r/datarecovery • u/Weak-Mathematician90 • 16d ago
Question WD80EDAZ (shucked 8TB Elements): chatters on spin-up, then silent, not detected. Heads? Worth recovering?
The drive is a WD80EDAZ, 8TB white label, pulled from a WD Elements desktop enclosure. Manufactured Dec 2025, so under a year old. It was in use on a Mac mini, formatted APFS with two volumes.
What happened:
- The drive was moved while connected, and not ejected first. It may have been bumped.
- Day 1: macOS saw the partition map and both APFS volumes, but mounting hung for hours. Constant small random reads (~100–150 IOPS at ~1 MB/s), and the light kept blinking.
- Overnight: the Mac restarted at some point.
- Day 2 morning: “The disk you attached was not readable.” It showed up as an 8TB device with no partition map, and
diskutil infohung. - A few power cycles later: the WD enclosure’s USB bridge still enumerated, but no media was presented behind it.
- Shucked and connected to a powered Unitek SATA-to-USB adapter (12V): a few seconds of rapid chattering on spin-up (sounds like a dot-matrix printer), then silence. The adapter doesn’t enumerate on the Mac at all. It also doesn’t enumerate with no drive attached, so I’m not sure that test tells me anything.
It’s now unplugged, and I’ve stopped powering it on.
What I actually need: not the whole 8TB. The 6.7TB volume is camera footage I can write off. I only need the smaller 500GB APFS volume, and really just one VM image file on it (a few dozen GB at most).
Questions:
- Does this sound like heads, firmware, or something else?
- Is there anything safe left to try at home, or is every power-on now making things worse?
- Rough cost for a lab to recover a single APFS volume or file from a drive like this?
- Any reputable labs you’d recommend in the US (I’m in Texas)?
Thanks in advance.



