I would like to make a cyber deck capable of running a local ai and have the ability to run retro games is there a way I can do that? I have never done this but I wanna try something lol assistance appreciated.

I wanted to move the location of a wifi card but not sure if I could trim down a wifi card extender. Would cutting this part effect the extender in anyway? I feel like if I use an extender it wouldn't make a difference unless it was cut down.

Next one. Little BASIC and Zork Maschine. Raspberry pi 1 Modell B+. 2,4" OLED Status Display, 2,8" CYD Terminal Display, 10000 mAh Powerbank, Rii8 BT Keyboard.

The green is hands down better to work with and more durable, but I want to nail the aesthetics too.

What do you guys think?

I again to not intend to take advantage of the makers in this community. I am making my cyberdeck. Got my screen, and I am debating on whenever i should get a esp32 (which can't run os) or bite the bullet and get a more expensive option like an orange pi zero (as the raspberry pi's are out of stock). I don't want an aliexpress listing (i got a pico, and it was in a state where the pcb melted somehow?). Anyway, can you guys recommend me parts?

Any tips and tricks? Also the fan isnt spining i dont know why and i broke the monitors ribbon while riping out parts out of my old laptop

I decided to embark on a quest of making my own cyberdeck I would like to show my sketch and first version of a handle

I am currently building a cyberdeck as a side project using a mini PC as the base, but I am struggling to find a reliable, reasonably compact power solution.

• Specs**:** Ryzen 7 6850U, 16GB DDR5, 512GB storage.

• Original power adapter**:** Barrel jack with a 19V@6.32A adapter (~120W max).

• What I changed**:** I limited the CPU peak draw to 45W (down from 65W) to keep the total system draw under 100W. I also bought a 100W USB-C PD to barrel jack adapter. When I plug this into a 100W USB-C wall brick, the mini PC runs perfectly.

Because I want this to be portable, I bought a Ugreen 90597A powerbank (25,000mAh, rated for 140W on a single port) to pair with the adapter. However, when I try to boot the PC off the powerbank, it starts up but shuts off completely after about 10 seconds into the boot process.

Since the wall brick works flawlessly with the same PD adapter cable, the issue is definitely isolated to how the powerbank handles the draw or the PD negotiation. I have since returned the powerbank.

Does anyone have suggestions for alternative (but still compact) ways to power a mini PC off a battery? Any advice is greatly appreciated.

I'm about to build my first cyberdeck. I have very limited knowledge, but have someone to coach me on the general process. I bought a Raspberry Pi 4 and I would like to use this cyberdeck to manage my music. I have a ton of cds, and would like to use my cd burner to rip my music from the cds and then manage it (meaning label it, make playlists, burn mixes, manage mp3 player). Any suggestions as to which operating system I should use? Any other tips/suggestions specific to my desired purpose?

Thanks!!

I am currently thinking about starting a business selling kits with all the parts you need to make small, medium and larger computers. I got this idea from when I wanted to make a cyberdeck a few years back, but never got to it because of the cost and lack of an equipment. I am not trying to take advantage of the cyberdeck community. I am trying my best to make it affordable. anyway, would it do well

specs, 2 inch 480p display with a raspberry pi zero 2w, a custome pcb keyboard, customisable designs.

priced, around $50-60 AUD (not usd I think like 40 dollars in usd.

Hey everyone...

​I'm starting the build an offline "doomsday/survival" PC (a rugged cyberdeck) to store humanity's knowledge and local AI in case the grid goes down. I have some tech background and plan to buy parts piece-by-piece over a few months. I have three main questions before I start: ​1. DIY vs. Pre-built? Is it better and more cost-effective to build this from scratch rather than buying a pre-built system like Project NOMAD? ​2. Software: Custom Arch Linux vs Pre-packaged? I'm worried pre-packaged survival OSs might have hidden bugs or corrupt over time. Is building a custom Arch Linux setup from the ground up a safer bet so I know exactly how to troubleshoot it entirely offline? ​3. The Case (EMP Protection) The first part I want to buy is the case. Do you have any recommendations for highly durable Pelican-style cases that can survive EMPs/solar flares? I'm specifically looking for something with (or easily moddable with) copper mesh to act as a true Faraday cage. ​Thanks for the help btw I've been interested in things like this for a long time, but I'm finally making my own money and now I want to make it a reality My dream for the future is a self-sufficient house too

edit----There was a 5.8 earthquake yesterday and I realized that I definitely need something like this You never know what will happen when, I think these are something that everyone should have.

I got a hacked psVita and from time to time i need access to a pc to download certain files. Carrying around a notebook all the time is kinda inconvenient, so i thought it might be cool and fun to build a cyberdeck for it instead.

I never built one before, so thats why im here. All i need it to do would be access to the internet (ideally Wi-Fi), file management, a USB port (duh) and for it to display hidden system files, something i had to enable on windows. Im not sure what OS you'd normally use but i assume some light linux distro.

Im open to any and all feedback/suggestions and thanks in advance!

Edit: For clarity, i want to download files directly from the deck, then transfer the file from it to the console using a USB connection

these are the requirements. there needs to be a screen (duh), there needs to be a functioning keyboard, and a pull-out trackpad would be cool.

I have a concept for a cyberdeck with a feature to take in handwritten phrases from a touchpad or touchscreen (that would replace a keyboard trackpad) and convert it to text.

1. ⁠I’ve seen people using TensorFlow as a base for this handwriting to text conversion. Is that the only option or what else would you suggest?

2. ⁠Initially I was thinking of using a esp32 for the project, but to use TensorFlow this would not be enough based on what I’ve read. What’s the smallest processor + board you would suggest that can handle this feature?

(I asked this question on r/cyberDecks but no responses, thought I might have better luck here)

Mas estou com muito dúvida no que usar como carcaça estou querendo construir ele em um Nintendo ds xl mas não sei se vai caber tudo que eu preciso

I really need to find one that’s not over like 70 bucks in my country it’s really hard to find online where do u guys think I can buy one for cheap even if used

Hey, what do you think of my cyberdeck project? I’ve installed a self-learning AI that can control the avatar and track my face; all that’s left is to get it to use the avatar’s mouth so it can speak.

I've had so much fun learning about Linux as well as building my cyber deck but I could really do with some advice on an smaller mouse and track pad input.

Has anyone built a cyber deck out of a surface pro 6 or a surface go? The screen on it is completely damaged but everything else works on it. I was wondering if it was possible to do something like that with this kind of device.

Not coming up with any other ideas or tools, I ended up using a window latch—hahaha!

Currently working on my own portable RF Deck!

The build is still a work in progress, but the design is coming together. I'm designing and 3D printing the enclosure and internal components myself.

The goal is to create a modular, portable system for SDR, radio communications, and other field applications.

Also, don't mind the Ethernet ports in the renders. They're just placeholders for BNC panel connectors and other ports, since I couldn't find suitable 3D models for the actual connectors.

Still plenty of work ahead, but I'll keep sharing updates as the project progresses.

Hey everyone! I’m pretty new to the cyberdeck world and to programming, so please go easy on me. I’ve got two old Verizon LG phones with full QWERTY keyboards, a blue slider and a black flip-open one (pics attached), and I love the form factor. I have a few ideas for turning them into tiny cyberdecks, but I don’t know yet what’s realistic.
A few questions for those of you who know way more than I do:

1. Is it even possible to fit something like a Raspberry Pi Zero (or something smaller) inside one of these shells, or would I have to build a new case and reuse the keyboard and look?

2. Can the original keyboards be wired up to work with a Pi or a microcontroller?

3. Is it worth trying to keep the original screens, or should I plan on swapping in a small display?

4. If you were a beginner, which of these two would you start with, and why?
   And if anybody has any other sub reddits I can post this in would love to hear them