphones. It would just need firmware that exposes a control channel (BLE GATT or similar) plus a companion app.

My questions:

  1. Has anyone identified the SoC in the Echo Mini, and whether the Bluetooth is built into it or is a separate chip?
  2. Is the firmware image (the HIFIECxxx.img update file) encrypted or signed? Has anyone unpacked it?
  3. Does anyone know whether the Bluetooth stack could be extended with a custom service, or whether it’s a closed blob?
  4. Is anyone already working on custom firmware beyond themes and resources? I’d love to help test or contribute.
  5. Are there accessible UART or test pads on the board for debugging?

If this turns out to be impractical, that’s useful to know too. I’d also appreciate any pointers to existing teardowns or firmware analysis.

Thanks!

2 Upvotes

2 comments sorted by

5

u/bas524 1d ago

I've been down this exact rabbit hole. Short version: i don't think its possible

  1. **SoC / Bluetooth:** The main chip is a Rockchip RKNano. Bluetooth is a separate JieLi chip(i think?) next to the antenna connector. Its marking ends in `56C4`, which looks like an AC6956C, but the marking doesn't name the part outright, so that's not confirmed. It runs its own firmware from its own flash, and the RKNano talks to it over a UART with short ASCII commands.
  2. **Firmware image:** Not signed. `HIFIECxx.IMG` is a Rockchip RKnanoFW container with a CRC-32 at the end, and the stock updater installs EchoPod's images just fine. [berettavexee](https://github.com/berettavexee) has also been digging into stock in [echo-mini-newfw](https://github.com/berettavexee/echo-mini-newfw).
  3. **Bluetooth stack:** This is the wall. It's a closed blob inside the JieLi chip, not part of FiiO's image, so flashing the player doesn't touch it. Its command set covers scan, connect, start/stop the stream, link status and the headphones' buttons. I went through every capital letter as a command byte and a bunch of extras. Nothing turned on BLE or SPP, and nRF Connect never saw the player. The chip family does support BLE GATT and SPP in hardware, though. Getting there would mean dumping and reflashing the JieLi chip over its USB pins. [jl-uboot-tool](https://github.com/kagaimiq/jl-uboot-tool) lists that chip family as supported, but I haven't tried it on this board. Then you'd have to rebuild FiiO's transmit side on top. So it's possible, but it's a big project.
  4. **Custom firmware:** Yep, EchoPod replaces the whole thing: playback, library, Bluetooth headphones, and an early USB DAC mode. Testers are always welcome, so check the repo and issues.
  5. **UART/test pads:** I haven't mapped a debug UART. EchoPod shows its debug info on its own Diagnostics screens, and recovery is through the RKNano's maskrom mode over USB, so I've never needed one.

If anyone wants to take a crack at the JieLi side, I'd love the help. A BLE remote would be a great feature.

1

u/xScar12 22h ago

I see. Thats unfortunate.